EC21 Product Catalogs - pour

Pour Point Depressant

20241026

A general-purpose oil pour point depressant with market competitiveness, which has a good susceptibility to most kinds of base oils, and can meet the requirements of industrial oil and vehicle oil at

Dyna Gear Oil

20250508

Pour Point ℃-22.5-20.0-15.0 Features - GEAR Series are used for sealed gear units operated under extreme conditions and it uses high- viscosity index oil purifying solvent as base oil.- GEAR Serie

L-QB300 S2 Heat Transfer Oil - 55 Gallon Drum - Single Drum

20250408

by KOH) 0.05 mgKOH/g Carbon residue ≤ 0.05 wt% Kinematic viscosity 40℃ 29-37 mm2/s 100℃ 3.4 mm2/s Density (20℃) 845-895 kg/m3 Pour point -28℃ Recommended max. fluid temperature 305℃

Process Oil P-4

20250211

Pour Point (℃) MAX -10.0 MAX –7.5 MAX –7.5 MAX –5.0 MAX –5.0 MAX -2.5 Aniline Point (℃) MIN 65 MIN 70 MIN 75 MIN 80 MIN 85 MIN 90 Evaporation reduction (107℃)/22hr wt% MAX 3.0 MAX 2.5 M

High-temperature Chain Oil Basestock Synthetic Base Oil AN30 Alkylated Naphthalene

20241226

Pour Point,℃ -50 -40 -39 -20 ASTM D97 Acid Number, mgKOH/g 0.01 0.01 0.01 0.01 ASTM D974 Aniline Point, ℃ 32 96 110 125 ASTM D611 Noack Volatility, wt% 18.5 2.2 1.3 <1.0 ASTM D5800 CCS@-30, mP

POE Refrigeration Oil Air Compressor Oil -Refrigeration Oil RL32H RL46H RL68H for Hfc Refrigerant

20240910

POE Refrigeration Compressor OilTypical properties32 46 68 100 Kinematic Viscosity@40°C@100°C325.546.46.963.58.39710.7Viscosity Index10910410192Pour Point °C-54-45-39-33Flash Point °C252251254268

PFPE Base Oil

20240419

Pour point ASTM D97 ℃ -51 -36 -36 -30 Density 0℃ 100℃ g/ml 1.93 1.75 1.94 1.76 1.95 1.77 1.95 1.78 Maximum volatilization ASTM D972 66℃ 121℃ 204℃ % in 22hr 1 3 - 1 2 10 <1 1 <5 - - <1 Oil

Chevron Grease ISO 68 22L/5gallon

20191210

pour point and high viscosity index insures that any oil which does reach the evaporator will drain more rapidly than a naphthenic oil. Reduced sludging and formation of harmful deposits in the high

J0050 EPM Ethylene Propylene Rubber

20221101

shear stability and thermal oxidation stability Good compatibility with all functional additives and pour point depressants Improve the low temperature property of oil Good oil solubility

Best Quality Used Engine Oil

20210123

Pour Point - Max °C ASTM-D97 -7 Viscosity 50 °C Cst ASTM-D445 60 Sulfur Content - Max WT% ASTM-D4294 below 0.5% Water WT % ASTM-D482 3% Appearance - Visual Black Sediment Below 0.5%

Dyna Punch-4300S Oil for Aluminum Fin Press Machine(Heat Exchanger)

20200402

cSt)...1.460...Flash Point(°C)...54...Pour Point(°C)...Below-35.0...Water Content...trace...Aniline Point(°C)...81...Copper Strip Corrosion (100°C,2hr)...1a * Packing Drum ----- 200Liters

Base Oil SN 650,SN 500,SN 150

20170120

Specifications of BASE OIL SN 650 Typical Properties Characteristic Bright Stock Test Method ASTM Kinematic Viscosity 100oC,cSt 13 D-445 VI 85 D-2270 Flash Point, oC 260 D-92 Pour Point, oC -6

Thin Rust Preventive Oils, Anti Rust Oils

20231207

Pour point, ℃ no more than -10 GB/T3535-2006 Kinematic viscosity（40℃）mm2/s 20-40 GB/T265-88 salt spray test（35±2℃） Steel 7d A GB/T10125-1997 Copper7d B Aluminium7d B laminated test （

Wholesale Special Grease Shell Tivela SC320 Gear Oil 20L for Lubrication SMT Industrial Production

20231103

pour point to provide effective lubrication when starting at low temperature. 3. Extremely prominent low friction characteristics can greatly reduce the energy loss caused by the friction of the tran

Gear oils

20051021

Pour Point °C -22.5 -20.0 -15.0 Features GEAR Series are used for sealed gear units operated under extreme conditions and it uses high viscosity index oil purifying solvent as base oil. GEAR S

Base Oil

20220119

at 15°C 875(kg/m³) ASTM-D1298 6 Pour Point °C -3 ASTM-D97 7 FlashPoint °C 193 ASTM-D92 8 Sulfur (%wt) Min 0.5786 ASTM-D4951 9 Color (Max) 1.5 ASTM-D1500 10 Water C ontent (ppm) Max 49 -

PAO 4,PAO 6,PAO8,PAO 10,PAO 40,PAO 100,PAO150,PAO200,EPC100,Base Oil

20230628

Pour Point ℃ -60 ASTM D97 ASTM Color <0.5 ASTM D1500 Acid Number mgKOH/g <0.01 ASTM D974 Water Content ppm 25 ASTM D6304 Noack Volatility Loss wt% 12.1 ASTM D5800 Bromine Index mgBr/100g 1.0 ASTM D

Virgin Base Oil Sn 150 and Sn 500

20200107

D445 10.75 – 11.25 11.06 Viscosity Index - ASTM D2270 95 95 Pour Point OC ASTM D97 -9 -9 Water Content - ASTM D95 0.05 <0.05 Colour - ASTM D1500 1.5 L 1.0 Flash Point, COC OC OC ASTM D92 237 256

Base Oil 100 150 250N

20140213

pour point, high flash point,low noack volatility ,almost free of aromatic and suphur Application fertilizer anti-moisture,plant spray oil,engine oil,hydraulic oil,hot transmission oil,lube oil,plas