Search Advanced Search

There are 60 grp water tank from 44 suppliers on EC21.com

Related Searches : machine, machinery, oil purifier, filter, hardware, cutting machine, oil recycling, oil filter

GRP Water Tank(Grp Panel Tank)

Contact Now* Send an Inquiry to this supplier.
  • Share to :
  • Pinterest

Description

Features of GRP Water Tank

Excellent in Clean & Hygienic and, Non-leakage. Sectional GRP Water Tank for Easy to Design and Installation. GRP Water Tank always keep clean water. Samsung Sectional GRP Water Tank is designed to satisfy the basic requirements by using Glass Fiber reinforced Panel.

Wide Range of Availability
Available in various sizes to meet any customer demands.

Clean & Hygienic
No corrosion from panel and prevent bacterial growth by isolating outside light.

Leakage-Free
The special sealing tape developed for joints ensures zero leakage.

Dimensional Accuracy
Sectional GRP panel sizes are changeless from the outside condition so easy to assembly

Intensity & Durability
To maintain best endurance, the glass fiber reinforced panel is molded under high temperature & pressure. Since using stainless steel for inside structure and plated steel for outside, it shows best performance against erosion.

Heat Insulation and Dewdrops Prevention
The heat insulation panel with 3 layer structured improves heat insulation effect. Protects water from dewdrops and minimizes temperature variation of the stored water.

Easy to Assembly and Moving
Sectional panels make construction time shorter, standardization panel make easier to moving, carrying in and transfer.

Design Standard

Intensity and Endurance
Section
Design Standard
Hydrostatic Pressure
Water pressure enforcement 3.3 times standard
Transfomation rate in filled up with water : Less than 1% form Water tank Height
Wind Force
Less than 60m/sec
Earthquake Force
Horizontal Intensity kh = 1/3G
Snow load
200kg/cm3 , Snow fall less than 1M
Ilumination Rate
Less than 1%
Out-fit Force
No leakage under condition of vertical 100Kg after install of 100A Fitting
Water Temperature
Usable temperature : Under 30°C Limited temperature : Under 40°C

 

Range
Range
Available Design Conditions
Height
1.0 ~ 5.0M
Capacity
1 ~ 3,000 ton
Shape
Square, ㄱshape, ㄴshape, ▣shape etc

 

Thermal Conductivity
Goods
Thermal Conduction Kcal/mhr°C
non-Insulation Type
Insulation Type
Stee. STS
37
37
GRP
0.15(Over 370 times)
0.017

Panel Tank Parts and Assembly

 
PVC Nozzle(Flange type)
Size : 20A ~ 150A
Standards : JIS 10 K
FC Nozzle(Male threaded type)
Size : 20A ~ 150A
Standards : JIS 10 K
Gun Metal Nozzle(Screwed type)
Size : 13A ~ 80A
Air Vent
Material : ABS
Size : 50A x 180mmH, 100A x 210mmH
Assembly bolt
Material : Zinc plated mild steel or SS304
Size : 10mm
Electrode Seat and Cover
Material : PVC
Size : 50A

Structure

Excellent Heat Insulation

GRP panels protect water condensation in the tank and minimizes temperature variation of the stored water to prevent dewdrops phenomenon.


The 3 layer heat insulation panel minimize the heat losses and maintain its contents in its original form.


The heat insulation panel with 3 layer structured filled with Poly-Urethane foam shows its best performance.

capapcity
Classification
Temp. of Atmosphere
-10°C
-20°C
-30°C
16ton
single layer type
35
20
13.5
insulation type
164
81
58.5
1ton
single layer type
11
6
4
insulation type
37.5
23
13.5

Optional Water Inspection Window
Developed for easy water condition check from outside of Sectional GRP water tank by not using ladder.


Physical Properties

GRP Panel's Physical Properties/Basis on KS F 4811

  1. Tensile Strength - 850kg/cm2
  2. Flexural Strength - BS 2782 Part 10 Method
  3. Flexural Modulus - 12.0GPa
  4. Water Absorption Rate - <0.20%
  5. Barcol Hardness - Over 40
  6. Glass Fiber Content - >30%

Material Characteristics and Specification

  1. Specific Gravity - 1.39-1.7
  2. Impact Strength - 50kg/cm2
  3. Shore Hardness - D90
  4. Shear Strength - 830kg/cm2
  5. Thermal Expansion - 2.1 x 105 ASTM D 696-79
  6. Thermal Conductivity - 0.15 cal/m.hr C BS 874 Part2 - 1986 Sec.2.1
  7. Overall Heat Transmission - 0.6W/M2K
  8. Light Transmission - BS 2782 : Part 11 Method 11043
  9. Insulation Thickness - 40mm RUF
  10. Insulation Over Material - ABS
FEM
Safe and robust panel construction is designed considering the stress concentration on the panel when load is applied by FEM.

 

High Quality Water Tank
We always ensure all safety requirements such as strength, durability and stability with rigid design regulation and quality control

 

Special Sealing Tape for Water Tight Joints/Bottom Drain System
-Specially developed sealing tape ensure leakage free water tank.
-The dome shaped bottom panel with a concave drain panel facilitates complete and quick drainage.

SAMSUNG Panel Tank Manufacturing Technology

There are 2 basic methods for the manufacture of panel tanks : GEP and SMC
Samsung utilises its exclusive GRP method. The GRP method introduced by Samsung and it continues to be the most superior method of manufacturing today.
On the other hand, other manufacturers employ the SMC method. The difference between these two methods is that the GRP method uses long continuous strand fibreglass, adding resin and then submitting the mixture to pressure before the final moulding process. The SMC method used by all other panel tank manufacturers mixes short-chopped strand fibreglass and resin in a "clay-like" mixture.
In terms of product characteristic, this means that panels manufactured under our GRP method are not only thinner and lighter, but the long continuous strand fibreglass maked them a product far superior in strength to all others.
Through our hot press moulding method, stability in product quality is asured even high volume production.

Physical property Comparison

 
Samsung
SMC
Hand lay-up
Comparison
GRP
Company A
Company B
Tensile
strength
(MPa)
85~105
58.8~100
39.2~68.6
GRP tanks attain Singapore Standard "SS245"
at 6 times working pressure under hydrostatic
pressure tests.
Bending
strength
(MPa)
170~220
117.6~161.7
64.2~156.8
Other companies' products are harder, containing
about 40% filler, negatively influencing both impact
and repetition strength tests.
Water
absorption
coefficient
Below 0.1%
Over 0.3%
0.20.3%
The superiority of the initial strength of
GRP products is additionally evident in its
durability over the long term.

The Different Fibreglass Using in Panel Tanks

Product Image

  • GRP Water Tank(Grp Panel Tank)

Send an Inquiry to this supplier

GRP Water Tank(Grp Panel Tank)

GRP Water Tank(Grp Panel Tank)

Send an Inquiry to this supplier
* From
  To Mr. JANG HEE SE
Samsung MCP Co., Ltd.
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other Manufacturing & Processing Machinery
* Messages

Use English only Max. 2000 characters. (Min. 20)

Send
Search

Browse: Manufacturer Directory Countries China India Korea Premium Suppliers Community Site Map

About EC21 Contact Us Terms & Conditions Report Item Online Trading Risks Product Listing Policy

中文 繁體 한국어 日本語 Español Русский Français Deutsch

Copyright (c)1997-2014 EC21 Inc. All Rights Reserved. EC21 in KoreanChinese

Business Registry Number: 120-86-03931

Inquiry Basket ()