EC21 Product Catalogs - dielectricity

Single-wall Heat Shrink Tubing 2:1 Shrink Ratio and A Temperature Resistance of 135 Degrees Celsius

20260423

Dielectric voltage withstand 2500 V, 60 sec no breakdown UL224 Breakdown strength (choose one of withstand voltage) ≥15kV/mm ASTM D 149 Volume resistivity 1014Ω·cm min. IEC 60093 SIZE Product Spe

Thermally Conductive Pad (SSTCP)/ Non-Silicone Thermal Pad

20250625

Dielectric breakdown voltageKV/mmVolume ResistivityΩ.cmHardnessShore 00UL flammability classUL 94SSTCP-015A-VH 3.901.5-40~+150<210840~60V-0SSTCP-015A-VH14.161.5-40~+150<210840~60V-0SSTCP-015A-VH24.2

Laird Tgard 200B

20250311

FEATURES & BENEFITS1. High thermal conductivity of 5.0 W/m·K 2.High dielectric breakdown voltage 6,000 volts 3.Resistant to tears and punctures4.UL94 V0 rated Laird Tgard 200B series present high-pe

Acetate Cloth Tape

20250310

Dielectric Breakdown 2000 volts 2500 volts Insulation Resistance 20000 MW Breaking Strength 35 lb./in. (62 N/10 mm) 40 lb./in (70 N/10 mm) Elongation (% at break): 10 Electrolytic Corrosion Factor 1.

Fish Paper/Presspan Paper

20250308

This product has high mechanical strength and Excellent dielectric property. It can be as slot,interturn and liner insulation material for E- class electric motors and other electric appliances.

Heat-Resistant Polyimide Film (PI Film)

20250306

smoke. 3. No known organic solvents. 4. Tg over 350°C. 5. Usable from -269°C to 400°C. 6. Very good dielectric strength (300KV/mm on a 25µm film base). 7. Very good radiation resistance.

Thermal Management Materials 3.0W Silicone Thermal Gap Pad for Electric Parts Heat Transfer

20241021

Dielectric Breakdown Voltage (T= 1mm above)>5500 VACASTM D149ConstructionCeramic filled silicone elastomer**********Dielectric Constant5.0 MHzASTM D150Thermal Conductivity3.0W/mKASTM D5470Volume Resi

Factory Cheap Thermal Conductive Silicone

20240904

Dielectric Breakdown Vottage KV/mm >6 >6 >6 ASTM D149 Volume Resistivity Ω.cm 9.6x10~13 9.6x10~13 9.6x10~13 ASTM D257 Thermal Expansion ppm/k 152 152 152 ASTM E831 Flame Retardant Grade -- VO VO VO

Thermally Conductive Insulator Silpad BM-K10 Silicone-coated Fiberglass Sheet for Mosfet for IGBT

20240827

dielectric strength, good thermal conductivity performance.It can resist high voltage and metal parts pierced problem lead to a short circuit, it's a good thermal insulation material to replace the

Polyimide Tape

20240813

Silicone Color: Brown Total tape thickness: 0.04mm, 0.06mm, 0.065mm, 0.08mm, 0.1mm, 0.12mm, 0.165mm Dielectric strength: 6KV---12KV Adhesion to steel: 14kg/in Insulation class: 300Degree Celsius

Polyimide Film Tape with Adhesive

20240713

dielectric properties, uniform thickness, and shiny surface. It is used for low-voltage motors, electrical coils, inter-turns, end wrapping insulation, gasket insulation, magnet wire wrapping insulat

Wholesale Electrical Insulation Vulcanized Fiber Sheet High Voltage Red Vulcanzied Fibre Paper

20240709

unique and modern paper-making technology and advanced equipments. High dielectric strength and elasticity, strong oil resistance, wear resistance, corrosion resistance and heat resistance.

High Quality G10 Insulated Material Epoxy Glass Fiber Laminated G10 Sheet

20240605

dielectric constant/≤5.58dielectric loss factor/≤0.049surface resistivityΩ-10volume resistivityMΩ·m-11heat resistance grade/≥5x104High quality insulation FR4 /G10 green epoxy fiberglass cl

Medium and Heavy Duty Heat Shrink Tubing

20240403

Dielectric strength ASTM D2671 ≥15 KV/mm ID=Internal Diameter WT=wall thickness Typical application Ideal for insulating and protecting irregular shaped cables connectors and components. Ordering

P233A Meta-aramid Insulation Paper

20191025

dielectric strength and low dielectric dissipation factor. LONGPONT® P233 is the uncalendered precursor of LONGPONT® L233 .It is available in four thicknesses (0.10 to 0.25mm)(4 to 10 mil),with a d

Bergquist Gap Pad Tgp 7000ulm

20231113

Dielectric Constant, ASTM D150, 1,000Hz 8.7Dielectric Breakdown Voltage : 40 mil sample, VAC >5,000Volume Resistivity, ASTM D257, ohm-meter 1.2×1011 Thermal Properties Thermal Conductivity, ASTM D54

High Performance Yellow Polyimide Gloss Laminated Film for Precision Insulation Protection

20230502

Standard of Performance Thickness 25um Tensile strength(TD) ≥170Mpa Tensile strength(MD)≥165Mpa Elongation≥40 % Young's Modulus≥3.1Gpa Dielectric Constant 3.5±0.4 Dissipation Factor≤0.004

FIberglass Silicone Sleeve

20231229

good qualities of dielectric, high temperature resistance, excellent elasticity. It can be used for wiring insulation and mechanical protection for electrical machinery and electrical appliances.

EPGC201/202/203/204/205/308 Laminated Sheet G11

20230824

dielectric properties - Workable while cold up to 3 mm thick 3. APPLICATIONS. Very convenient for equipment on high frequencies and in general for all elements put under high dynamic stresses with hi

Polyimide Tape ( Kapton Tape)

20160826

Dielectric Breackdown: 6 kV Temperature(Max): 260'C For Use: PCB masking ( Gold Plating,HSAL) Transformer Characteristic: Excellent Heat,Cold,Solvent & Voltage Resistance EXcellent Insulat

Arrester Silicone Rubber

20231127

dielectric strength and low leakage current, ensuring efficient and effective surge protection. Arrester silicone rubber is also highly resistant to abrasion, chemical attack, and mechanical stresses

FR4/G10

20120409

sheets exhibits extremely high mechanical strengths (flexural, impact, and bonding) at room temperature, good dielectric loss and electric strength properties under both dry and humid conditions.

EPR Self-Fusing Tape

20230223

dielectric cable insulation. l Working temperature:-55℃to105℃ Technical properties: Property Testing method Typical data Tensile strength ASTM D 2671 ≥2MPa Elongation at break ASTM D 2671

Diamond Dotted Paper,

20180304

www.kindinsulation.com leading Diamond dotted insulation paper(D.D.P).is made of electrical insulating paper with diamond shape epoxy resin dotted in both sides.This product has good dielectric prope

CPU LED Thermally Conductive Silicone Interface Pad

20220719

Dielectric Constant 1MHz 7.15 ASTM D150 Weight Daminify --- <=0.3% at 150C 240H Flame Rating --- V-0 UL 94 Thermal Conductivity W/m.k 3.0 ASTM E1461 UL, RoHS, REACH --- Compliance --- Sheet sizes: St

PTFE Teflon Tubing

20160812

Dielectric strength ≥26kv/mm IEC 60243 Volume resistivity ≥1014Ω.cm IEC 60093 Copper corrosion pass UL 224 Water absorption ＜0.1% ASTM D 570 Dimension Size (AWG） Inner diameter(mm）

Polyimide Film (1Mil~12Mil )

20160418

dielectric properties, mechanical properties, temperature-resistance, radiation-resistance, temperature range from -269C to +400C. Specifications: 1) Thickness: 0.0125mm ~0.3mm 2) Width: 520mm ~ 6

PET Heat Shrink Tubing

20140605

dielectric capability, flame resistance, low temperature shrinkage etc. It is widely applied in electrical appliances and electronic components, such as motors, sensors, batteries and so on. The ad

PTFE (Teflon) Insulator

20181203

dielectric constant and low dissipation factor. 5. Non-flammability. 6. Non-stick and easy to clean. 7. Long-term weathering. 8. High arc resistance, and high surface and volume resistivity. Cap

Silicone Rubber Defrost Heating Wire Door Heater

20210519

Dielectric Strength 1800V for 2 S Max.Temperature 180°C Length of Heater On your Request Technical data Insulation resistance: after putting the whole tube in water for 24 hours, insulation resista

PI Polyimide Film Kapton

20230419

What we produce: Polyimide film is a kind of special plastic film, flat and smooth, no crease, no particulate air bubble and no pinhole, with excellent mechanical properties, dielectric properties, l