Humidity Temperature Test Wholesale

Water Cooled Chiller Excellent Cooling Chiller 5HP R22/R407C Injection Plastic Chiller

• Min. Order:  

  1 Unit

• Price:  

  US$ 300

• Place of origin:  

  China

• Supply Ability:  

  3000units/thper mon

temperature. It does not require an additional water cooling system and is relatively easy to install and maintain. Air cooled chiller is suitable for places with limited space or where sufficient cooling water cannot be provided. However, the cooling efficiency is affected by ambient temperature and humidity, so it is typically used in applications with lower heat loads. Each model is equipped w

[Related Keywords : water cooled chiller, industry chiller, air cooled chiller]

Component Testing Chamber

• Place of origin:  

  China

test chamber varies depending on the materials and components to be tested. The main function of the test chamber is to provide a test space that simulates the actual application environment. It can accommodate various materials and components, and test their performance under different conditions such as temperature, humidity, and pressure. The test chamber can also maintain constant environment

[Related Keywords : Component testing chamber]

CNC Machining Polycarbonate

• Min. Order:  

  1 Piece

• Price:  

  US$ 20 ~ 999

• Place of origin:  

  China

temperature and humidity, it is an excellent insulating material. At the same time, its good flame retardancy and dimensional stability make PC CNC machined parts form a broad application field in the electronic and electrical industry. Optical lens industry Polycarbonate parts occupy an extremely important position in this field due to its unique characteristics of high light transmittance, high

[Related Keywords : polycarbonate cnc service]

Enviclone Photovoltaic Pv Module Solar Panel Wind Resistance Dynamic Mechanical Load Test Machine

• Place of origin:  

  China

• Supply Ability:  

  50 per year

Test Standards IEC TS 62782 Photovoltaic (PV) modules – Cyclic (dynamic) mechanical load testing IEC 61215 Ed.3 Static: Forward Direction 2400 Pa·1 IEC 61730 MST 34 Equivalent: IEC TS 60904-12, IEC TS 61836, ISO/IEC 17025, etc. Wuxi Enviclone Test Equipment Co., Ltd specializes in environmental simulation and test chambers including temperature humidity chambers, ozone aging chambers, UV aging

[Related Keywords : solar panel test machine, mechanical load tester, pv module test machine, wind resistance tester]

SCM3000 M2M Chip Personalization Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 900000 ~ 1500000

• Place of origin:  

  China

Temperature 23℃±3℃ Working Humidity 50±10% Compressed Air stress: 0.5Mpa Flow rate: 300LPM Communication Interface Ethernet Fuctions of SCM3000 M2M Chip Personalising Machine PARAMETER Input Module 1. Tray Input: up to 20pcs of trays can be loaded. 2. Tape Input: tape in 12mm is supported, 8mm, 16mm and 24mm is extensible; Compatible with tape rolls in 1000pcs and 3000pcs. 3. Compatible wit

[Related Keywords : personalization machine]

Activated Carbon Production Equipment Cocoanut Active Charcoal Production and Regeneration Line

• Place of origin:  

  China

and preheating kiln body, etc. It is matched with various testing equipments such as pressure, temperature and humidity. It has functions such as over-temperature alarm, overload alarm, automatic control of working temperature, and adjustable oxygen in the kiln. The main equipment is from a few meters to twenty meters,Customized processing according to throughput and product characteristics.

[Related Keywords : Activated Carbon Experim, Activated Carbon Recovery, Medical Waste Incineratio]

Temperature Chamber

• Min. Order:  

  1 Box

• Price:  

  US$ 1

• Place of origin:  

  China

temperature and high temperature to test the reliability of your products. A variety of models to choose,type: Benchtop, Floor Stand & Walk In. Size available 50L/80L/100L/225L/500L/1000L/1500L/2000L and more. Thermal Test Chamber Features and Benefits 1. The low temperature range is wide, and the temperature can be freely selected from -20°C/-40°C/-60°C/-70°C to +150°C. 2. Humidity range ca

[Related Keywords : temp humidity chamber]

AC Hose Manufacturer

• Min. Order:  

  1 Set

• Price:  

  US$ 1

• Place of origin:  

  China

The hose must be highly resistant to pressure, temperature, chemicals and stop humidity from permeating the hose wall. Characteristics ● Resistance to refrigerant moisture and heat, excellent resistance to whip test and noise reduction. ● Resistance to aging, ozone, low permeability, and flexibility. ● Specialized tubing is resistant to high compression, ensuring joint integrity.

[Related Keywords : ac hose manufacturer]

7 Inch HMI Touch Screen with 1 Series Interfaces RS485

• Place of origin:  

  China

temperature-10℃~50℃Storage temperature-30℃~70℃Environmental humidity10~90%RH(non-condensing)Vibration10-25Hz (X, Y, Z direction, 2g/30 min)Cooling wayNatural air coolingThe Other ParametersProtection gradeThe front panel conforms to IP65 (with flat plate cabinet installation), and the rear panel conforms to IP20Overall dimensions203*149*34mmEffective display area size153.84*85.63mmOpening

[Related Keywords : Touch Screen]

Altitude Test Chamber

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

temperature, low temperature. It is also called thermal vacuum chambers and temperature altitude chamber. Application: High altitude test chamber can simulate a variety of environmental conditions including temperature, altitude, and humidity, which is important to those manufacturers whose products may be shipped by air. The altitude test chamber is mainly used in aviation, aerospace, communicat

[Related Keywords : Altitude Test Chamber]

Concrete Curing Autoclaves

• Place of origin:  

  Korea

temperature, pressure and water volume etc, after pouring concrete, Concrete curing process protects concrete from any environmental changes. In the curing process, understanding not only hydration but also structure and properties of hardened cement is required. Basic conditions for curing process are as follows: 1. Maintain moderate temperature and humidity. 2. Protect concrete from external

[Related Keywords : Concrete Curing Autoclaves]

A/C Calorimeter

Psychrometric Type Calorimeter, which is based on the principle of Psychrometric Method (Air enthalpy method) and generally used in the test for Room Air Conditioner, Packaged Air Conditioner and Automotive Air Conditioner,to obtain the cooling and heating capacity by measuring the air flow,temperature and humidity at the inlet and outlet of room side and outdoorside.components of the unit t

[Related Keywords : calorimeter]

Polyimide Varnish

• Place of origin:  

  Korea

temperature is 350℃, momentary temperature is over 400℃. It cannot be used for all kinds of organic solvents and it has resistance against the chemicals such as acid or alkali. Primary varnish Features Solvent (NMP) Solid Concentration (15 .0 ± 5wt%) Viscosity (3,000 ± 600 Cps) Density (1.1 ± 0.01g/ml) Primary Features after film cure Superior heat-resistant, Humidity-res

[Related Keywords : Manufacturing technologies, PICOMAX, Polyimide varnish, Thermosetting Polyimide]

4PCS FLYBACKS 200/300W HV CO2 Laser Power Supply Units 300W CO2 Power Source

• Min. Order:  

  50 Set

• Price:  

  US$ 356 ~ 376

• Place of origin:  

  China

• Supply Ability:  

  4000PCS each month

temperature -10 ℃~50 ℃ Storage of temperature -20 ℃~75 ℃ Relative Humidity Maximum 85%RH (non-condensing) Altitude 100,000 feet of work 200,000 feet of storage,dose not work Cooling methods Forced air cooling (fan cooling) Dimensions (LxWxH) 390mmx240mmx105mm 1 0 .BR-60W CO2 POWER SUPPLIES Feature 1 .Both analog signals of 0 to 5V and PWM signals are used to control and regulate this AC1

[Related Keywords : 200W CO2 power source, 300watt HV CO2 PSU, hv co2 laser psu, CO2 POWER SUPPLY]

Good Price 4 Axis CNC Router with High Z Axis

• Min. Order:  

  1 Set

• Price:  

  US$ 11000~12000

• Place of origin:  

  China

• Supply Ability:  

  100

Temperature 0 - 45 Centigrade 24 Relative Humidity 30% - 75% 25 Packing Size 4.1*2.3*2.6m 26 N.W. 1600KG 27 G.W. 1800KG 28 Optional Parts Dust Collector/ Dust Hoods for three Axis Vacuum Pump Rotary System Mist-cooling System SIEMENS/DELTA/ Panasonic Servo Motors Colombo Spindle X:2m, Y:4m, Z:1m Remove columnRemove rowInsert columnInsert rowMerge RightMerge DownSplit HorizontalSplit VerticalBackg

[Related Keywords : 4 Axis CNC Router]