Compressed Air Wholesale

Buy Air-Cooled Screw Condensing Units

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

https://www.kendallcool.com/air-cooled-screw-condensing-units/ An air-cooled screw condensing unit is a type of refrigeration system that uses a screw compressor to compress refrigerant and condenser coils to dissipate heat from the refrigerant. It is called "air-cooled" because the condenser coils are cooled by ambient air rather than water. The screw compressor draws in low-pressure refrigerant

[Related Keywords : Air-Cooled Screw]

Sandblasting Room BLASTLINE

• Place of origin:  

  Germany

Parts of the system of the blasting cabin: - the blasting cabin - Workpiece entrance door - Operator door with a panel - lighting - rubber lining - sandblasting pot - Abrasives recovery system - pneumatically operated scraper blades - Abrasive container - Dust filter - Aftercooler - Lines / hoses - Steel construction - Main control panel Further you‘ll need a compressor and a compressed air tan

[Related Keywords : Sandblasting, surface treatment]

Flip Top Cap Assembly/Closing Machine

• Place of origin:  

  China

cap assembly equipment to integrate the flip cap ,butterflies cover into one cap with various sizes. 2. Main technical parameters: 6500-10000 capacity pcs / hour (based on the actual situation of caps) Cap category: Cooking oil Cap, Vinegar Cap, Soy Cap Equipped with the power: 1.5KW +0.5 KW. Compressed air: 0.5m3 / hour-8kg pressure on Outer dimensions: 1600mm × 900mm × 1100mm Weight: 780KG

[Related Keywords : cap assembly machine, cap closing machine, flip top cap machine, cap machine]

Edible/Salad Oil Cap Assembly Machine

• Place of origin:  

  China

combination machine. The machine with frequency control, stable performance, reliable, high degree of automation, it is the ideal plastic cover assembly equipment. Main technical parameters: Capacity :8000-10000pcs/ hour (based on the actual situation of caps) Equipped power: 1.5KW +0.5 KW. Compressed air: 0.5m3 / hour-8kg pressure Outer dimensions: 1800mm × 1800mm × 1100mm Weight: 860KG

[Related Keywords : cap assembly machine, oil cap assembly machine, cap assembling machine]

Metal Can/Tin/Container Labeling Machine

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

200-500 tins / min (different with the size of tins) Suitable for tin size, diameter Φ45-114mm Suitable for tin height (maximum) 270mm Label Size Width 23-254mm Length 117-380mm Labeling glue: Hot melt glue + Cold Glue Power : three-phase 380V (or on request) Electric power 2.62Kw Compressed air 2-4Kg/m2, 10 L/ min Overall dimension 1855mm × 750mm × 1250mm Weight 650Kg

[Related Keywords : metal can labeling machine, metal tin labeling machine, can labeling machine, tin labeling machine]

SF6 Recovery and Gas Refilling Device

• Place of origin:  

  China

• Price Condition:  

  FOB Shengzheng

• Supply Ability:  

  10 sets/month

compressed vessels; the vessel is clean inside without remaining particulates, with rust-proof treated inside and well painted outside; it is equipped with pressure gauge, high pressure monitor and relief valve and liquid level monitor; K. Gas retrieving system It is composed of air compressor, bumper, separator, filter, heat exchanger, safety valve, one-way valve, gas pressure gauge, vacuum ga

[Related Keywords : sf6 gas reclamation, sf6 vacuum evacuating, sf6 gas refilling, sf6 recovery]

Ultrasonic Washer for Fruits and Vegetables

• Place of origin:  

  Korea

compression waves in the water, which tear the liquid apart, leaving behind many millions of ‘microscopic voids or partial vacuum bubbles’ (Cavitation). These bubbles collapse with enormous energy, high temperatures and pressures, but they are so small that they do no more than clean and remove surface dirt and pollutants. This action also penetrates blind holes, cracks, and recesses,

[Related Keywords : ultra sonic, Washer, Fruits, Flip]

Automatic Mold Taping Machine

Compressed Air: 5 Bar (Oil & Moisture free) Dimension -TPM2000: 870mm x 850mm x 2160mm (W x L X H) -ATM1000: 883mm x 865mm x 2160mm (W x L X H) Thickness Measuring Equipment Type CTM-1000 The equipment for the precise thickness measurement of the assembled mold. It is recommended to use for the distance compensation in between the front and back mold at TPM & ATM machine. Mold Diameter Applica

[Related Keywords : Automatic Mold Taping Machine]

Ceramic Honeycomgs

• Min. Order:  

  500pcs

• Place of origin:  

  China

• Supply Ability:  

  120000/month

USED IN catalyst carriers, active catatysis and air flow distributors, heat exchange processor, electro-chemical applications and carrier bodies for biological applications, catalytic converters for purifying vehicle exhaust gas, reducing carbon monoxide, amog. Also used in casting and foundry filtration. Honeycomb ceramics have large m2/m3, low air-flow resistance, it?s bee widely used in 1.the

[Related Keywords : ceramic, honeycombs, ceramic honeycomb, ceramic honeycombs]

Nitrogen Membrane / N2 Membrane / Membrane

• Place of origin:  

  Korea

• Price Condition:  

  FOB

Nitrogen Membrane Module(NC-MS Series) Type NC-MS ... The oxygen gas of the high permeability speed, permeate out first through vent port and the nitrogen gas of the low permeability speed as product gas, come out later through the end of hollow fiber, When the compressed air pass through the membrane. The principle is to make use of the difference of the permeability speed of gas in order to sep

[Related Keywords : Nitrogen Membrane, N2 Membrane, Nitrogen, Membrane]

Nitrogen Membrane / N2 Membrane /Nitrogen Generator

• Place of origin:  

  Korea

Miniature Nitrogen Membrane Module(NC-MF Series) Type NC-MF ... The oxygen gas of the high permeability speed, permeate out first through vent port and the nitrogen gas of the low permeability speed as product gas, come out later through the end of hollow fiber, when the compressed air pass through the membrane. The priniciple is to make use of the difference of the permeability speed of gas in

[Related Keywords : Nitrogen Membrane, N2 Membrane, Membrane, Nitrogen]

Nitrogen Generaotr / N2 Generator

• Place of origin:  

  Korea

NITROCELL (CN-M40 Series) Type CN-M40... N2 generator is adoping of nitrogen membrane and the durability is excellent. Especially this products do not require electricity. Besides this products need to have only compressed air though the compressor or the air pipe line at the various feilds and each site. Purity : 95% ~99.5% Flow : 18 LPM ~ 272 LPM Pressure : 0.5 MPa ~ 0.8 MPa ▶ Improvement of

[Related Keywords : Nitrogen Generator, N2 Generator, N2, Nitrogen]

N2 Generator / Nitrogen Generator

• Min. Order:  

  1 Sets

• Place of origin:  

  Korea

• Price Condition:  

  EXW

• Supply Ability:  

  300 Sets

NITROCELL (CN-PM Series) Type CN-PM 15... N2 generator is adoping of nitrogen membrane and the durability is excellent. Especially this products do not require electricity. Besides this products need to have only compressed air though the compressor or the air pipe line at the various feilds and each site. ▶ Purity : 95% ~99.5% ▶ Flow : 1.5 LPM ~ 32.7 LPM ▶ Pressure : 0.5MPa ~ 0.7MPa ▶ Co

[Related Keywords : Nitrogen Generator, N2 Generator, Nitrogen, N2]

Kneader and Internal Mixer

• Min. Order:  

  1

• Place of origin:  

  China

• Price Condition:  

  FOB

Compressed air 0.8 MPa 0.8 MPa Consumption of air 40m3/h 55m3/h Max.pressure of vapour 0.7MPa 0.7MPa Pressure of outside cooling water 0.4 MPa 0.4 MPa Water consumption 20 m3/h 35 m3/h Power of motor DC 160KW DC 280KW Reducer NGW-MS, hardened tooth surface NGW-MS, hardened tooth surface Overall dimension 6830×1930×3800mm 8000×2600×4600mm Weight ~15000 kg ~ 25000kg Drivin

[Related Keywords : kneader, regenerated rubber machinery, equipment]

Automatic Ice Cream Cone Forming Machine

100mm 2. Highest height: 255mm 3. Angle: 15° -28° Producing Speed: 200pcs/min at its most Raw Materials: paper, combined aluminum foil paper, or dry stencil paper(＜100g/m2) Other accessories: 1. Glue programmed controlling 2.Air compression engine Covering Area: 2m×2m Overall Dimension: 1.8m×2.5m×2.0m Weight: 800kg more or less (Net Weight) with CE Certification

[Related Keywords : er, ve, rf, qw]