EC21 Product Catalogs - kn

RYJ 2000A Sintering Presser

20260330

KN. Rated oil pressure: 20MPa. Rammer size: 250 x250mm Heating power: 60KVA. Current of heating: 10000A. Motor power: 0.75KW Jacket water: 30L/min. Net weight: 1200kgs. Dimension: 1250*1060*1680mm It

FD-12T Flat Thread Rolling Machine Hydraulic Screw Thread Rolling Machine Rebar

20250401

1. Automatic feeding with adjuatable brackets 2. Speed is adjutable for different products 3. 54mm hole diamter for SKD11/DC53 thread rolling dies 4. Max. Rolling pressure is about 120KN 5. It is ea

Portal Frame Power-Operated Hydraulic Press

20240731

KN的 300 500 630 1000 1500 压力兆帕 25 25 30 30 30 旅行毫米 200+270 220+405 220+405 250+405 250+405 工作台尺寸毫米 300*400 480*360 400*500 440*980 440*980 尺寸毫米 1160*550*16

Z28-200 Hydraulic Rebar Thrufeed Thread Rolling Machine

20230206

Model Z28-200 threaded rod thread rolling machine technical parameter: Rolling thread range Diameter 64mm Max thread pitch 6mm Spindle angle ±10° Max rolling pressure 300kn Spindle RPM 22/28/35/45

Z28-200 Threaded Rod Production Machines, Automatic Thread Rolling Machine for Thailand

20230703

kn Spindle RPM 22/28/35/45/56/70rpm Roller size range Outside diameter 210mm Hole 75mm Max width 150mm Rolling time 0.1-99.9s Rest time 0.1-99.9s Spindle drive power 11kw Hydraulic transmission powe

Metal Steel Thread Rolling Machine

20231127

Metal steel thread rolling machine Max rolling pressure 260KN Length Unlimited Rolling material diameter range Radial feed Φ90mm Spindle speed 16、26、38、55、90(r/min) Axial feed Φ60mm Thread

Pneumatic C-Frame Single Crank Safe Press Machine Power Press Gap Frame Press C Frame Press

20160629

Pneumatic C-Frame Single Crank Safety Press Machine JH21 Model is videly used for shearing, punching, blanking, bending and drawing, the nominal capacity is from 250 to 4000 KN.

Hydraulic Metal Baler

20191126

kN) 3150 Dimension of compress room (L*W*H) (mm) 2000*1400*1200 Bale dimension (L*W*H)(mm) (400-700)*450*450 Bale density (kg/m3 ) > 1800 Capacity (kg/h) 3500-5000 Single cycle time(s) < 160 Power (k

CNC Angle Punching, Marking and Single-blade Shearing Line

20131031

kN) 950 Marking force(kN) 700 Shearing force (kN) 2030 Maximum raw material length 14 Back mark adjustment range 15~110 Punch numbers at each side 3 Marking Character box 4 Character size 14x10x19 CN

Hydraulic Container Shear for Metal Scrap

20171209

kN 2. Metal scraps are all cut inside the chamber, so this range of scrap metal shear can effectively prevent operatives from being hurt by splashy materials. 3.The feeding chamber of this container

Engine Cap Riveting Machine JM12C-PLC,CNC Riveting Machine, Radial Riveting Machine

20190219

Kn 2. Max.processing ability Φ12mm 3. Cylinder strocke 30mm,60mm,80mm, as optional 4. Riveting pin length 50mm, 85mm, 120mm, as optional 5. Two-dimensional bench 600mmx350mm 6. Moves: X-direction 60