EC21 Product Catalogs - inserted

Plug Insert (RPE033.001)

20131112

Italy Insert 2X4.0poles, Partly insulated without earth Pin-Spacing: 19 ± 0.2 Material(Plastic): PBT or Nylon +30%GF, Non-flammable, Black or White Standard: CEI. 23-50

Zirconia Ceramic Sleeve - SC/LC Standard Series for Fiber Optic Connector

20260505

insertion loss (≤0.2dB), and long‑term reliability. Manufactured from yttria‑stabilized zirconia (ZrO₂), these sleeves offer excellent wear resistance, dimensional stability, and corrosion re

400G DR4 QSFP-DD 500m Module

20250401

insertion loss · Maximum power consumption 12W · Case operating temperature 0°C to 70°C · Two wire serial Interface with digital diagnostic monitoring · Complies with EU Directive 2011/65/EU

650nm Fiber Optic Module

20250331

insert it into Versatile or Bare type port. Features - Specified with 1mm POF (Plastic Optical Fiber) - Data transmission rate up to 155Mbps - Connection Port: Versatile, Bare, ST, SC, FC, SMA - Indu

Military Tactical Field Armoured Patch Cord LC SC ST FC MPO SM MM OM1/OM2/OM3/OM4 Black TPU GoodFtth

20250328

Insertion Loss High Return Loss High Reliability and Stability 3.0mm,5.0mm,6.0mm.10.0mm diameter cable available Specification: Connector Type Performance Data Connector Polishing Mode IL(dB) RL(dB)

980/1064/1030/1550/1550 Optical PM Fiber Filter WDM/CWDM/DWDM with High Extinction Ratio

20250319

Insertion Loss Pass Port dB ≤1.0 ≤0.8 ≤0.8 ≤0.8 Reflect Port dB ≤0.6 ≤0.6 ≤0.6 ≤0.6 Isolation Pass Channel dB ≥25 ≥25 ≥25 ≥25 Reflection Channel dB ≥12 ≥12 ≥12 ≥12 Ext

MPO Patch Cord

20241230

to limit the relative position of the connector, that is, P1, P2, etc. There is a mark called a "white dot" on the side of the connector body to specify the insertion side of the connector.

1310/1550/1064/980nm Polarization Maintaining Fiber Optical Depolarizer

20241111

Specifications Parameter Unit Value Connector Type - FC, SC,LC,ST,etc Wavelength nm 1310,1550 980,1064 850 Insertion Loss dB ≤0.3 ≤0.3 ≤0.5 Return Loss UPC Type - ≥50 APC type - ≥60 Exti

10/100M Fast Ethernet Media Converter Dual Fiber SM 20km SC

20241023

inserted into 14 slots rack mount chassis that allows all the media converters to be powered by a single internal power supply. Key Features 1. Plug and play, high performance, Low power consumption

Mray 10/100M Fast Ethernet Media Converter Dual Fiber SM 20km SC External Power Adapter

20241014

inserted into 14-slot Media Converter Rack Mount Chassis that allows all the media converters to be powered by a single internal power supply. Key Features 1. Plug and play, high performance, Low po

Mechnical Optical Switch 1*4

20241009

Mechanical optical switches including relay and motor optical switches, they are low insertion loss, high isolation, and uninfluenced by polarization and wavelength, the switching time unit is in the

Direct Sales ADSS/OPGW Cable Overhead Line Fittings Dead End Clamp Fittings Dead End Clamp

20240911

OPGW optical cable with pre-stranded tension clampMake up Inner pre-strand, outer pre-strand, U-shaped hanging ring, extension ring, insert ring, ground wire, etc Use Under full tension, the OPGW cab

Patch Cords Optical Specifications Connector Dual-end Mini IP SC Female Connectors 1F Polish

20240905

It’s a kind of FTTH patch cord assembly with Double sheath 5.0mm FTTH Drop Cable.It adopts lower insertion loss SC technologies, and compact cable structure, achieving fast deployment, high relia

800G QSFPDD Direct Attach Cable (DAC)

20240725

Insertion 40NMax.(55N) Per OSFP _Specification_Rev5_0 5.0Module to be inserted into connector and cage with latch mechanism engaged. (55N if the cage has riding heat sink) Cable plug Extraction 30NMa

MEMS Optical Switch 1XN

20240412

Insertion Loss & Low PDL ●Low Power Consumption ●High switching speed ●Insensitive to Shock and Vibration ●High Reliability and Stability 2. Application ●Fiber communication System ●Opti

Hardened Layer 3 Managed Rack 10G Network Switch

20240410

inserted or not detected by device ALM(Fault status indicator), Red Color On: Fault alarm Off: Device on normal working state Ethernet Port 1. Green Indicator On: port link up Off: port link down Bli

MPO/MTP Fiber Cable|MPO-SC Fiber Optical Branch Patch Cord 12 Cores 0.9mm SM MM

20231026

Insertion Loss Standard ≤0.70dB ≤0.50dB Elite Low Loss ≤0.35dB ≤0.30dB Return Loss PC≥50dB, APC≥60dB ≥30dB Durability(500 Matings) ≤0.2dB Test Wavelength 1310/1550nm 850/1300nm Connec

Double Serial Device RS232 RS485 RS422 Ethernet Server Modbus Multi-host Polling

20240202

Introduce (insert product title here) GP-C6001 serial device server provides a serial to network function that converts RS-232/485/422 serial ports into TCP/IP network interfaces, enabling transparen

8/6mm Microduct Coupler Air Push in Transparent Fittings for Sale Microduct Lock Clips

20230821

Insert end face Computer (UPC) shape round production process Molding application Fiber optic distribution frames, network equipment, fiber optic modules light source laser Connector Type SC-APC bran

FTTH 60mm Fiber Fusion Heat Shrink Protection Sleeves

20210507

insert for sealing. This fiber optic splice protector sleeve provides mechanical reinforcement at the joint point and maintains the optic transmission properties of the fiber optic cable. Features:

5G Fronthaul Semi-Active WDM System

20211015

insertion loss (dB) (Without protection) A ≤3.0 ≤4.0 ≤4.4 ≤3.0 ≤4.0 Center wavelength deviation (nm) ±1.5 ±1.0 1dB channel bandwidth (nm) ≥13 ≥5 The flatness of passband (dB) ≤0.5 I

Automotive Connectors

20230506

inserted into the PCB and locked into place, soldering mistakes become obsolete. Greenconn's press fit connectors are easy to remove, replace and provide high electrical reliability. Why Choose Green

0.15dB SM/MM 250/900um Optical Fiber Mechanical Splice

20220902

Insertion Loss of 0.15 dB Precise metal alloy components coaxial autocollimator on the core, durable connection Low thermal expansion/contraction coefficient core material , strong environmental adap

Sintai DCM Dispersion Compensation Module and PLC FBT Optical Splitter for WDM System

20210809

insertion loss Low polarization mode dispersion Wide band Dispersion Compensation for DWDM System Packaging and interface types can be customized Comply with Telcordia GR-2854-CORE standard Conform t

Fiber Optic Termination Box 2 Core

20181005

Technical Data Working temperature -40℃ to +75℃ Insertion loss ≤0.2dB Relative humidity ≤85%(+30℃) UPC return loss ≥50dB Atmospheric pressure 70KPA to 106KPA APC return loss ≥60dB

Fiber Optic Waterproof Cable Pigtail

20131205

insertion loss, high return loss General use waterproof, adapt for outdoor hard environment Easy to install, high reliability FC SC ST LC MU connectors are available 2, 4, 6, 8 and 12 cores are avail

MTP/MPO Connectors

20230411

inserted together, a certain external force will not change the physical contact between the two end faces, and the optical performance will not deteriorate as much as possible. Welink, as an excelle

Simplex Single Mode Optical Fiber Cable OS2 LC APC To LC APC Fiber Optic Patch Cord

20231225

insertion loss, high return loss● Excellent mechanical endurance● High credibility and stability● Good in repeatability and exchangeability● 100% Insertion, Return Loss, End Face and Interfer

ST Fiber Optic Patch Cord

20140220

Datolink Ltd make high quality fiber optic patch cord, which provides low insertion loss, high return loss, low polarization effects which can provides excellent environmental stability for PM amplif

2W 1064nm Isolator

20230203

Insertion Loss at 23℃ dB 0.4 0.5 0.5 0.6 Max. Insertion Loss at 23℃ dB 0.55 0.65 0.65 0.8 Min. Extinction Ratio at 23℃(only for Both Axis Working) dB 20 18 20 18 Min. Extinction Ratio at 23℃(

PDLC IP67 Fiber Optic Connector Plug and Socket for FTTA

20140831

Insertion Loss(dB) < 0.3dB (@1310nm& 1550nm) Receptivity(dB) ; 0.2dB Exchangeability(dB) ≤ 0.2dB Working Temp. -40c~+85c Waterproof IP 67 Other Information IP67 Optic Fiber Plug and Socket a

Outdoor Wall Mount Fiber Optic Splitter Box with Cold Rolled Steel Material

20231116

insertion loss: ≤0.2dB added losses: ≤0.2dB v return loss: ≥45dB added losses: ≤0.5dB Application: v Telecommunications subscriber loop v LAN/WAN v CATV Model Fiber Quantity Splice tray Dimen

FE1 Fiber Optic Modem

20120601

insertion and alarm, which simplifies the circuit. Thereby the reliability of the machine is improved. Special Features 􀁹 Jitter tolerance and jitter transmission characteristic of E1 channel have

GEZHI 1x8T Passive Optical Switch with FC/APC Connector

20230330

insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Transmitter and Receiver Protection,Protection, Optical Network,Network Test Syste

Network Crimping Tool

20140321

stripper,cable knife,hand crimping tools,network tools,coaxial cable stripper,pipe cutter,fastening tools for cable tie,tool sets,combination tools,insert tools,automatic cable stripper

PLC Splitter PLC-1x32-N

20150717

Insertion loss Low PDL Compact Design Good channel-to-channel uniformity Wide Operating Wavelength: From 1260nm to 1650nm Wide Operating Temperature: From -40℃ to 85℃ High Reliability and Stabili

Planar Lightwave Circuit Splitter Module

20150202

Product Description Planar Lightwave Circuit Splitter Module PLC Splitter Feature 1.Low insertion loss and low PDL 2.High channel counts 3.Exceptional reliability and stability 4.Wide Operating

Ftth Cable P Clamp So-Type

20231029

insertion and secure retention. These clamps are engineered to prevent excessive bending, stress, or damage to the optical fiber cables, which is crucial for maintaining the signal quality and long-t

Singlemode Simplex SC/PC-E2000/PC Fiber Optic Patch Cord

20160909

Product details APPLICATIONS： 1.Telecommunications 2.LAN 3.FTTH 4.Optic fiber sensors 5.Testing instruments FEATURES： 1.Low Insertion tolerance 2.Easy to handle 3.Stable environment SPECI

20MHz ~ 1000MHz Coupler

20210624

Insertion loss：≤0.4dB； 6) Flatness：≤±1dB； 7) Directivity：≥20dB； 8) Max. power handling：≤1200W（CW）。 2.3 Input / Output Interface 1) RF interface a) RF input / output co

OFI-400 Optical Live Fiber Identifier

20230706

insertion loss induced by the macro-bend is too small to affect the signal on the fiber and the integrity of the fiber is unaffected by the measurement process. NOYES OFI-400C instruments are designe

LC To SC Single-mode Simplex 2.0mm 3.0mm Fiber Optic Patch Cord

20211230

Insertion loss 2).High return loss 3).Good Repeatability 4).Good Interchange 5).Excellent Environmental Adaptability 3.Application 1).Communication rooms 2).FTTH (Fiber to The Home) 3).LAN (Local Are

Siewindos Signal CATV Networking Communicaiton FTTH Fiber Optic drop cable Patch cord

20190310

inserting distributor or fixed coupler. Frequency rang forward: 47/87-862 MHz Frequency range return: 5-30/65 MHz Gain forward path: 34 ± 1.0 dB Gain return path: 20 ± 1.0 dB Frequency response: ±

0.8 To 5.0 Ghz Drop in Isolator

20200314

Drop in Isolator *Frequency range 10MHz to 26.5GHz,up to 2000W power. *Military, space and commercial applications. *Low insertion loss, high isolation, high power handling. *Custom design available

OFI-02 Fiber Identifier , Live Fiber Detector

20221019

Insertion Loss 1.0 dB Fiber Type <3mm fiber Identified Signal Type 270Hz/1KHz/2KHz Display Type LED Detector Type 1mm InGaAs Minimum detection power -35dBm (1550nm) -30dBm (1310nm) Center

MxN PLC Splitter Module Bare

20181015

insertion loss and Low PDL Uniform power splitting High reliability Excellent environmental stability Compact size and various packages Applications FTTx Systems Digital Hybrid and AM-Video sy

3 Channel FWDM T 1550nm R 1310nm/1490nm Fiber Optical Filter for CATV OUN

20190822

insertion loss (dB)<0.8Reflection insertion loss (dB)<0.6Pass channel isolation (dB)>30Reflection isolation (dB)>15Channel flatness (dB)<0.3Directivity (dB)>55Return loss (dB)>50PDL (dB)<0.1Wavelengt

QSFP28 100G To 4*25G SFP28 Copper Twinax Cable XM DAC

20220223

insertion loss and low cross talk. Designed for applications in the data center, networking, and telecommunications markets that require a high-speed, reliable cable assembly, this next-generation pr

18CH CWDM Mux Demux

20210603

Insertion Loss High Isolation High Reliability and Stability Low PDL Compact Design Good channel-to-channel uniformity Wide Operating Wavelength: 1270nm-1610nm (1261nm~1611nm) Operating Temperature:

Hermetic Sealing Fiber Array

20220120

MEISU's hermetic fiber optic feedthrough is realized by gold-coating the fiber cladding before inserting them into a metal (KOVAR) tube. Gap between fibers and tube is fully filled with sodering tin.