Sell TOYOTA KEY Maker for 4D chip

Sell TOYOTA KEY Maker for 4D chip	Total 56 Related Items Prev Next


Date Posted :	2009/08/13

Category :	Automobiles & Motorcycles > Interior Accessories > Other Interior Accessories

Offer Type :	Sell

View Larger Picture

Autotop Technology Co.,Ltd

Membership Type : Free member
Registration Date : 2009-07-06
Country/Region :

China
Address : xixiang road ,baoan district,shenzhen,China Shenzhen Guangdong, China
Phone : 86-0755-21630536
Fax : 86-0755-21630536
Contact : Grace Xu

View all selling leads of this member(56)
View all products of this member (15)

Check this company's business credentials, background and level of reliability

The programmer design simple, and operate easily through OBD directly and no need to press any button. Support all Toyota 4D chips, with the original key programming protocol, non-general initialization protocol.

Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.

The operating step as follows: ( read the using step and the importance notice carefully)
  1. Turn the ignition on with the right 4D chip key.
  2. Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the "LED" is on, as well as the anti-light "SEC", which means the car is in the "key programming state".
  3. Take away the programmer from OBD.
  4.1.Matches 2 pcs main key and 1 pc vice-key to the IMMO computer ( Notice: 2 new main key and 1 vice-key are needed to close the programming procedure)
     a) Close all the car door.
     b) Insert the first new main key to the ignition for 5 seconds.
     c) Insert the other main key to the ignition for 5 seconds.
     d) Insert the vice-key to the ignition for 5 seconds.
     e) The new ignition key will be confirmed by the new IMMO.
   4.2.Only program 1 or 3 main keys to the IMMO computer( Manual close the mode after complete the programming)
     a)  Close all the car doors.
     b)  Insert the new key for 5 seconds.
     c)  Insert another new key for 5 seconds.
     d)  Take out the key from ignition
     e)  Insert the first programmed main key, and turn on the ignition for 5 times quickly, then take it out.
     f)   The new ignition key will be confirmed by IMMO

Related Keywords: auto key, auto key programmer, TOYOTA KEY Maker, auto maker

Other Selling Leads of this member (55 more)

Sell TOYOTA KEY Maker for 4D chip

Sell BeePROG Universal Programmer

Sell CAN and BDM CAS3 9S12 Programmer

Sell BMW CAS3 PROGRAMMER