Elevator Parts

NICE 3000, the elevator integrated controller, is under the research and development of and produced by Suzhou Monarch Elevator Corp. Ltd. It’s the new vector-based intelligent elevator integrated controller combining the elevator control with motor driver. NICE 3000 control system mainly consists of NICE 3000 elevator integrated controller, MCTC-CTB-A, MCTC-HCB-A, MCTC-GCB-A, and MCTC-IE-A.
Main features are as follows:
More advanced
NICE 3000 including computer technology, Automatic control technology,Network communication technology, and Motor vector drive technology, is the Intelligent Control System with the advanced international level.Direct stopping technology with the principle of distance control; N curves generate automatically.
 The cluster control with less than 8 elevators is based on fuzzy control theory.
 Many CPUs redundantly control and integrate the advanced Canbus,Modbus, GSM communication technology.
 It provides with abundant time-sharing control function with accurate
real-time clock built-in, thus it’s convenient for the buildings to fulfill the
intellectualized management.
 Flexible power failure rescue plans with either 48DC or 220VAC power
input.
 It supports automatic identification operation between short floors.
 Easier to use
 It is compact combining with the control and driver system, facilitating the
design of small elevator machine rooms and no machine rooms.
 The function parameters are designed easily, aiming to facilitate the
adjustment to the large extent.
- 5 -
 The considerate design of small keyboards makes it easier to check up,
maintain, and debug the elevator.
 It can weigh automatically according to the weight it bears.
 It supports many adjusting measures: computer monitoring software, PDA
monitoring, and operation panel.
 Safer and more reliable
 Multi-security is assured closely following the GB7588-2003 standards.
 Fault-tolerant design of hardware and software; many types of fault
treatment; maximize to eliminate accidents () to run safely.
 EU MP Laboratory provides professional testing to give all-round
confrontation against electromagnetic interference.
 All-round confrontation against fluctuations in power grids, dust, high
temperature and lightening.
 More comfortable
 Dedicated weighing compensating device offers near perfect compensation
start.
 High capability of vector control makes the motor performance well which
brings the feeling of comfort.
 More economical
 The integration makes the system easier to operate and cost less by
reducing the outside wiring in a large amount. It improves the elevator’s
security and stability.
 Canbus and Modus communication’s perfect combination reduces the
amount of cables in a maximum.
 Flexible and adequate module value-added accessories
 Series of built-in DC Reactor and Brake Unit
 Three wires can make the interconnect, and there’s no need of extra group
- 6 -
boards.
Instruction of Elevator Integrated Control Function, NICE 3000
Seria
l
Num
ber
Function Remark
Serial
Num
ber
Function Remark
Standard functions
1
Maintenance
Operation
41 Current aslant
remove
2 Direct stopping 42 User Preferences
inspect
3
The best curve
generated
automatically
43 Peak service
4 Self-rescue layer 44 Real-time clock
management
5 Drivers operate
45 time-sharing
services
6 Fire back to the
base station 46 Protect floor at
night
7 Firemen Operation
47 Drivers reversing
8 Test run 48 Deputy operation
panel operation
9 Independent
running 49 Car arrival chime
10 emergency rescue
running 50
Outside
destination
forecast light
Configure
MCTC-HC
B-B
11 re-leveling when
the door is open
Configure
MCTC-SCB-A 51 Outside arrival
chime
Configure
MCTC-HC
B-B
12 Automatic back to
the base floor 52
Double outside
-call in the same
floor
13 Parallel Operation 53
force
slowdown
monitoring
function
14 Group control Configure 54 Call adhesion
- 7 -
adjustment
operation
MCTC-GCB-A judgment
15
self-learning the
parameters of
electric machine
Without hang the
load
(Permanent
Magnet
Synchronous
Machine i
distinguish
Encoder angle
55 Weight signal
compensation
16 Well parameters
of self-tuning 56 Leveling
fine-tuning
17 Staircase lock
function 57 Next landing
18 Full load by pass 58 Failure record
19
lighting 、fan
energy-saving
function
59 Short-circuit test
against the earth
20 Floor service set 60 Overload
Protection
21
Car location
automatically
correct
61 light curtain
protection
22 Cancel the wrong
direction 62
Safety measures
of door lockup
outside door area
23 Reverse cancelling 63
Protection
against reverse
travel
24
Floor service set
for front door and
back door
64 anti-slip
protection
25 Open the door
ahead of schedule
Configure
MCTC-SCB-A 65
Trigger point
detection
protection of
trigger
26 Repetition of door
closing 66
Motor
over-current
protection
27 Open the door
outside this hall 67
Power source
over-voltage
protection
28 Closing button for 68 Motor overload
- 8 -
door-closing in
advance
protection
29
Choice of open
and close the door
control protection
69 Encoder fault
protection
30
Category setting
for the time of
keeping door open
70
Well parameters
of self-tuning
failure
diagnostics
31 Keep the door
function 71
Driver module
overheating
protection
32 Outside-call
display by bit 72
Door open and
close fault
protection
33
Rolling show the
direction of
running
Configure
MCTC-HCB-H 73
protection of
door-lock
disconnect when
running
34 Dot matrix display
lift status
Configure
MCTC-HCB-H 74 limit switch
protection
35 Show jumping
floor
Configure
MCTC-HCB-H 75 Over-speed
protection
36 Anti-nuisance
function
Configure ca
weighing
equipment
76
leveling switch
fault protection
37 All selective 77 CPU fault
protection
38 Up selective 78
Output contactor
abnormal
detection
39 Down selective 79
Protection
against false door
locking
40 Separate wait
Optional function
1 IC card user
management 7
toggle group
control lift
Service floor
- 9 -
2 Quarter
monitoring
Configure
MCTC-BMB-A8 nudging
3 Motor temperature
protection 9 VIP Level Service
4 voice
announcement 10
Handicapped
operation panel
operate
5 Earthquake
function 11
Back door
operation panel
operate
6
front and back
door independent
control