Sell pneumatic actuators RT series
Date Posted :
2012/03/29
Offer Type :
Sell
Pneumatic Actuator Key Feature
-Direction of rotation can be optionally changed from clockwise(CW) to anti clockwise(CCW)
-End-position sensor and limit switch box can be mounted directly to the actuator
-Suitable for manual on-site use, as well as automatic operation
-Port pattern to Namur VDI/VDE 3845 for mounting solenoid valves
-Highly corrosion resistant
Standard operating conditions
1.Operating media
Dry or lubricated air or the non-corrosive gases.
The maximum particle diameter must be less than 30um
2.Air supply pressure
The minimum supply pressure is 2.5 Bar
The maximum supply pressure is 8 Bar
3.Operating temperature
Standard tempature range: -20 -+80
4.Travel adjustment
Standard travel adjustment: +/-5 for the rotation at 0 and 90
5.Application
Standard application: Either indoor or outdoor
Related Keywords : pneumatic actuators,valve actuators,quarter turn actuators,pneumatic device
Other Selling Leads of this member (19 more)
- Sell valve positioner
- Valve position key feature: 1, There is no resonance in the range of 5~200Hz. 2, Performing Split Control without any other substitutes. 3, Easy to adjust zero and span. 4, Easy to convert from Reverse Action to Direct Action or vice versa. 5, E...
- Sell electric actuators
- Electric actuator key features: 1. Due to characteristics of valve, the electric actuator must be able to provide high start up torque with full load whenever the valve is at open, closed or any other position. NUTORK NTE series electric actuators a...
- Sell gear boxes
- Feature 1, Easy connection: There are two keyway apart 90, In the inner hole of worm gear so as to be convenient for customer to choose relative position between gear operator and valve. 2, Easy operating: Pull out the position pin and rotate off c...