EC21 Product Catalogs - note the

Custom Ceramic Structural Parts Open/Closed Sleeve, Honeycomb, Step Type OEM Non-standard Sizes

20260429

Note: Other non-standard sizes (OD, length, slot width) are available upon request. Please contact us with your drawings. Product Structure The split ceramic sleeve is a precision cylindrical compone

Durable and Reliable Cable Accessories Dead Angle Clamp ADSS Optical Cable Tension Clamp

20240911

Note: The denominator and numerical significance of the models in the table A-ADSS optical cable, NZ - tension clamp, 100-100 meter span, suffix number - applicable cable diameter The company's produ

800G QSFPDD Direct Attach Cable (DAC)

20240725

the connector use protective sleeve protection, each into a separate anti-static bag. Ordering Information Part Number Data Rate Length Wire Gauge Temp. Range Note 800G 0.5M 30AWG 0-70°C 800G 1M 28A

Sintai DCM Dispersion Compensation Module and PLC FBT Optical Splitter for WDM System

20210809

Note: the above specifications do not include loss of optical fiber connectors. The test temperature is room temperature. FBT Optical Splitter The FBT optical splitter launched by Guangzhou Sintai Co

Copper SFP Fiber Transceiver Finisar FCLF8521P2BTL 10/100/1000BASE-T

20231115

the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. The transceiver is RoHS compliant and per Directive 2011/65/EU3 and Finisar Application Note AN-2038. The 1000BASE-T phys

Simplex Single Mode Optical Fiber Cable OS2 LC APC To LC APC Fiber Optic Patch Cord

20231225

the ends, with the SC, ST, FC, LC. Patch cables are used for connections to CATV (Cable Television),telecommunication networks, computer fiber networks and fiber test equipment. The 9/125μm OS2 sing

Cisco Compatible QSFP DD DR4 400Gbps 500m MPO MTP SMF Optical Transceiver

20231218

noted that the operation in excess of any individual absolute maximum ratings might cause permanent damage to this module.ParameterSymbolMinTypMaxUnitPower Supply VoltageVcc-0.5 3.6VStorage Temperatu

10/100/1000M Single Mode Single Fiber Media Converter

20230616

10/100/1000M Single Mode Single Fiber Media Converter The non-managed media converters, which give you economic solutions for media conversion between fiber and copper Ethernet. It provides you SC co

High-Capacity 19inch Optical Distribution Frame Fiber Optic Network Cabinet

20240102

the optic fiber8. Applicable to strap-shaped and non-strap shaped fibers Specifications: Model Fiber Quantity Dimension(cm) Weight(Kg) ODF-OC288288143*75*3050Note: The weight doesn' t contain the spl

QSFP-DD 400G SR8 100m MPO-16 Transceiver

20220523

Notes of 400g sr8: 1. Non-condensing. Recommended Operating Conditions Notes of 400g sr8 transceiver: 1. Bit-Error-Rate (BER) is tested with the PRBS 31Q pattern. 2. 400G QSFP-DD SR8 requires an elec

CATV Mini Optic Node for FTTH

20141226

the ONU. 3.WS-OR20/OR20M/OR20C-WF:built-in 1310/1490nm filter,suitable for single fiber three wave system,RFTV wavelength 1550nm IV. Structure Note: 1. Only WD series FTTH optical receiver has this o

ADSS Optical Cable

20120508

the environment at electric ≤ 25KV/m. Application: New and old electric power line, to be equipped at the same tower. Large-span situation. Strong electric field, much thunder field. Note: We can

EMI Test Receiver

20230907

the ease of performance degradation due to electromagnetic energy. Noted: According to latest CISPR15:2018 standard, you need to use CDNE-M316 (Coupling/Decoupling Network for Emission) to instead t

980nm 100mW 400mW 700mW Pump Butterfly 14 PIN Laser Diodes

20201117

Product Description 980nm 400mW Pump Butterfly 14 PIN Laser Diodes 980nm pump module utilizes a planar construction with chip on subcarrier. The high power chip is hermetically sealed in a epoxy-free

Optical Plc Splitter Cassette

20181015

the following form specifications, the Insertion Loss need to add additional loss 0.25 dB * Notes: P: Premium; S: Standard ; N: Normal 1×N PLC Splitter Type 1X2 1X4 1X8 1X16 1X32 1X64 Fiber T

1x8 Mems Optical Switch Module with High Speed and Fast Switching Time 5v Single Mode Fiber Optic Sw

20190823

Note: 1 Within operating temperature and SOP. 2 Excluding connectors.>> For More Specifics & OEM Please Click Here<< ⊕Dimension ⊕Pin Configuration PinSignal NameDescriptionI/OspecificationsUnit1

1000BaseT and 10/100/1000BaseT/TX Copper SFP Modules 065-791000TMG

20150423

Note: 10/100/1000BaseT/TX operation requires an SGMII interface with no clocks in the host system. With a SERDES interface that does not support SGMII, the module will operate at 1000BaseT only.

High Extinction Polarization Cube BeamSplitter

20210902

the hypotenuse of one of prisms. We mainly offers following Polarization Beamsplitter products :·Polarization Cube BeamSplitter·High Extinction Polarization Cube BeamSplitter Polarization Cube Beam