Water Treatment Chemicals

PRODUCT BENEFITS

- Effective scale inhibitor with stabilizing effect which raises the crystallization threshold of the insoluble salts

- Enhanced dispersant properties help keeping the nucleus crystals in the form of a fluid sludge

- Crystallization modifier which stops assembly of calcium and magnesium salts scale build up

- Keep the systems clean and maintains the heat exchange capacity thus helps high beet processing and save fuel and steam

- Excellent thermal stability

- Easy handling

- Non-dangerous according to European legislation for preparations

- Is in compliance with:

• French list of auxiliary technologies for sugar industry - French decree of 06 Feb.1989 - Agreement n°:DT 0429
• FDA regulation 21 CFR 173.73.

PRINCIPAL USES

MAKS 9645 provides effective scale control in sugar juice evaporators in sugar mills. It is especially designed for beet processing plants where the juice is not or only partially softene.

MAKS 9645 prevents or limits the formation of hard scale by insoluble salts on the evaporator heat transfer surfaces and reduces so the steam consumption. Further will help keeping the highest evaporator throughput and production capacity and reduces or eliminates the need for chemical and mechanical cleanings with all associated problems in the process.

DOSAGE

The specific dosage of MAKS 9645 will vary depending upon the operating characteristics of the evaporator system, the juice quality and hardness as well as the severity of scale problems encountered. Typical dosage rates are 10-32 g/m³ sugar juice. Monitoring is done by the measurement of calcium salts by complexometric titration.

Your BIMAKS representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system parameters.  

FEEDING

In most applications MAKS 9645 should be injected continuously through dosing pump. It can be used in neat form (straight from the packaging) or in diluted form. Feeding can be automated by systems with on-line hardness measurement.

MATERIALS: Storage and application equipment (pumps, lines) should be made of stainless steel or plastic material like PE,PP,PVC with ethylene-propylene terpolymer (EPDM) seals. Do not use carbon steel, copper, aluminum or zinc in contact with the neat product.

HANDLING-STORAGE-SHIPPING

As a standard precaution with all chemicals we recommend the use of protective equipment such as goggles and rubber gloves when handling. Consult the Material Safety Data Sheet as the only official source of Environmental and Safety information.

The product can be stored for at least 24 months from date of shipping if kept in its original, unopened container and under normal warehouse conditions. Protect from freezing and from exposure to high temperature.

MAKS 9645 is available in non-returnable containers of different sizes.