Dispensing System Wholesale

Hypodermic Needle Making Machines

• Place of origin:  

  Korea

Fully automatic needle assembling system. Various sizes of needle can be assembled by adjustment and or replacement of needle inserting jig, etc. The adjustment of dispensing quantity of epoxy bond or U.V. bond in accordance with the required specification is available. Self-checking for defection product Electric Power : 2 Phase x 220V x 50/60Hz, 13Kw Dry Conveyor Motor : DC 1Hp (with speed cont

[Related Keywords : Hypodermic Needle manufacturing machine, needle making machines, needle assembly machine]

TAD-233 Can Pump

• Place of origin:  

  Korea

Crystalline cell module frame sealing TAD-233 CAN PUMP TYPE It is a 2 liquid type automatic discharge equipment for sealant sealing of crystalline solar cell module frame. ▶ It is a suitable system for high viscosity liquid dispensing to integrate can pump with TAD-233 Thin film cell module edge sealing PCP-200-60 BOOSTER PUMP It is a 200ℓ automatic conversion can pump system for seal

[Related Keywords : can pump, high pressure pump, ram pump]

ECOYES-331 (Desk Top Robot/ Step Motor Type)

• Min. Order:  

  1 unit

• Place of origin:  

  Korea

3D interpolation under the conditions of heavy weight, high speed and high accuracy precise motion control at the corner as well ▶ Special dispensing software for sealing, coating and spread of adhesive ▶ Built-in all electrical wirings and pneumatic lines related dispenser and controller ▶ Easy after-service of controller by pull-out and slide-in system. DRAWING

[Related Keywords : desk top robot, step motor type robot, dispensing robot]

Controller

• Place of origin:  

  Korea

dispensing response speed( 50% faster than TAD-200S) Highly accurate dispensing time by 1/1000 second. Compact size Reduced the noise level up to 50% with high-end noise filter. Applied Materials Cream Solder, Silver Paste, Epoxy, Bond, UV Resin, Silicone, Chip Bond, Oil... Specification Control method Electronic / Pneumatic system Dispensing pressure 0~10kg/cm2(S:Standard), 0~4kg/cm2 (L:Option),

[Related Keywords : air pressure, Controller, dispensing system, precision dispensing controller]

Controller

• Place of origin:  

  Korea

dispensation and automatic stop by the interval work. Vacuum control stops liquids from flowing after dispensation finishes.(TAD -200S) Varied output functions facilitate automation and interface. The digital timer displayed on LED in manual mode makes it easy to set time. Memory the values for dispensing until you set the values again. Standard KIT Applied Materials Cream Solder, Silver Paste, E

[Related Keywords : air pressure, Controller, dispensing system, precision dispensing controller]

Cash Dispenser, Bil Dispenser (VCDM)

• Place of origin:  

  Korea

• Price Condition:  

  FCA Seoul

, VCDM is a short edge banknote dispenser which is very compact and efficient in terms of space. Usually, it is perfect to install payment terminal or kiosk system.

[Related Keywords : Banknote Dispenser, Cash, Dispenser, atm]

Pioneer 300 series

Contact Angle 0~180 °, ± 1 ° accuracy Max. Sample size 300 mm Wafer (up to 12 inches wafer available) Zoom 6.4 fold Focus Internal, ±6 (mm) Resolution 768 x 576 NTSC, 16M color Moving type Auto mapping system (X-, Y-, Z- and Rotating) Dispenser type Automatic syringe system Evaluation method Contact angle & Surface energy Operating system Window XP

[Related Keywords : Auto, Contact, Angle, Analyzer]

CTA series

system and the auto mapping dispensing system. That would allow you to analyze and evaluate the surface of any large samples up to 2000 x 2200 mm by just one click. We are certain that the benefits offered by the CTA Contact Angle Analyzer will help your application in QC and R&D. Fully automated image analysis & calculation by computer. Simple and fast operation. Individual measurements on diffe

[Related Keywords : Auto, Contact, Angle, Analyzer]

Auto Contact Angle Analyzer - Phoenix 600

Auto Contact Angle Analyzer Model : Phoenix 600 Feature The Phoenix 600 is a new product and upgraded for accurate and precise measurement by fully automatic operation. The system can offer the flexibility required for scientific research and engineering process development. The Phoenix 600 system controls the fluid dispensing system automatically by embedded a stepping motor system for precis

[Related Keywords : analyzer, Contact, angle, Surface]

Auto Contact Angle Analyzer - Phoenix 300

x H x L) 200 x 50 x 8 (mm) Phoenix300plus : 250 x 200 Contact Angle range 0~180°, ±0.1° accuracy Dispenser type PC controlled automatic syringe system Evaluation method Dynamic/ Static Contact angle Surface energy & surface energy Sessile Drop/ Pendent drop Zoom 6.4 fold Focus Internal, ±6 (mm) Resolution 768 x 576 NTSC, 16M color Operating system Window 98/ Me/ XP

[Related Keywords : analyzer, angle, contact, auto]

Dynamic contact angle analyzer (Alpha 100 Series)

dispensing form a precisely controlled micro pump or manual drop Easily replaceable syringe tips to allow for varied drop size Auto calculation of surface energy & wetting energy Specification Model Alpha 100 Contact angle 0 ~ 180° , ± 0.1° Dispensing type Automatic or Manual system Operating system Windows XP Connecting type USB 2.0 CCD type 1/4" CCD Lens F 2.5, f = 4.9 m

[Related Keywords : analyzer, Contact, angle, Surface]

Distributer Brazing Machine

• Place of origin:  

  Korea

dispensing by rotary dispenser. It will be very helpful to mass production. On the other hand, SK Brazing offers a complete range of brazing and welding and soldering service including materials, automation and technical expertise. From simple shuttle machines to complex, fully automated systems incorporating robotics, material handling, etc.. S K Brazing has designed automation solutions for mo

[Related Keywords : Copper distributer brazing machine, Aluminum header brazing machine, Brazing machine, Brazing equipment]

Desk Top Robot

• Place of origin:  

  Korea

dispensing software for sealing, coating and spread of adhesive ▶ Built-in all electrical wirings and pneumatic lines related dispenser and controller ▶ Easy after-service of controller by pull-out and slide-in system. SPECIFICATION Model (AC servo) 331(R) 441(R) 3351 4461 Range of operation X axis 300mm 400mm 300mm 400mm Y axis 300mm 400mm 500mm 600mm Z axis 100mm 100mm 200mm 200mm R

[Related Keywords : dispensing robot, desk top robot, step motor robot]