- TC5710-6T
2.1 45 m lifting load characteristics(TABLE 8-1)
Table8-1
R(m) |
2.5~15.27 |
17 |
19 |
21 |
23 |
25 |
27 |
29 |
31 |
33 |
35 |
Q(t) |
a=4 |
6.00 |
5.32 |
4.69 |
4.19 |
3.78 |
3.43 |
3.14 |
2.89 |
2.67 |
2.48 |
2.31 |
a=2 |
3.00 |
R(m) |
37 |
39 |
41 |
43 |
45 |
|
|
|
|
|
|
|
Q(t) |
a=4 |
2.16 |
2.03 |
1.91 |
1.80 |
1.70 |
|
|
|
|
|
|
|
a=2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.2 51 m lifting load characteristics(Table8-2)
Table8-2
R(m) |
2.5~14.10 |
15 |
17 |
19 |
21 |
23 |
25 |
27 |
29 |
31 |
33 |
35 |
Q(t) |
a=4 |
6.00 |
5.59 |
4.86 |
4.28 |
3.82 |
3.44 |
3.12 |
2.85 |
2.62 |
2.42 |
2.25 |
2.09 |
a=2 |
3.00 |
R(m) |
37 |
39 |
41 |
43 |
45 |
47 |
49 |
51 |
|
|
|
|
Q(t) |
a=4 |
1.96 |
1.83 |
1.72 |
1.62 |
1.53 |
1.45 |
1.37 |
1.30 |
|
|
|
|
a=2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.3 57 m lifting load characteristics(table8-3)
Table8-3
R(m) |
2.5~13.05 |
15 |
17 |
19 |
21 |
23 |
25 |
27 |
29 |
31 |
33 |
35 |
37 |
Q(t) |
a=4 |
6.00 |
5.12 |
4.44 |
3.91 |
3.49 |
3.14 |
2.85 |
2.60 |
2.39 |
2.20 |
2.04 |
1.90 |
1.77 |
a=2 |
3.00 |
R(m) |
39 |
41 |
43 |
45 |
47 |
49 |
51 |
53 |
55 |
57 |
|
|
|
Q(t) |
a=4 |
1.66 |
1.56 |
1.46 |
1.38 |
1.30 |
1.23 |
1.17 |
1.11 |
1.05 |
1.00 |
|
|
|
a=2 |
2.4 Technical parameters table:
mechanism |
Hoisting mechanism |
M5 |
Slewing mechanism |
M4 |
Trolleying mechanism |
M4 |
Hoisting height (M) |
Rate |
Independent |
Anchored |
α=2 |
40 |
140 |
α=4 |
40 |
80 |
Max.working weight (T) |
brachium 57m |
brachium 51m |
brachium 45m |
6 |
6 |
6 |
range (M) |
Max.working range |
57 |
Min.working range |
2.5 |
Hoisting mechanism |
Rate |
α=2 |
α=4 |
Speed(m/min) |
8.4 |
40 |
80 |
4.2 |
20 |
40 |
load weight (T) |
3 |
3 |
1.44 |
6 |
6 |
3 |
Power(KW) |
5.4 |
24 |
24 |
5.4 |
24 |
24 |
Slewing mechanism |
Motor type |
YZR motor |
Speed (r/min) |
0.6 |
Power |
5.5KW |
Trolleying mechanism |
Speed(m/min) |
20 |
40 |
Power(KW) |
2.2 |
3.3 |
Hydraulic jacking mechanism
|
Speed(m/min) |
0.55-0.7 |
Working pressure(Mpa) |
25 |
Power(KW) |
5.5 |
Balance weight |
Boom length (M) |
Balance weight (T) |
57 |
13.8 |
51 |
12.3 |
45 |
10.8 |
Total power (KW) |
33( Excluding motor power lifting mechanism ) |
Operation temperature (℃) |
-10℃~40℃ |
e[MRdr���+�e; border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt; mso-border-top-alt:solid windowtext .5pt;mso-border-left-alt:solid windowtext .5pt; mso-border-alt:solid windowtext .5pt;padding:0cm 5.4pt 0cm 5.4pt;height:15.75pt'>t
33
1.3 Payload Capacity Form
FM5010 tower crane moment curve(2 rates)
FM5010 tower crane moment curve(4 rates)
1.4 power parameter:
1.4.1 total machine power
:single29.9kw/double31.8kW
1.4.2 voltage
: 380V±10%
1.4.3 power frequency
:50Hz
TC5710 self-elevating tower crane is my company based on market need to design a new generation of self-made rise tower crane.
TC5710 horizontal jib tower crane, trolley, switched back on l multipurpose tower. The machine features are:
a. Performance parameters and technical indicators leading domestic and international advanced level in the new century, the maximum working range 57m, maximum lifting height of 140m.
b. Overall outlook for the international pop style, very beautiful, deeply domestic and foreign users.
c. Work, a wide operating range. The machine has a variety of installation in the form of foot type, bolt type fixed, adhesion, etc. Long boom has 57m, 51m, 45m three kinds of arm length, maximum weight of 6t. Rated load moment 630KN.m (63t.m). The aircraft industry, space and existing QTZ80 tower crane in the same grade, you can order a small generation of large sets of classes greatly reduced the cost of construction equipment, is to save energy, reduce traffic and using the best construction crane machinery .
d. Working speed, good speed performance. The machine uses far hoisting mechanism is better than three-speed motor drive, the maximum lifting speed of 80m / min, the minimum speed is less than 4.2m / min, in order to achieve a light load high-speed, heavy-duty low and ideal speed and slow on the empty hook bit rate, greatly improved work efficiency. Slewing mechanism, there are two types, one is the use of eddy current speed, brake torque DC motor; another using YZR motor, the hydraulic coupling, drive gear, disc brake. Have a greater overload and excellent performance under heavy load start. Make tower crane, brake more stable, more secure and reliable operation.
e. Plus elevated section of the tower crane, using hydraulic jacking, so since the height of the tower crane can be increased with the increase of the building and up, while lifting the performance of the tower crane at various heights remain unchanged. Cab mounted on the upper part of the tower crane, vision, comfort and easy operation.
f. Tower crane has a variety of safety devices, including: lifting torque limiter, the maximum lifting weight limiter, rotary limit switch, horn stopper and height limiter, thus ensuring the safe and reliable operation of the tower crane.
g. Boom, arm and swing the balance when the tower is installed using a quick connector in the form of installation. Convenient, accurate position, greatly reducing the labor intensity and danger and truck crane lifting time.
TC5710 tower crane parameters jack-advanced, reliable performance, attractive appearance, reasonable structure, excellent quality, with simple, practical, affordable outstanding advantages, but also to adapt to requirements of high-rise housing construction, high-rise industrial buildings.