http://www.ec21.com/ec-market/morse.html http://springits.en.ec21.com/Morse_Taper_Reamers--1859777_3365167.html We supply Straight Shank morse taper reamers or Taper Shank morse taper reamers; Finishing or Roughing morse taper rea20090616 http://frankpan06.en.ec21.com/DIN2185_DIN2187_Morse_Taper_Shank--1681444_2546889.htmlDOVETAIL CUTTER AND INVERTED DOVETAIL CUTTER Dovetail cutters are provided with 45°and 60°angles , available 20071228 http://dioimplant.en.ec21.com/SM_Submerged_Implant--3465824_3465876.html Morse Tapered Abutment is easier to insert along the internal 8 morse tapered surface Due to the wider fixture and a20090715 http://emm08cathy.en.ec21.com/CS6250B_Gap_bed_Lathe--3964358_3964197.htmlMorse taper of tailstock sleeve MT5 Travel of tailstock sleeve 150mm Cross adjustment 15mm MOTOR Power20091229 http://plywoodmachinery.en.ec21.com/Universal_Radial_Driller--3974606_4036598.htmlMorse taper of main shaft bore: 4 Movable stoke of main shaft: 270mm Distance from main shaft center line to post tru20091229 http://shwudong.en.ec21.com/Upright_Drill--3040403_3040427.htmlMorse No. 4 Range of rotational speed of the main shaft 52 80 105 160 210 260 320 400 530 800 1100 1650 Progression 12 20091225 http://czflydragon1026.en.ec21.com/Bench_Lathe--3873867_4012148.htmlmorse NO.5 morse Taper in sleeve NO.3 morse NO.3 morse Speeds number 8 or 16(pole changeable motor) (optional)20091217 http://sherryzhai.en.ec21.com/Radial_Drilling_Machine_Z3050_16--2810816_2811005.htmlMorse 5# 5) Main spindle travel: 315mm 6) Main spindle speed range: 25 - 2,000rpm 7) Number of main spindle speed ra20091215 http://wlchen.en.ec21.com/Radial_Drilling_Machine--3618629_3618650.htmlMorse) NO.6 NO.6 Spindle travel (mm) 400 450 Spindle speeds steps 16 16 Spindle speeds range (r/min) 16-125020091210 http://luochangjiang.en.ec21.com/Universal_Cylindrical_Grinding_Machine_M1432--3926623_3929894.htmlMorse signal 4 fixed headstock main bearing hole taper Morse signal 5 electrical machine gross capacity 13kw 20091110 http://precotools.en.ec21.com/Sleeves_Collets_Drill_Chucks_and--2627231_2627249.html Morse Taper Sleeves Hardened and Ground Throughout, DIN-2185 Outside Taper Inside Taper Model No. 1 &20091019 http://hench2005.en.ec21.com/BSI_Standards_Cheapest_Original_1--3860291_3860299.htmlMorse taper BS EN ISO 14855-2:2009 BS EN ISO 14855-2:2009. Determination of the ultimate aerobic biodegradability of pl20091010 http://hench8888.en.ec21.com/BSI_Standards--3849717_3849739.htmlMorse taper BS EN ISO 14855-2:2009 BS EN ISO 14855-2:2009. Determination of the ultimate aerobic biodegradability of pl20090928 http://btjdlj128.en.ec21.com/Bench_Center--2846392_2846901.htmlMorse No. 2 finial 60 cone surface to the Morse cone 0.005mm 2. The parallelism between the finial axle within the sco20090627 http://evershiningcnc.en.ec21.com/CNC_Machine_for_Plate_Drilling--2925974_2925975.htmlMorse taper-shank, taper No. 3 Total power (kW) 8 10 15 Overall dimensions (LxWxH)(m) 2x1.8x2.6 3.4x3.1x2.8 4x3.7x2.57 20090603 http://szpolytop.en.ec21.com/Engine_Lathe--3552854_3555855.htmlMorse No.5 No.5 Spindle speed steps 8 8 Spindle speed scope 70 2000 r/min 70 2000 r/min Inch thread 3120090518 http://allturkmal.en.ec21.com/Pneumatic_Eccentric_Press_by_HydraSan--1175286_2143628.htmlMorse diameter/ Kolbendurchmesser mm 50 70 Head dimensions/ Kopfdurchmesser mm 420x250x560 520x280x695 Table 20090513 http://jerry3385.en.ec21.com/Bench_Center--2007638_2008034.htmlMorse No.2 finial 60 cone surface to the Morse cone 0.005mm 2. The parallelism between the finial axle within the scop20090508 http://shenghongindustry.en.ec21.com/Lathe_C6246x1500--2595567_3399932.htmlMorse taper of tailstock sleeve No.4 Morse Cross adjustment 13mm( 12") MOTOR Power of main motor 4kw(20090311 http://slinda99.en.ec21.com/Taper_Shank_Twist_Drill--2764593_3071582.html rolled or milled; TIN / bright/black..................................taper shank twist drill.........................20090217 http://switch0021.en.ec21.com/Encoder_Switch--557015_3168425.html Morse Elec. encoder switch - enables to select modes in drum laundry machines, dish washers, gas oven ranges - comes 20081216 http://220202198506174827.en.ec21.com/Bench_Center--2978462_3148981.htmlMorse No.2 finial 60 cone surface to the Morse cone 0.005mm . 2 The parallelism between the finial axle withi20081213 http://oilpresses.en.ec21.com/Garnet_Powder--3028565_3029244.htmlColor: Bronzing Bulk density: 1.68-1.95(g/cm3) Morse Hardness: 7-8 Specific Gravity: 3.95(g/cm3) 20081201 http://dentis.en.ec21.com/Dentis_Mini_Implant_System--2008554_3164986.htmlMorse taper connection between the implant and the abutment offers the friction locking and sealing Torque Recommendati20081202 http://yanjuan19861234.en.ec21.com/Radial_Drilling_Machine--2847012_2983030.htmlMorse taper of main shaft bore 4 Movable stoke of main shaft 300mm Distance from main shaft centerline to post trun20081121 http://yongqingda.en.ec21.com/Precision_NC_Live_Center--3147439_3147484.html Detailed Product Description morse taper L A B D DO d Accuracy radial load (KG) limit speed (R.P.M) W20081121 http://irene1205.en.ec21.com/Mobile_Radio--1669118_3109940.htmlMorse Code. Keyboard entry of frequencies directly from microphone is supported. It also supports one-touch access to Y20081031 http://ningbotop.en.ec21.com/9_IN_1_Super_Flare--3046727_3047992.htmlMorse code) and solid-on (lantern). Runs up to 100 hours on the replaceableCR-123 nonrechargeable batteries or up to 3620080923 http://shangmei.en.ec21.com/Rubber_Roller_Milling_Machine_SM25CNC--2991777_2991800.htmlmorse) No.3 Sand wheel revolution(r/min) 0-2300 Revolution of main shaft of work head(r/min) 0-1000 S20080905 http://tobyshao.en.ec21.com/Vertical_drilling_machine--590745_590798.htmlMORSE) NO.3 NO.3 NO.4 NO.4 SPINDLE SPEEDS (RPM) 80?2800 (12 STEPS) 64?2280 (12 STEPS) 50?1800 (STEPS) TABLE SIZE (L?W) 20080528 http://scwkwj.en.ec21.com/Tool_Adapters--2785248_2029895.htmlWe supply kinds of tool holders including: Morse Taper End Mill Adapters, R8 End Mill Adapters, B&S Taper End Mill Adap20080505 http://xu2007xxp.en.ec21.com/CNC_Tool_Holder_System--2595097_2595170.htmlWe have these mainly series: collet chuck; ER straight shank collet chuck; collet; Milling chuck; Morse taper holder; D20080123 http://johnmorris.en.ec21.com/Multi_LED_Aluminum_Flashlight--852979_876142.htmlMorse and continuous Body Aircraft grade Aluminium, anodized Water resistant Splash proof Colour Black (standard), othe20050629 http://wyycjs.en.ec21.com/Drilling_Machine--788400_788409.htmlMorse No.3 Spindle speed r/min 175, 425, 687, 960 Travel of spindle mm 130 Swivel angle of arm deg 360 Size of table (L20050714 http://ramjas.en.ec21.com/Measuring_Marking_Precision_Tools--896570_1281727.htmlWe at Goldy Industries ( Website: http://www.goldyindustries.com ) wish to introduce ourselves as leading Industrial Go20060429 http://aison.en.ec21.com/Power_Diet_Shoes--1367420_1367957.htmlmors of increase. It improves the overall muscles of the body. It strengthens the lower body muscle and straightong the20060627 http://insungcorp.en.ec21.com/Drilling_M_C--1219724_1219756.htmlMORSE TAPER IN SPINDLE MT #5 #5 #5 #5 NUMBER OF SPINDLE SPEED step 9 12 12 16 RANGE OF SPINDLE SPEED r.p.m 48-1,500 34-20060821