EC21 Product Catalogs - shrink

Single-wall Heat Shrink Tubing 2:1 Shrink Ratio and A Temperature Resistance of 135 Degrees Celsius

20260423

KY-135°C-2X single wall heat shrink tubing KY-135°C-2X 2:1 single-wall polyolefin heat shrink tubing is made of cross-linked high-temperature resistant 135°C soft PE material, featuring excellent

Waterproof Insulation Heat Shrink Shrinkable Sleeve Tube Wrap Rolls Tubing

20240621

Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)Operating Temperature: -55°C to +125°CMinimum Shrinkage Temp: +70°CFull Shrinkage Temp: +110°CMaximum Tensile Strength: 10.4

Braided Heat Shrinkable Sleeve and Non Heat Shrink Self-closing Wrap for Automobile Industry

20240403

BHST Braided Heat Shrinkable Tubing for Automobile Industry Features Polyester and cross-linked polyolefin knit product Operating temperature: -40~125℃ Excellent mechanical and abrasion protection

Thin Wall Polyolefin Halogen Free Flame Retardant Colors Heat Shrink Tubing

20200220

TWRS-125H(2X)(3X) Thin-wall heat shrink tubing/flexible/flame retardant/2:1/3:1 Features: • Crosslinked polyolefin • Halogen free • Shrink ratio: 2:1 3:1 • High flexibility Approvals: • UL2

Polyester Shrinking Tape

20180304

leading Polyester shrinking tape. Polyester shrinking tape is made of a special compound fiber of thermal contraction.after binding and dried at 105℃ for 10 minutes,it will be shrunk to 70%,which i

PET Heat Shrink Tubing

20140605

PET Heat Shrink Tubing Description of PET heat shrink tubing: PET material heat shrink tube has been widely used in many fields with its Characteristics：excellent mechanical properties in a wide

High Temperature Resistant Three-in-One Release Film

20250306

shrink. 4. Low thermal expansion coefficient: It matches the thermal expansion coefficient of the substrate to reduce performance failure caused by deformation at high temperatures. Customization :

External Wall Insulation Phenolic Board

20240929

shrinkage, deformation, or other issues in any environment. After the flame spraying experiment, it was found that the phenolic board surface does not burn, carbonizes at high temperatures, does not

3 To 1 Heat Shrinkable Tubings

20220510

3 to 1 shrink tubing using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansi

Bopi Polyimide Film Used for FPC, Label, Electrical Insulation & Heat Resistance

20230501

Resistivity>10^14 Dielectric Strength≥200 v/um Thermal Expansivity 25±3ppm/℃ Shrinking Percentage ≤0.12% Hydroscopicity ≤2.2% Density 1.44±0.2g/cm³ Wetting Tension 58mN/m

PE Battery Separator

20231016

shrink (<5%) when heated, and Safety is not suitable for high-power, high-capacity batteries; dry method can do three-layer film, the advantage of three-layer film is that the thermal shutdown temper

Non-alkal Fiberglass Binding Tape

20190102

Non-alkal fiberglass tape is made of the non-alkali glass fiber yarns ,the main component is E-glass, oxidation sodium, for which the content of oxidation of alkali metals is no more than 0.5%. Char

Void Filling Mastic

20230228

HB1101 Void Filling Mastic A pplications: To provide void filling and insulation for power cable termination and joints for heat shrink and cold shrink technology up to 15KV. Features: 1.Excellen

PTFE Teflon Tubing

20160812

PTFE Teflon Tubing Description Teflon tubing or PTFE tubing, short for polytetrafluoroethylene tubing, is made of superior polytetrafluoroethylene resin through special extrusion and sintering proces

Anti-static ESD Polyimide Tape for PCB Manufacturing for Huayuan

20240218

shrink,about 70~120rolls/carton(according to different specifications). Port Zhuhai Lead Time : Quantity(Rolls) 1 - 800 >800 Est. Time(days) 10 To be negotiated Anti-static ESD Polyimide Tape for PC