EC21 Product Catalogs - for transformer

Product Description Insulation Pressboard Presspaper Insulated Paper for Transformer Insulation Gra

20240605

for applications as magnet wire insulation, as layer insulation, in current transformers, in RIP bushings or as shielding material. insulation transformer material insulation crepe kraft paper S.N.IT

Nsulation Paper Nomex Aramid Paper 6640 NMN for Transformer

20220608

Product specifications specification Composite form Insulation class thickness Standard width NMN NOMEX-Polyester-NOMEX F~C 0.14-0.63mm 914mm NM NOMEX- Polyester film F~C 0.08-0.40mm 914mm NMN combin

Non-Shrinking FEP Tubing for Electrical Cable Insulation - Chemical Resistant

20260316

transformers and special sensors, etc. Key features and benefits 1.Working temperature: -55℃ to 200℃ 2.Final contraction temperature: 260℃ 3.Flame retardant rating: VW-1 4.Chemical resistance:

Double Sided Glass Cloth Tape

20250313

in demanding coating and masking applications. Used for metallizing and plasma spray masking, it can also be used to hold components on circuit boards, and an inner wrap for coils and transformers.

Glass Cloth Tape

20250310

for components on circuit boards. - Inner wrap for coil, transformer and others. Items Method Normal Minimum Adhesive Type Silicone Silicone Substrate Firberglass Cloth Substrate Thickness (mil/mm) A

280 Celsius Hard Laminated Cushion

20250306

for high - temperature environments. The high - temperature - resistant lamination pad material can continuously work in a high - temperature environment of 280°C. The lamination cushion has good he

Paper Phenolic Laminates

20241008

for a wide range of industrial applications. They are ideal for electrical components, transformers, and switchgear, ensuring safety and reliability.**High Temperature Resistance:** These sheets can

Loctite 315

20240729

transformers, transistors and other heat generating electronic components to printed circuit board assemblies or heat sinks. In high pot applications this product should be limited to a maximum of 50

Polyimide Film Tape with Adhesive

20240713

cable wrapping, transformers and composite materials manufacturing, and can also be used in packaging, FRP, clothing lining collar and other occasions. Nominal thickness:<6um~350um Width:1um~1.38um

Hot Melt Aluminum Foil Mylar Tape

20230217

transformer manufacturer. 4. It is divided into double-sided conduction and single-sided conduction. There are 51mm and 76mm (paper tube or rubber tube) for selection. There are natural colors (silve

10X85mm HRC Cartridge Fuse 1500V DC 30A Link Fusible for Solar PV System Photovoltaic

20231114

for power transformer protection The company's main products are high-voltage current-limiting fuses with voltage grades ranging from 3.6 kv to 40.5 kv. Products, divided into transformer, motor

P233A Meta-aramid Insulation Paper

20191025

transformer coil end filler, where high bulk and conformability are of prime importance. LONGPONT® P233 offers increased impregnability and saturability when compared to LONGPONT® L233, making it s

Glass Cloth Tape

20220513

for a long time; High mechanical strength, suitable for tight and tight coil wrapping; Product application: Insulation and strapping of transformers (especially high-frequency transformers, microwave

Silicone Self-Amagamation Tape

20230228

HB1 521 SILICONE SELF-AMALGAMATION TAPE Applications: To provide high temperature insulating protection for large electrical equipment like F Class motor and transformer. Also can be used in power c

Outdoor Epoxy Resin Post Insulators Up To 24kV

20131105

Shuguang Electric is set up to manufacture every particular customer requirements & following are our some product range of epoxy moulded components. 01. Monoblock for Transformer 02. Epoxy bus bar s

36-765kv Oil-immersed Current Transformers

20180622

transformer, Oil CT Oil-immersed inverted tank current transformers is applied for metering and protect in 36~765kV High-voltage power transmission system. ——The features of the equipme

Class F DMD Prepreg

20230424

for interlayer insulation and end insulation of low voltage coils of Class F dry-type transformers, and can also be used for slot insulation and turn-to-turn insulation of Class F motors. In addition

Silicone Adhesive Polyimide Tape (J-630)

20150914

for motor insulation, transformer loop packing, motor loop fixation and external insulation. Product No. Adhesive Type Thickness mm Adhesion N/25mm Tensile Strength Elongation at Break Temperature R

Polyimide Tape ( Kapton Tape)

20160826

for the high temperature application of PCB plating, Transformer, coil and capacitors. Backing Film Thickness: 25microns Adhesive Thickness: 35microns Total Thickness:60microns Adhesive to steel

Non-alkal Fiberglass Binding Tape

20190102

Application: This product has good thermal resistance, excellent insulating, corrosion resistance. It can be used for wrapping and banding material for transformers, electric motors and cables

Laminated Compressed Wood Used for Electrical Insulation,Electrical Laminated Compressed Wood.

20220126

...kindinsulation com Made of Maple birch,ribbed birch. Thickness:10mm-120mm Width:1500*2000mm,1200*2400mm,1500*3000mm. Widely used for insulation parts of the oill immersion transformer and inductor