<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - direct heating]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/direct-heating--2673/1/direct heating.html]]></link><item>
<title><![CDATA[Air Max AirCurtain]]></title><link><![CDATA[https://gtijames7.en.ec21.com/Air-Max-AirCurtain--12059123_12059124.html]]></link><description><![CDATA[directions when the door is open, blocking the airflow from the outside
and preventing fine dust and harmful bacteria from entering, while reducing heat loss during heating and cooling.
It also block]]></description><pubDate><![CDATA[20250822]]></pubDate></item>
<item>
<title><![CDATA[Plasma Torch Anode]]></title><link><![CDATA[https://reframetals.en.ec21.com/Plasma-Torch-Anode--12016380_12041520.html]]></link><description><![CDATA[In the field of plasma spraying technology, the plasma torch anode is a highly critical component.
Plasma spraying is an advanced technique that involves heating the coating material to a molten or s]]></description><pubDate><![CDATA[20250206]]></pubDate></item>
<item>
<title><![CDATA[Industrial Rotary Drum Drying Equipment for Mineral, Ore, Silica Sand, Industrial Dryer Machine]]></title><link><![CDATA[https://dongdingdryer.en.ec21.com/Industrial-Rotary-Drum-Drying-Equipment--12032926_12032927.html]]></link><description><![CDATA[Rotary drum dryer is the most common and widely used drying equipment. The heat medium directly contacts with the dried material by convection heat transfer. The rotary drum dryer is mainly used for ]]></description><pubDate><![CDATA[20241224]]></pubDate></item>
<item>
<title><![CDATA[VOC Concentrator and Advanced RTO System]]></title><link><![CDATA[https://swmc2986.en.ec21.com/VOC-Concentrator-and-Advanced-RTO--12024038_12024046.html]]></link><description><![CDATA[direction adjustment, minimized installation space provides excellent field
adaptability.
·Ensured system stability against variable VOC gas flow rate and concentration.
·Highly durable, heat resis]]></description><pubDate><![CDATA[20241113]]></pubDate></item>
<item>
<title><![CDATA[Rice Cooker Tubular Heater Winding Machine]]></title><link><![CDATA[https://osneq.en.ec21.com/Rice-Cooker-Tubular-Heater-Winding--12017287_12017288.html]]></link><description><![CDATA[Rice Cooker Tubular Heater Winding Machine
The automatic heating wire winding machine means that the machine can wind the heating wire into a spring shape according to the required coil diameter and ]]></description><pubDate><![CDATA[20241014]]></pubDate></item>
<item>
<title><![CDATA[Liquid Gas Petroleum Cryogenic ERS QCDC Electro Hydraulic Fluid Marine Loading Arm]]></title><link><![CDATA[https://coscolyg.en.ec21.com/Liquid-Gas-Petroleum-Cryogenic-ERS--12009610_12009645.html]]></link><description><![CDATA[heat tracing, PMS etc.
Parts
1 Swivel Joint
Normally each MLA has six swivel joints to
assure different directions of movement.
It’s easy to change seals and lubricate for
them without dismantling.]]></description><pubDate><![CDATA[20241009]]></pubDate></item>
<item>
<title><![CDATA[CNC Mill Automation System, Dual Multi-grip Vises, 56 X 32 Table, Includes Ur10e Cobot]]></title><link><![CDATA[https://machineryconnection1.en.ec21.com/CNC-Mill-Automation-System--11997980_11997984.html]]></link><description><![CDATA[Heating systems.
Brand Name- Electric cargo bike, Electric hybrid bike, Folding electric bicycle, Air conditioner, Industrial Fans, CNC woodworking Machines, Flexo Printing and labeling machine, Buil]]></description><pubDate><![CDATA[20240904]]></pubDate></item>
<item>
<title><![CDATA[Multifunctional Furnace for Vacuum Hot Pressing Sintering]]></title><link><![CDATA[https://haoyuefurnace.en.ec21.com/Multifunctional-Furnace-for-Vacuum-Hot--11953323_11953353.html]]></link><description><![CDATA[Heating Element
Graphite Plate
Max.Temperature
1600℃
Working Temperature
1500℃
Max.Power
30KW
Max.Vacuum
6.7×10-3Pa（6.7×10-5 torr）
Temperature Accuracy
±1℃
Temperature uniformity
±5℃
]]></description><pubDate><![CDATA[20240618]]></pubDate></item>
<item>
<title><![CDATA[CNC Ball Valve Spherical Grinding Machine CMXCNC]]></title><link><![CDATA[https://muyea.en.ec21.com/CNC-Ball-Valve-Spherical-Grinding--9134542_9134714.html]]></link><description><![CDATA[This CNC ball lapping machine by means of the simultaneously rotating of the balls and the grinding plates to lap the ball surface
*By means of machine X direction movement to centralize the ball
*By]]></description><pubDate><![CDATA[20240614]]></pubDate></item>
<item>
<title><![CDATA[Rfn, Bikon, Sitlok, Tollok Locking Device]]></title><link><![CDATA[https://yanyan1818.en.ec21.com/Rfn-Bikon-Sitlok--4848845_9862349.html]]></link><description><![CDATA[heating,cooling or knocking while installation; Releasing and pushing out screws without striking
Random axial position and radial direction for installation
Easy opearation in narrow space
Easy opea]]></description><pubDate><![CDATA[20240517]]></pubDate></item>
<item>
<title><![CDATA[Paper Edge Protector Cutter]]></title><link><![CDATA[https://sanmachinery2021.en.ec21.com/Paper-Edge-Protector-Cutter--11917334_11917335.html]]></link><description><![CDATA[direct sunlight or heat sources. This will prevent rusting, warping, or other damage to the machine.
By following these maintenance tips, you can extend the lifespan of your edge protector cutter and]]></description><pubDate><![CDATA[20240328]]></pubDate></item>
<item>
<title><![CDATA[Flooring Radiant Panel Test Appartus ISO9239]]></title><link><![CDATA[https://kobistq.en.ec21.com/Flooring-Radiant-Panel-Test-Appartus--1_3233177.html]]></link><description><![CDATA[heat is applied by means of a gas-fuelled panel, inclined at 30&amp;deg; and directed at a horizontally mounted floor covering system specimen. The radiant panel generates a radiant energy flux distribut]]></description><pubDate><![CDATA[20081012]]></pubDate></item>
<item>
<title><![CDATA[Second Hand Metal Forming Machine]]></title><link><![CDATA[https://ezhonggroup.en.ec21.com/Second-Hand-Metal-Forming-Machine--11511703_11511746.html]]></link><description><![CDATA[directly observe the working displacement of the upper roller.
- All work rolls are forged from high-quality steel and are heat treated and induction hardened.
- Manufactured in accordance with EC sa]]></description><pubDate><![CDATA[20220117]]></pubDate></item>
<item>
<title><![CDATA[Furnace Auxiliary Equipment]]></title><link><![CDATA[https://chnzb.en.ec21.com/Furnace-Auxiliary-Equipment--11858115_11858121.html]]></link><description><![CDATA[Steelmaking is a continuous process. The meltshop is a hazardous environment, filled with intense heat, suffocating dust, glowing metal, and open flames. Auxiliary machines are equipment or devices t]]></description><pubDate><![CDATA[20231024]]></pubDate></item>
<item>
<title><![CDATA[Open Mill and Refiner  XK550  XK400  XK660 XKJ-480]]></title><link><![CDATA[https://bjod.en.ec21.com/Open-Mill-and-Refiner--2032429_1894669.html]]></link><description><![CDATA[direct connect)
Technology parameter
Mill (XK-250ZG-B)
Pressure and frequency of electricity
380V, 50Hz
Diameter of roll
&amp;Oslash; 250mm
Width of roll
620mm
Rolls heating method - hot water temperatur]]></description><pubDate><![CDATA[20150414]]></pubDate></item>
<item>
<title><![CDATA[HS/LT-006 Heat Transfer PET Film for Litho Offset Printing]]></title><link><![CDATA[https://heattransferfilms.en.ec21.com/HS-LT-006-Heat-Transfer--11584529_11584537.html]]></link><description><![CDATA[HS/LT-006 Heat Transfer PET Film for Litho Offset Printing
Storage environment: Indoor storage to avoid direct sunlight. Room humidity about 30-70%, temperature 5-35°C. The Shelf life is one year.
]]></description><pubDate><![CDATA[20220610]]></pubDate></item>
<item>
<title><![CDATA[PLC Single Effect Falling Film Evaporator 1000-10000l/H Cannabis Oil Distillation Ethanol Recovery]]></title><link><![CDATA[https://evaporat.en.ec21.com/PLC-Single-Effect-Falling-Film--11817058_11817059.html]]></link><description><![CDATA[heating time etc.
Evaporation temperature usually focus on 46-50 degree, especially used for active fermentation liquid, heat sensitive food evaporation, also suit for kinds of water solution low tem]]></description><pubDate><![CDATA[20230708]]></pubDate></item>
<item>
<title><![CDATA[Water Type Mold Temperature Controller]]></title><link><![CDATA[https://rozlzg.en.ec21.com/Water-Type-Mold-Temperature-Controller--4456139_4456171.html]]></link><description><![CDATA[Heating Capacity
KW
3
6
9
6
9
12
Pump
Power
KW
0.37
0.37
0.75
0.75
Max Pressure
Kg/c&amp;atilde;&amp;iexcl;
2.5
2.5
3
4.5
5
5
Max rate of flow
L/min
50
50
50
100
Cooling Way
Indirect Cooling
Direct Cooling]]></description><pubDate><![CDATA[20161031]]></pubDate></item>
<item>
<title><![CDATA[Biomass Power Plant Converting Forest Waste To Energy]]></title><link><![CDATA[https://richi.en.ec21.com/Biomass-Power-Plant-Converting-Forest--11118517_11118522.html]]></link><description><![CDATA[heating value fuel, with a calorific value between 1000- 1200 kcal/Nm3 (kilo calorie per normal cubic metre). Almost 2.5-3.0 Nm3 of gas can be obtained through gasification of about 1 kg of air-dried]]></description><pubDate><![CDATA[20231115]]></pubDate></item>
<item>
<title><![CDATA[industrial Chiller,Cooling Thermsotat / Bath]]></title><link><![CDATA[https://wxpca001.en.ec21.com/industrial-Chiller-Cooling-Thermsotat--5675435_5691821.html]]></link><description><![CDATA[Direct type magnetic pump
Optional: Increase the pipeline magnetic pump pressure in the pipeline
Evaporator
Standard: Braze welding plate heat exchager (BPHE)
Optional: Stainless steel tube heat exch]]></description><pubDate><![CDATA[20180619]]></pubDate></item>
<item>
<title><![CDATA[IR Speed Dome Camera]]></title><link><![CDATA[https://levermtcolourwei.en.ec21.com/IR-Speed-Dome-Camera--6498354_7101233.html]]></link><description><![CDATA[directly set the Add Code &amp; Baud Rate, no need to open the PTZ housing, more convenient. Internal English OSD menu for setting operation, can set the camera, PTZ function. The decoder will auto ident]]></description><pubDate><![CDATA[20120919]]></pubDate></item>
<item>
<title><![CDATA[SP30-SA Clamp Carrier]]></title><link><![CDATA[https://sagamachinery.en.ec21.com/SP30-SA-Clamp-Carrier--5821079_5821885.html]]></link><description><![CDATA[SP30-SA Clamp Carrier combines the high frequency heating with 2 direction press, suitable for finger joint or edge glued board jointing or gluing the rim of solid wood door or other wooden block glu]]></description><pubDate><![CDATA[20200916]]></pubDate></item>
<item>
<title><![CDATA[3000*4000mm Cutting Size 420mpa High Speed High Pressure Glass CNC Water Jet Cutting Machine]]></title><link><![CDATA[https://dergirl.en.ec21.com/3000-4000mm-Cutting-Size-420mpa--7906040_10119997.html]]></link><description><![CDATA[heat press machine, this is widely used in marble mosaic making factory, I don&amp;#39;t know what&amp;#39;s the situation of marble mosaic making in your country, in China , our this system sells good. plea]]></description><pubDate><![CDATA[20170511]]></pubDate></item>
<item>
<title><![CDATA[Butt Weld Fittings]]></title><link><![CDATA[https://sstubecn.en.ec21.com/Butt-Weld-Fittings--10936669_11010721.html]]></link><description><![CDATA[A weldable steel pipe fittings
can change flow direction,branch off, reduce size or connect auxiliary equipment. Butt weld fittings include elbow, tee,reducer,cap and cross.These fittings are the mos]]></description><pubDate><![CDATA[20190920]]></pubDate></item>
<item>
<title><![CDATA[Box Type Annealing Furnace]]></title><link><![CDATA[https://chenchr.en.ec21.com/Box-Type-Annealing-Furnace--9381136_10808202.html]]></link><description><![CDATA[heating, heat treatment. 
Box type annealing furnace by high temperature box furnace, temperature box furnace, low temperature box type annealing furnace, high temperature box furnace using the highe]]></description><pubDate><![CDATA[20180826]]></pubDate></item>
<item>
<title><![CDATA[Super Soft Grey Back Blockout Fabric AA705-3]]></title><link><![CDATA[https://jcmedia.en.ec21.com/Super-Soft-Grey-Back-Blockout--11825722_11825734.html]]></link><description><![CDATA[direct sunlight and heat sources. The recommended storage temperature and humidity are 15°C [59°F] ~ 35°C [95°F], 20 ~ 65% RH. Under these conditions, the product has a shelf life of up to 1 year]]></description><pubDate><![CDATA[20230727]]></pubDate></item>
<item>
<title><![CDATA[ZG-HA/ELD Series Bearing Induction Heater]]></title><link><![CDATA[https://inductionmachinery.en.ec21.com/ZG-HA-ELD-Series-Bearing--11682717_11905151.html]]></link><description><![CDATA[heaters can replace traditional methods to create a safe and clean working environment.
- Fast and without damage
After heating, the bearing expanded outward in the cylindrical direction, which can a]]></description><pubDate><![CDATA[20240222]]></pubDate></item>
<item>
<title><![CDATA[Connector Assembly Machine]]></title><link><![CDATA[https://welinktech.en.ec21.com/Connector-Assembly-Machine--11836596_11836600.html]]></link><description><![CDATA[heat resistance, and conductivity to meet the requirements of the electrical and electronic industries.
HOW TO USE CONNECTOR ASSEMBLY MACHINE?
Check all required components and make sure the machine ]]></description><pubDate><![CDATA[20230822]]></pubDate></item>
<item>
<title><![CDATA[CX-160/315ZFDelta CNC Controlled Electro Fusion Wire Laying Machine]]></title><link><![CDATA[https://electrofusion.en.ec21.com/CX-160-315ZFDelta-CNC-Controlled--9519568_9519575.html]]></link><description><![CDATA[heating with copper wire, copper wire at both ends of the connection dedicated electric welding machine with terminals.
ELECTROFUSION WIRE LAYING
Electrofusion Welding
Applying a controllable ends em]]></description><pubDate><![CDATA[20150521]]></pubDate></item>
<item>
<title><![CDATA[Asp/Oap/OA15]]></title><link><![CDATA[https://tjfreya.en.ec21.com/Asp-Oap-OA15--9613786_9613826.html]]></link><description><![CDATA[direction, it will add a time delay automatically to avoid unnecessary wear of the valve shaft and gearbox.
4.Motor overheating protection:
There is a thermorelay in the end of the motor winding to c]]></description><pubDate><![CDATA[20150731]]></pubDate></item>
<item>
<title><![CDATA[50l Mini Home 500l Beer Brewing Equipment 800l Micro Brewery]]></title><link><![CDATA[https://woodenpubno.en.ec21.com/50l-Mini-Home-500l-Beer--11827094_11827103.html]]></link><description><![CDATA[Polishing Precision:
0.2-0.4 Micrometer
Volume Design:
Properly
Control system:
PLC
Application:
Brewing Plant
Keywords:
Brewhouse System
Heating method:
Steam(Electric &amp; direct-fire for optional)]]></description><pubDate><![CDATA[20230731]]></pubDate></item>
<item>
<title><![CDATA[Carbide BTA Deep Hole Drilling Inserts TPMX1403/1704/2405/2807 Indexable Cutting Tools]]></title><link><![CDATA[https://carbidedrillinserts.en.ec21.com/Carbide-BTA-Deep-Hole-Drilling--11742289_11742290.html]]></link><description><![CDATA[Direct Sell With Better Quality Control , First Hand Price, imported advanced equipment with Balzers Coating, wear-resistance and high-temp resistance, high precision peripheral grindingEquivalent to]]></description><pubDate><![CDATA[20230307]]></pubDate></item>
<item>
<title><![CDATA[Full Auto Cut To Length Line]]></title><link><![CDATA[https://kingreal.en.ec21.com/Full-Auto-Cut-To-Length--11705059_11705060.html]]></link><description><![CDATA[direct signal automatic shearThe use of gap adjustment design cutting materials, heat treatment can safely shear 2mm steel plate
● Pneumatic stacker devicePneumatic stacking of plates, PLC controll]]></description><pubDate><![CDATA[20230109]]></pubDate></item>
<item>
<title><![CDATA[PVC Production Line      PVC Gloves Equipment Wholesale         PVC Gloves Production Line Exporter]]></title><link><![CDATA[https://gloveequipment.en.ec21.com/PVC-Production-Line--10250471_10250472.html]]></link><description><![CDATA[direct-dipping method. The quality of the product is evenly and colour of it is splendid. Different sorts of products can be make at the same line simultaneously. Length of the line can be 60, 80, 10]]></description><pubDate><![CDATA[20220426]]></pubDate></item>
<item>
<title><![CDATA[Labor Protection Gloves Dipping Machines Factories]]></title><link><![CDATA[https://kitchentowelmachine.en.ec21.com/Labor-Protection-Gloves-Dipping-Machines--10692891_10706953.html]]></link><description><![CDATA[heating system, with high performance control switch, improve the accuracy of temperature control, so as to improve the product percent of pass.
3,Special design of the elasticity of the piston mold ]]></description><pubDate><![CDATA[20221101]]></pubDate></item>
<item>
<title><![CDATA[SMC Oil Tank Mould]]></title><link><![CDATA[https://fql254.en.ec21.com/SMC-Oil-Tank-Mould--11597141_11721833.html]]></link><description><![CDATA[heated mold halves are closed, and up to 2000 psi of pressure is applied. Cycle time ranges from one to five minutes, depending on part size and thickness. Features such as ribs, bosses and inserts c]]></description><pubDate><![CDATA[20230206]]></pubDate></item>
<item>
<title><![CDATA[High Speed Angular Contact Bearing]]></title><link><![CDATA[https://vxolinearmotion.en.ec21.com/High-Speed-Angular-Contact-Bearing--11741589_11782606.html]]></link><description><![CDATA[heat generation.
Reducing NRRO of the main spindle of machine tools improves the process surface quality, and reduced heat generation helps suppress thermal displacement, thereby improving processing]]></description><pubDate><![CDATA[20230505]]></pubDate></item>
<item>
<title><![CDATA[High Precision Components Manufacturing]]></title><link><![CDATA[https://hhcprecision.en.ec21.com/High-Precision-Components-Manufacturing--11858667_11858676.html]]></link><description><![CDATA[heating elements such as electric heating tubes. It is usually processed by automatic lathes.
HHC-0479 Terminal Pin
HHC-0496 Terminal Pin
HHC-0497 Terminal Pin
HHC-0504 Terminal Pin
HHC-0515 Terminal]]></description><pubDate><![CDATA[20231025]]></pubDate></item>
<item>
<title><![CDATA[Induction Heater for Forging]]></title><link><![CDATA[https://tyinduction.en.ec21.com/Induction-Heater-for-Forging--11686230_11822645.html]]></link><description><![CDATA[heating equipment is relatively low-cost and easy to maintain, which can help to reduce the overall cost of manufacturing.
Non-contact heating: Induction heating does not involve direct contact betwe]]></description><pubDate><![CDATA[20230721]]></pubDate></item>
<item>
<title><![CDATA[TZ1600-30 Single-Coating Aluminium Coating Line]]></title><link><![CDATA[https://ltcoatingline.en.ec21.com/TZ1600-30-Single-Coating-Aluminium--11449501_11449507.html]]></link><description><![CDATA[Heating Energy Source: LNG, LPG
Roller coating Process: Continuous 1 side 1 coating &amp; baking
Properties and features:
Roller width:
1800mm
Coils feeding centering adjustment :
±75mm
Threading speed:]]></description><pubDate><![CDATA[20220118]]></pubDate></item>
<item>
<title><![CDATA[8mm Round Shaft Blades Esko Kongsberg Oscillating Knife]]></title><link><![CDATA[https://passiontool.en.ec21.com/8mm-Round-Shaft-Blades-Esko--11737010_11738594.html]]></link><description><![CDATA[direction control is required.
The SR (single round) has a single edge, with the tip offset 4mm from the shaft center (4mm lag).
Part No
Code
Recommend use/Description
Size&amp;Weight
BLD-SR8124
G4245049]]></description><pubDate><![CDATA[20230302]]></pubDate></item>
<item>
<title><![CDATA[Industrial Microwave Components]]></title><link><![CDATA[https://dolphmw.en.ec21.com/Industrial-Microwave-Components--11689661_11837321.html]]></link><description><![CDATA[heating and diamond making.
Working Principle of Industrial Microwave
Many materials are processed by means of microwave heating, and not just for the next meal, although microwave energy is the main]]></description><pubDate><![CDATA[20230823]]></pubDate></item>
<item>
<title><![CDATA[Auto Starter Parts]]></title><link><![CDATA[https://empcasting.en.ec21.com/Auto-Starter-Parts--11594536_11594543.html]]></link><description><![CDATA[heat dissipation potential than any other material.
2.Application of auto starter parts
Ordinary starter
Pemanent magnet starter motor
Direct control starter
Electromagnetic control starter
Forced me]]></description><pubDate><![CDATA[20220629]]></pubDate></item>

</channel>
</rss>