<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - 3 steps]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/3_steps--0927/1/3 steps.html]]></link><item>
<title><![CDATA[400Mhz RF Module]]></title><link><![CDATA[https://goal270.en.ec21.com/400Mhz_RF_Module--11919418_11919420.html]]></link><description><![CDATA[34mA Typically
With MCU
Spurious emission
&lt;-55dB
RX TO TX Turn on time
10msec Typically
Loop Filter BW = 2,4KHz
Turn time(12.5KHz step)
16msec Typically
Loop Filter BW = 2,4KHz
BCH frame decoding tim]]></description><pubDate><![CDATA[20250323]]></pubDate></item>
<item>
<title><![CDATA[Air-Conditioner Soft Start Controller Rj-Assu380p12 for Three Phase 380VAC 12p]]></title><link><![CDATA[https://rjzhuhai01.en.ec21.com/Air_Conditioner_Soft_Start_Controller--10825808_10825843.html]]></link><description><![CDATA[30mm (L*W*H)Weight: about 0.66 kg
Terminal parameter
A, B, C
This is the three-phase power supply input terminals, the internal is three way SCR step-down circuit, input current capacity: no more tha]]></description><pubDate><![CDATA[20240929]]></pubDate></item>
<item>
<title><![CDATA[Xzz IT8390 Programmer It85xx It83xx Chip Read Write Burning Tool]]></title><link><![CDATA[https://diyfixtoolci.en.ec21.com/Xzz_IT8390_Programmer_It85xx_It83xx--12000404_12000408.html]]></link><description><![CDATA[steps are the same as the read chip process).2. Use three DuPont cables to connect the SM bus on the battery holder of the motherboard to any ground (no need to connect for power supply).3. Use the T]]></description><pubDate><![CDATA[20240907]]></pubDate></item>
<item>
<title><![CDATA[New Arrival JIKONG Bms JK-PB1A16S10P JK-PB1A16S15P JK-PB2A16S15P JK-PB2A16S20P Active Balance Smart]]></title><link><![CDATA[https://23445bella.en.ec21.com/New_Arrival_JIKONG_Bms_JK--11964892_11965646.html]]></link><description><![CDATA[steps, to test if each cell voltage is the same with voltmeter? if the cell voltage difference is over 0.1V, the fault is displayed that it cannot run far, no power supply at thestart range, short ch]]></description><pubDate><![CDATA[20240709]]></pubDate></item>
<item>
<title><![CDATA[Megger MIT515 - Insulation Resistance Tester]]></title><link><![CDATA[https://focuscalibration.en.ec21.com/Megger_MIT515_Insulation_Resistance_Tester--11927627_11927658.html]]></link><description><![CDATA[steps from 1 kV to the max. test voltage.Voltage, capacitance with time constant, and leakage current can be measured by the MIT515. The unit features timer control, timer display, 3mA test currents,]]></description><pubDate><![CDATA[20240421]]></pubDate></item>
<item>
<title><![CDATA[Mobile Control Robot SJV-W1000]]></title><link><![CDATA[https://seergroup.en.ec21.com/Mobile_Control_Robot_SJV_W1000--11573640_11573644.html]]></link><description><![CDATA[step/gap)[2]
≤5%/5mm/30mm
Performance parameters
Minimum passable width
850mm
Navigation position accuracy[3]
±5mm
Navigation angle accuracy[3]
±0.5°
Navigation speed
≤ 1.6m/s
Map area (single]]></description><pubDate><![CDATA[20220523]]></pubDate></item>
<item>
<title><![CDATA[Customized Lithium Battery Pack with Bms]]></title><link><![CDATA[https://pacebattery.en.ec21.com/Customized_Lithium_Battery_Pack_with--11542058_11542060.html]]></link><description><![CDATA[3-4 times longer than lead-acid batteries, without losing effectiveness over time; With advanced Battery Management System(BMS), lithium-ion battery packs are safer. As one of the professional 
build]]></description><pubDate><![CDATA[20220311]]></pubDate></item>
<item>
<title><![CDATA[Automatic Safety Test System]]></title><link><![CDATA[https://15317383997.en.ec21.com/Automatic_Safety_Test_System--11812738_11858069.html]]></link><description><![CDATA[steps per group• Quick discharge. Support 50Hz and 60Hz frequency; Electric safety wall detecting feature• The LS9955 can test Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Curre]]></description><pubDate><![CDATA[20231024]]></pubDate></item>
<item>
<title><![CDATA[Fluke 1555 FC W/IR3000FC]]></title><link><![CDATA[https://geomultimeter1.en.ec21.com/Fluke_1555_FC_W_IR3000FC--11866765_11866854.html]]></link><description><![CDATA[steps from 250 to 1000 V, and 100 V steps 1000 VMeasurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recallLong battery life giv]]></description><pubDate><![CDATA[20231115]]></pubDate></item>
<item>
<title><![CDATA[Melting Point Apparatus]]></title><link><![CDATA[https://jiahang1.en.ec21.com/Melting_Point_Apparatus--11600339_11723478.html]]></link><description><![CDATA[steps steplessly adjustable)
*Temperature control method:
PID precise temperature control, fully enclosed design of furnace body
*Map:
any zoom, easy to view any details of the map
*Accuracy:
±0.2]]></description><pubDate><![CDATA[20230208]]></pubDate></item>
<item>
<title><![CDATA[High Precision Automatic Rotary Die Cutting Machine Laser Cut Equipment for Film Layer Label Sticker]]></title><link><![CDATA[https://rotarydiecutmachine.en.ec21.com/High_Precision_Automatic_Rotary_Die--11839222_11839354.html]]></link><description><![CDATA[steps, reducing production time and costs.
3. Versatility and Flexibility: The machine can handle a wide range of materials and designs, making it suitable for various types of flexible circuit board]]></description><pubDate><![CDATA[20230829]]></pubDate></item>
<item>
<title><![CDATA[WSD-ZW32-24GD Outdoor AC High Voltage Vacuum Circuit Breaker]]></title><link><![CDATA[https://wisdompe.en.ec21.com/WSD_ZW32_24GD_Outdoor_AC--11000759_11000803.html]]></link><description><![CDATA[WSD-ZW32-24GD Outdoor AC high voltage vacuum circuit breaker
Overview
WSD-ZW32-24GD Outdoor AC high voltage vacuum circuit breaker
(hereinafter referred to as circuit breaker) is a rated voltage of 2]]></description><pubDate><![CDATA[20240313]]></pubDate></item>
<item>
<title><![CDATA[Dust Collector : SILENCE-M70]]></title><link><![CDATA[https://komax2031.en.ec21.com/Dust_Collector_SILENCE_M70--10996859_11335494.html]]></link><description><![CDATA[3750L/min (230V) / 3660L/min (120V)
- Output power : 1251W (230V) / 1247W (120V)
- Current : 5.2A (230V) / 10A (120V)
- Motor’s RPM : 32,000RPM
- Noise level : MAX.55dB
- Suction level : 1-9 step
-]]></description><pubDate><![CDATA[20220208]]></pubDate></item>
<item>
<title><![CDATA[Engine Puller]]></title><link><![CDATA[https://cwse.en.ec21.com/Engine_Puller--941615_941854.html]]></link><description><![CDATA[30mm
Engine
Diesel 125HP
Diesel 185HP
Step
Forward 5 step, Reverse 1 step
Capstan dia.
380mm
400mm
Dimensions(L x W x H)
3,740 x 1,880 x 1,730mm
3,850 x 1,950 x 1,800mm
Weight
3,300kg
4,000kg
Option ]]></description><pubDate><![CDATA[20130424]]></pubDate></item>
<item>
<title><![CDATA[SP108E LED Controller]]></title><link><![CDATA[https://hanronlighting.en.ec21.com/SP108E_LED_Controller--9080265_11643593.html]]></link><description><![CDATA[steps:1) When the device is not connected to any WIFI network, power on the controller and wait for 20s and then controller will switch intoAP mode ;2) In the WIFI setting page,find and connect the c]]></description><pubDate><![CDATA[20220922]]></pubDate></item>
<item>
<title><![CDATA[CMC-MX 7.5KW-220KWBuilt-in Bypass Soft Starter]]></title><link><![CDATA[https://xichi2015.en.ec21.com/CMC_MX_7.5KW_220KWBuilt_in--9554986_9565934.html]]></link><description><![CDATA[step change, which perfectly avoids mechanical and electrical impact as a result of using direct start, Y-△ start and auto-induction voltage-reduced start to start motor and can effectively reduce ]]></description><pubDate><![CDATA[20220406]]></pubDate></item>
<item>
<title><![CDATA[Generator Excitation System]]></title><link><![CDATA[https://hestelectrical.en.ec21.com/Generator_Excitation_System--9564982_9565031.html]]></link><description><![CDATA[3ms/period 
5. Voltage adjustment range: 10%～130%Ue(manual 10%～110%Ue) 
6. Voltage adjustment precision: Superior to 0.5% 
7. Difference adjustment characteristics: &amp;plusmn;15% can be set, step l]]></description><pubDate><![CDATA[20150625]]></pubDate></item>
<item>
<title><![CDATA[Cobalt-free Humidity Indicator Card (HIC)]]></title><link><![CDATA[https://yukic.en.ec21.com/Cobalt_free_Humidity_Indicator_Card--3739735_4149520.html]]></link><description><![CDATA[step supply humidity indicator cards all comply with RoHs,MSDS,J-STD-033B,cobalt-free test,REACH and so on. 
9,1step is the only one factory in china who has registered its own trademark of humidity ]]></description><pubDate><![CDATA[20180315]]></pubDate></item>
<item>
<title><![CDATA[AB Part Epoxy and PU Resins for Potting and Encapsulation of PCB]]></title><link><![CDATA[https://xd5358840.en.ec21.com/AB_Part_Epoxy_and_PU--6307152_11501925.html]]></link><description><![CDATA[Stepping motor/High-precision, wear-resistant,
long-life Gear pump
Working voltage
AC 220V 50Hz/60Hz
Power requirement
3.55KW
Air pressure requirement
4.5-8KG
Machine Dimension
1500(L)*1200(W)*1500(H]]></description><pubDate><![CDATA[20220101]]></pubDate></item>
<item>
<title><![CDATA[Emerson CON011]]></title><link><![CDATA[https://modal.en.ec21.com/Emerson_CON011--11854992_11855033.html]]></link><description><![CDATA[step-by-step execution and program code diagnostics functions can be used to analyze the behavior of DFBs. Setting a breakpoint in a DFB instance stops execution of the task containing this block.
Be]]></description><pubDate><![CDATA[20240112]]></pubDate></item>
<item>
<title><![CDATA[JT6322A High Accuracy Electronic Load Controller]]></title><link><![CDATA[https://jartul650413abcd.en.ec21.com/JT6322A_High_Accuracy_Electronic_Load--9521240_9571242.html]]></link><description><![CDATA[steps and 2us resolution.
Support up to 50kHz complex waveform editing.
Each step current slew rate can be programmed.
Automatic OCP Testing &amp; Pmax Measurement
Automatically test OCP.
Capture automat]]></description><pubDate><![CDATA[20170215]]></pubDate></item>
<item>
<title><![CDATA[Load Bank]]></title><link><![CDATA[https://conemh.en.ec21.com/Load_Bank--10280602_10280603.html]]></link><description><![CDATA[3. Portable or Permanant Mounting 
4. Capacity 
5. Load step Resolution 
6. Internal and/or External Control Power 
7. Blower Voltage Requirements 
8. Indoor or Outdoor Service 
9. Core Dimensions an]]></description><pubDate><![CDATA[20170116]]></pubDate></item>
<item>
<title><![CDATA[Voltage Stabilizer Servomotor Controlled in Pure Copper Winding.]]></title><link><![CDATA[https://tecnolazer.en.ec21.com/Voltage_Stabilizer_Servomotor_Controlled_in--9371680_9371681.html]]></link><description><![CDATA[300-9446168 
Ring Road, Band Road, Lahore Pakistan. 
A Servo Stabilizer That Decreases 30 Volts (back-from 250 to 220 &amp; Increases 70 Volts from 150 to 220) (&amp;plusmn;) 1% 
{CAN STEP-UP from even low (]]></description><pubDate><![CDATA[20150128]]></pubDate></item>

</channel>
</rss>