Price
Supplier Info.
Report Item
Your report on Product(s), Selling Lead(s) will be sent to EC21 Administrators once submitted.
Then, Administrators will investigate and then take appropriate actions.
Contact Supplier
Product Description
Brief Introduction of LB800 Asphalt Batch Mixing Plant
LB800 asphalt mixing plant is quite popular for its compact structure, reasonable layout and stable
performance. This model asphalt plant is ideal for small road construction projects. LB800 asphalt
mixing plant is easy to install and dismantle with short transport period for its modular design.
Compared with other large asphalt plant equipment, LB800 asphalt plant provide oil furnace
heating and free heating burner for choose and bag house and water dust collector for choose.
Main Technical Parameters of LB800 Asphalt Batch Mixing Plant
Model |
LB800 |
|
Capacity |
64t/h (standard working condition) |
|
Mixer Capacity |
800kg/batch |
|
Drying Drum |
Φ1200*6300mm |
|
Fuel Consumption |
Diesel: 5.5-7kg/t; Coal:10kg/t |
|
Measurement Accuracy |
Aggregate |
±0.5% |
Filler |
±0.5% |
|
Bitumen |
±0.25% |
|
Finished Asphalt Temperature |
130℃-165℃ |
|
Dust Collector |
gravitational dust collector & Second baghouse dust collector |
|
Air Emissions |
≤20mg/Nm³ |
|
Dark exhaust standard |
Ringelmann I |
|
Working room noise |
≤70db(A) |
|
Environment noise |
≤80db(A) |
|
Operation |
Full Auto/Manual Operation |
|
Total Installation Power |
≈199kW |
|
Voltage |
220V/380V-50Hz (adjustable) |
|
Plant Covering Area |
Length: 25m; width: 20m; max height point: 14m |
Components of LB800Asphalt Batch Mixing Plant
•Cold Aggregate Feed System
5 cold feed bins,the feeding belt conveyor adopts frequency control; each cold is equipped with
sound-light alarm device for material shortage and the cold feed bins are also equipped with mesh
to keep off the oversized aggregate.
•Drying System
The dryer adopts friction drive which runs smoothly; the drying drum is covered by rock wool isolation
work with stainless steel. And the main body of dryer adopts heat resistant steel plates which ensure
the long working life.
•Burner
Multiple burners are available for your choosing, such as coal burner, oil burner, and gas burner. All
burners are specially designed to match with the asphalt mixing plant and facilitate production.
•Dust Collection System
The dust system is combined primary cyclone dust removal and secondary bag house system. The
bag house is equipped with dust humidification mixer which further reduces the pollution. The emission
concentration is less than 20mg/Nm³.
•Mixing Tower
Modular design provides convenience in disassembly and tranport, and reduces installation time.
Auto lubracted bearings greatly minimize the failure rate and 3 point pull type weighing sensor guarantees
accurate weighing and stabile performance.
The vibrating screen has 4 decks and 7 compartments and the meshes are made of wear resitant steel.
•Control System
The brand SIEMENS has low-voltage protection and overload protection function.
Manual and automatic operation modes can be switched with each other.
Spacial room has solid wood floor and sound insulated walls.
•Vibrating Screen
1. High abrasive mesh (65Mn), long life, and low maintenance cost. Optimized design shields against
dust spills, more environmentally friendly.
2. Quick and easy to replace pull-out screen fixed by locking bolts. In the case of both sides are equipped
with amplitude direction signs, shaker shell around a door. Discharge end bulkhead adopts modular design,
easy to maintain screen via rail.
•Bitumen Weighing Device
1. Bitumen pump jet grouting, made the bitumen distribute more uniformity.
2. The tank outer adopts insulation device to prevent thermal loss.
3. The thermal oil heating device at the bottom can effectively prevent the bitumen temperature dropping.
4. Adopts primary weighing and secondary accurate discharge weighing, made the bitumen weighing
more accurately.
Configuration of LB800 asphalt Batch Mixing Plant
1.Cold Aggregate Feed System: 4*4 m3 storage bins
2. Drying Drum: Φ1200*6300mm
3. Oil Burner: made in Italy, capacity: 500kg/h
4. Dust Collection System: water collector
5. Filler Supply System: 0.5m3 filler bin (adjustable)
6. Bitumen Supplying System: 1*20m3 bitumen tank (adjustable)
7. Mixing Tower: 800kg/batch twin shaft mixer, 22kW Siemens’s motor
8. Pneumatic System: 1.05Nm3/min air compressor
9. Finished Asphalt Storage Bin: 30t storage bin under mixer
10. Control System: PLC control system(language for optional)
Advantages of LB800 Asphalt Batch Mixing Plant
1. Erection and testing prior to leave the factory
Our asphalt plant components are erected and all motors would be run through a test phrase before leave the factory.
2. Low transport costs
Each asphalt plant component is supplied in international standard container which means lowest fees and fast transport.
3. No concrete foundations
The ground area of the containers ensures plants stability on compacted soil.
Cases
(1)QLBY1000 Mobile Asphalt in Somalia
(2)LB1500 Asphalt Mixing Plant in Kaifeng China
(3)LB1500 Asphalt Mixing Plant in Chiang Mai Thailand
A. Asphalt Batch Mixing Plant: LB500, L800, LB1000, LB1200, LB1500, LB2000, LB2500, LB3000 and so on.
B. Asphalt Drum Mixing Plant: CAP20, CAP40, CAP60, CAP80, CAP120 and so on.
C. Mobile Asphalt Mixing Plant: YLB600, YLB800, YLB1000, YLB1500, YLB2000 and so on.
1. Rapid response to any inquiry.
2. Competitive price.
3. Professional inspection department to guarantee quality
4. Factory visit is welcomed and free booking hotel and airport pick up service.
5. Engineers will go to clients’ site for guiding the installation and test-running;
6. Spare parts supply,We will keep your know the complete data, when you need any spare parts,
we will send to you quickly.
7.15 months super long time guarantee period.
8. Customer-tailor is received
Q1:How to use this asphalt mixing plant?
A:As a professional asphalt mixing plant manufacturer,we have many professional engineers,
they will go to clients’ site for guiding the installation and test-running;also can teach you how to
use the mixing plant properly.
Q2:Can you sent me some spare parts freely?
A:Generally speaking,we usually sent customers the wearing parts when shipping the product,
but if you have a large order,we will consider to sent you some spare parts freely
Q3: What is the delivery time?
A:Usually can deliver within 35-50 work days
Registration Date | 2016/04/08(Year/Month/Date) |
---|---|
Buyer / Seller in EC21 | Seller |
Business Type | Manufacturer |
Year established | 1992 |
Employees total | 101 - 500 |
Annual revenue | USD 50,000,001 - 100,000,000 |
Company | Nanyang LiaoYuan Road Construction Machinery Co., Ltd. |
---|---|
Address | No.6 Yinhai Road Nanyang Loosen Industrial Zone, Henan,China.NanyangHenanChina |
Phone | 86 - 0000 - 18181818259 |
Contact | Dick Zhang |