Silicon Alloy Wholesale

Coil Sheet Laser Cutting Machine

• Min. Order:  

  3000 Set

• Price:  

  US$ 4000 ~ 60000

• Place of origin:  

  China

silicon steel, aluminum alloy, titanium alloy, galvanized steel, galvanized steel, copper, etc. Decoiler,hydraulic lifting, all servo support, and remote control. Levelling, which is to straighten from coil sheet. Manufacturing steps: Fiber Laser cutting or Punching Or shearing or folding. Post-processing, such as robot handling to stack automatically or welding etc. Coil Fed Laser Cutting Machin

[Related Keywords : coil fed laser cutting]

Fine Cutter Rough Cutter for Polishing

• Place of origin:  

  China

• Price Condition:  

  FOB

silicon-aluminum. Can arrive light-clean and brightness once, also wipe off bug in process. PDC, PCBN groove tool All kinds Groove tool main apply to kinds of axis and piston. PCD, PCBN excircle turningtool All kinds Widely use to machine, electric machine, superhard precision process and so on, especially car fittings, like engine, electric machine, gear case, bend-axis, piston, brake and so on.

[Related Keywords : cutter, polishing cutter, polishing tool, rotogravure cylinder]

PCD Grooving Tool for Pistons

• Min. Order:  

  2 Piece

• Price:  

  US$ 4

• Place of origin:  

  China

• Supply Ability:  

  10000pcs/per week

Pistons are made from aluminium with high silicon content, resulting in a very abrasive material. High-silicon aluminum alloy has higher hardness and wear resistance than other aluminum alloys. When cutting, the cutting tool alternately cuts soft aluminum-based and hard silicon particles, the carbide insert are easy to wear and also easily produce BUE, which will affect the roughness and process

[Related Keywords : Grooving tool Piston]

Mono Crystal Diamond MCD Single Crystlline Diamond

• Min. Order:  

  10 Piece

• Price:  

  US$ 15

• Place of origin:  

  China

• Price Condition:  

  EXW

• Supply Ability:  

  10000

high-silicon aluminum alloy cylinder block and cylinder head) MCD PCD crystal orientation regular irregular knoop hardness(GPa) 104 GPa 50GPa Surface roughness(Ra) ＞0.03μm ＞0.3μm tool life MCD is 17 times longer than PCD up to 5mm in length, and 2.0 mm in thickness 3.0 x 3.0 x 1.0 mm 3.5 x 3.5 x 1.0 mm 4.0 x 4.0 x 1.0 mm 5.0 x 5.0 x 1.0 mm 6.0 x 6.0 x 1.0 mm

[Related Keywords : Mono Crystal Diamond, Single Crystlline Diamond, MCD Diamond, Cutting Tool]

Sic/ZRO2/Al2O3/Fused ZRO2-Al2O3 Ceramic Foam Filter Used in Casting and Foundry

• Min. Order:  

  500pcs

• Place of origin:  

  China

• Supply Ability:  

  120000/month

alloid structure 9.Improve machine function 10.Predigest moulding system CFS (Silicon Carbide Ceramic foam filter) Bore Density (PPI) 8----20 Porosity (%) 80---90 Max. Factory Tem. (=c) 1450 Bending Strength (Mpa)(Normal Tem.) 0.8 Compression Strengh(Mpa)( Normal Tem.) 0.9 Thermal Shock Resistance(time/1100=c) 6 Suitable for Iron We are changeable according to our clients? order?s request CFZA (F

[Related Keywords : ceramic foam filter, ceramic filter, filter, casting filter]

Pit Vacuum Annealing Furnace

• Min. Order:  

  1 Piece

• Price:  

  CNY 128000

• Place of origin:  

  China

• Price Condition:  

  EXW ShangHai

• Supply Ability:  

  60 / piece per Month

Pit vacuum annealing furnace mainly for various mechanical parts for vacuum annealing, stress relieving is widely used in a variety of metals, alloys, crystal materials, bright annealing, vacuum degassing and so on. Different configurations, can pass into the protective atmosphere for nitriding, carburizing heat treatment. Pit vacuum annealing furnace products using pre-vacuum atmosphere protect

[Related Keywords : Furnace, Vacuum Furnace, Annealing Furnace, Pit Furnace]

Full Function Coil Processing Line

• Place of origin:  

  China

High-tensile steel is alloyed with other metals–chromium, molybdenum, manganese, nickel, silicon, and vanadium–to create products with a high yield and outstanding tension resistance and fatigue strength. So it means that the full function coil processing line is higher requirements than any other machines. SunRui can help you to build a new and high performance metal sheet stamping line for

[Related Keywords : coil processing line]

Flap Disc

6．Flap Discs The main abrasive coatings : Aluminium oxide, Silicon carbide. Sizes : Dia100mm,115mm,125mm,150mm,180mm. Availability of Grits: 36 to 400 in Aluminium oxide, Silicon carbide Grits up to 120mm in Zirconia Flap Disc Uses: Products for removing weld trimmings, for use on normal and alloy steels, non-ferrous metals and their alloys, aluminium Flap discs are designed for use on por

[Related Keywords : Flap Disc]