<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - 50 off]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/50_off--2673/1/50 off.html]]></link><item>
<title><![CDATA[Rectifier Power Supply for Brush Plating, Constant Voltage Power Supply with Ampere Metering Functio]]></title><link><![CDATA[https://creview.en.ec21.com/Rectifier_Power_Supply_for_Brush--12015860_12015871.html]]></link><description><![CDATA[50Hz (or 60Hz) AC power, push up (close) the switch to switch on the external 220V AC input. Pull down (off) the switch to disconnect the external AC input. In the disabled state, the external AC inp]]></description><pubDate><![CDATA[20260415]]></pubDate></item>
<item>
<title><![CDATA[Trenchless Mud System for Basic Engineering Construction]]></title><link><![CDATA[https://ogem3.en.ec21.com/Trenchless_Mud_System_for_Basic--9783715_9845712.html]]></link><description><![CDATA[off walls.
1, mud purification and helpful to the control performance of the slurry, reduce sticking accidents, and improve the quality of pore-forming.
2, effective separation of soil crusts, pore-f]]></description><pubDate><![CDATA[20250305]]></pubDate></item>
<item>
<title><![CDATA[Multi-needles Automatic Embroidery Machine]]></title><link><![CDATA[https://inbrotech.en.ec21.com/Multi_needles_Automatic_Embroidery_Machine--792360_792361.html]]></link><description><![CDATA[off the X or Y axis. This application is ideal for 
patch embroidery or repetitive embroidery requirements. 
Built-in a floppy disk drive 
Inbro&apos;s machine allows for quick design through a built- in ]]></description><pubDate><![CDATA[20250215]]></pubDate></item>
<item>
<title><![CDATA[X-1dry Ice Machine]]></title><link><![CDATA[https://djpowerfx.en.ec21.com/X_1dry_Ice_Machine--11941313_12038403.html]]></link><description><![CDATA[50㎡;
5 minutes of run time when full on, 10 minutes of run time when 50% output;
All stainless-steel metal parts, firm, durable and extremely low failure rate;
Easy to pour out the remaining water ]]></description><pubDate><![CDATA[20250121]]></pubDate></item>
<item>
<title><![CDATA[Ozone Water Generator]]></title><link><![CDATA[https://qjozonetech.en.ec21.com/Ozone_Water_Generator--11938412_12036987.html]]></link><description><![CDATA[off machine if no water in mixing pump
● Over-temperature protection
● Integrate ozone generators, mixing pump(venturi and booster pump optional) and contact tank.
● No extra installation, comp]]></description><pubDate><![CDATA[20250115]]></pubDate></item>
<item>
<title><![CDATA[30-50KW High Frequency Induction Heating Machine]]></title><link><![CDATA[https://duolin.en.ec21.com/30_50KW_High_Frequency_Induction--12026187_12026189.html]]></link><description><![CDATA[Power 30-300KW Work Frequency 50-250Khz
Digital display Constant power and current output
Safe,Low voltage output
PLC interface available for automatic work
Wide inductance to connect with different ]]></description><pubDate><![CDATA[20241121]]></pubDate></item>
<item>
<title><![CDATA[Steel Cutting Machine]]></title><link><![CDATA[https://hopeland2010.en.ec21.com/Steel_Cutting_Machine--4261220_4267394.html]]></link><description><![CDATA[50
Cutting length precision
≤L/5000
Speed
40m/min
Hydraulic motor power
Y132M1-6 5.5KW
Wire feed motor power
Y100L1-4 2.2KW
Overall size(L×W×H)mm
1500X900X1600 (exclude charging tray/let-off appa]]></description><pubDate><![CDATA[20241113]]></pubDate></item>
<item>
<title><![CDATA[Rice Cooker Tubular Heater Winding Machine]]></title><link><![CDATA[https://osneq.en.ec21.com/Rice_Cooker_Tubular_Heater_Winding--12017287_12017288.html]]></link><description><![CDATA[off to achieve the desired result. This machine uses PLC, touch screen, and high-speed encoder as control components, which can accurately control the winding resistance. As long as the required resi]]></description><pubDate><![CDATA[20241014]]></pubDate></item>
<item>
<title><![CDATA[Automatic Cutter for Heat Shrink Tubing Silicone Rubber Tube Medical Hose Cut To Length]]></title><link><![CDATA[https://yueyeuniao1112.en.ec21.com/Automatic_Cutter_for_Heat_Shrink--10737675_10737311.html]]></link><description><![CDATA[50mm long)
2. Accuracy: Cut-length is accurate. Material is sent by a stepping motor.
3. Cutting type: Cutting is neat due to using a cold cutter which is durable.
4. Automatic operation: It works au]]></description><pubDate><![CDATA[20240915]]></pubDate></item>
<item>
<title><![CDATA[Heating Oven]]></title><link><![CDATA[https://hengjiujinye.en.ec21.com/Heating_Oven--11982428_11982656.html]]></link><description><![CDATA[500 x depth 1400 (mm)
Cold rolled inner liner material
Internal layered triangular track with flatbed trolley, capable of bearing 1 ton (self-made by the customer)
Outer wall material: cold steel pla]]></description><pubDate><![CDATA[20240809]]></pubDate></item>
<item>
<title><![CDATA[Narrow Web 13 Inch 330 Turret Rewinding Machinery Adhesive Tapes Roll Form Label Inline and Off Line]]></title><link><![CDATA[https://hengmingmachinery1.en.ec21.com/Narrow_Web_13_Inch_330--11947033_11951634.html]]></link><description><![CDATA[off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting &amp; rewinding and automatic label sticking, which can finish]]></description><pubDate><![CDATA[20240715]]></pubDate></item>
<item>
<title><![CDATA[Automatic Steel Mesh Welding Machine for Coal Mine]]></title><link><![CDATA[https://dingniumachines.en.ec21.com/Automatic_Steel_Mesh_Welding_Machine--11072922_11072938.html]]></link><description><![CDATA[off and catch the net.
4. When the machine is adjusted, it can be produced automatically. There is no stopping time.
Dingniu factory is Automatic Coal Mine Mesh Welding Machine manufacturer
.Our fact]]></description><pubDate><![CDATA[20240712]]></pubDate></item>
<item>
<title><![CDATA[Newest S-Shape 30k Cavitation Machine with 160mw Lipo Laser]]></title><link><![CDATA[https://fgidj123456.en.ec21.com/Newest_S_Shape_30k_Cavitation--11953367_11954287.html]]></link><description><![CDATA[50nm visible red light, and because the 160mw power is far greater than the 5mw used for most cavitation lipo laser machines, the penetration of the fat layer is much deeper. Advantages of 30k S-Shap]]></description><pubDate><![CDATA[20240620]]></pubDate></item>
<item>
<title><![CDATA[Controller Module PFSK160A 3BSE009514R1]]></title><link><![CDATA[https://wwww666666.en.ec21.com/Controller_Module_PFSK160A_3BSE009514R1--11939088_11941673.html]]></link><description><![CDATA[OFF), which drives the output solid- 　　state switch. The output demand state reading back signal is compared to the expected output drive state. If there is a mismatch, the channel is marked as &quot;]]></description><pubDate><![CDATA[20240523]]></pubDate></item>
<item>
<title><![CDATA[IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment]]></title><link><![CDATA[https://pegoelectronics.en.ec21.com/IEC60529_IPX5_and_IPX6_Jet--11940576_11941014.html]]></link><description><![CDATA[50L water tank is built in control box. The test distance is controlled by manual. 
Jet hose nozzle with internal diameter of 6.3mm is for IPX5 jet-proof testing, the water flow rate is 12.5L/min, an]]></description><pubDate><![CDATA[20240522]]></pubDate></item>
<item>
<title><![CDATA[CK210 Small CNC Lathe]]></title><link><![CDATA[https://yornewmachine.en.ec21.com/CK210_Small_CNC_Lathe--11380514_11380519.html]]></link><description><![CDATA[off when door open.
(15). Applicable industry: technology development, advertising design, art, ocational technical college Education &amp; Training CNC and DIY enthusiasts.
Technical parameters 
Turning]]></description><pubDate><![CDATA[20240518]]></pubDate></item>
<item>
<title><![CDATA[AWGAGE-150 Metal Film Metrology]]></title><link><![CDATA[https://allwin21.en.ec21.com/AWGAGE_150_Metal_Film_Metrology--9763377_9763391.html]]></link><description><![CDATA[AWgage-150 measures sheet resistance in ohms per square or milliohms per square. If specific resistivity is known, the thickness of the deposited film layer can be computed from the sheet resistance.]]></description><pubDate><![CDATA[20240514]]></pubDate></item>
<item>
<title><![CDATA[1325 Stone Carving Machine   Stone Cutting Machine China   Stone CNC Machine Suppliers]]></title><link><![CDATA[https://cncroutercn.en.ec21.com/1325_Stone_Carving_Machine_Stone--11411124_11411135.html]]></link><description><![CDATA[off point carving, easy to operate.
6. The table is equipped with a thickened stainless steel tank and two-way cooling cutter, which can effectively improve the service life of the cutter.
7. Softwar]]></description><pubDate><![CDATA[20240418]]></pubDate></item>
<item>
<title><![CDATA[DK7780F CNC Electric Spark Wire Cutting Machine Tool(Super Machine Tool)]]></title><link><![CDATA[https://wjcncmachine.en.ec21.com/DK7780F_CNC_Electric_Spark_Wire--10984002_11005437.html]]></link><description><![CDATA[off CNC Machine Tool
X, Y, U, V stepper motor
Number of control axis
Four-axis linkage
Min instruction unit
mm
0.001
Power supply
380VAC/50HZ Three-phase four-wire 380VAC/50HZ 
Max operating current
]]></description><pubDate><![CDATA[20240322]]></pubDate></item>
<item>
<title><![CDATA[Metal Flue Gas Treatment System]]></title><link><![CDATA[https://sdngroups.en.ec21.com/Metal_Flue_Gas_Treatment_System--11906760_11906761.html]]></link><description><![CDATA[off by blowback Into the ash bin for recycling.
4. Comparison Advantages of Flexible Membrane
ItemFlexible MembraneP84 glass fiberFlumaxGlass fibrePPS needleMettas needleWeight (g/m2)800-1000800-900.]]></description><pubDate><![CDATA[20240227]]></pubDate></item>
<item>
<title><![CDATA[Welding Coupler]]></title><link><![CDATA[https://hyt2806.en.ec21.com/Welding_Coupler--11680430_11680431.html]]></link><description><![CDATA[50~ 80N/mm2 to 720~760N/mm2 because the process is naturally followed by annealing, that is, post-welding slow cooling. In order to increase its strength, generally, SD600 rebar should go through rol]]></description><pubDate><![CDATA[20221125]]></pubDate></item>
<item>
<title><![CDATA[Wafer Back Grinding Wheel]]></title><link><![CDATA[https://egrindwheel.en.ec21.com/Wafer_Back_Grinding_Wheel--11777670_11777688.html]]></link><description><![CDATA[50 years of experience in the super abrasives industry, we&apos;re providing the best products, great service, and professional technical support that meet and exceed our customers&apos; needs.
We can also off]]></description><pubDate><![CDATA[20230427]]></pubDate></item>
<item>
<title><![CDATA[Oxygen Generator]]></title><link><![CDATA[https://ahcb.en.ec21.com/Oxygen_Generator--11758831_11759998.html]]></link><description><![CDATA[off start, which can be used under abnormal no-power conditions. The
device has the advantages of being lightweight, small in size, large oxygen
supply, simple operation, and strong environmental ada]]></description><pubDate><![CDATA[20230329]]></pubDate></item>
<item>
<title><![CDATA[China Miniature Circuit Breaker Automatic Assembly and Inspecting Line]]></title><link><![CDATA[https://hongxinagio.en.ec21.com/China_Miniature_Circuit_Breaker_Automatic--11910307_11910308.html]]></link><description><![CDATA[off function is tested. After passing the test, rivets are installed, pressed again, and the screws are removed. All installations are checked, and after passing the test, they are transferred to the]]></description><pubDate><![CDATA[20240310]]></pubDate></item>
<item>
<title><![CDATA[M16 Bolt Forming Machine]]></title><link><![CDATA[https://ronengroup.en.ec21.com/M16_Bolt_Forming_Machine--11846269_11846271.html]]></link><description><![CDATA[50
280
200
350
Main motor power
kw
11
18.5
18.5
22
30
30
Overall dim.of cut off die
mm
Φ35*45L
Φ35*56L
Φ45*59L
Φ45*59L
Φ63*69L
Φ55*70L
Overall dim.of punch die
mm
Φ40*90L
Φ45*125L
Φ53*115L
]]></description><pubDate><![CDATA[20230920]]></pubDate></item>
<item>
<title><![CDATA[Round-Shape Edge Corner Protector Cardboard - Cardboard Corner Guards]]></title><link><![CDATA[https://dungnguyenhlc.en.ec21.com/Round_Shape_Edge_Corner_Protector--11853532_11853592.html]]></link><description><![CDATA[50 mm6000 mmB30 mm120 mmC30 mm80 mmD2 mm4 mmE35 mm2000 mm 
Material: Kraft paperColor: BrownOrigin: VietnamPackage: Packing in PalletLeadtime: 5-7 daysApplication
Round-Shape Corner Protector Cardboa]]></description><pubDate><![CDATA[20231012]]></pubDate></item>
<item>
<title><![CDATA[Air Vacuum Quenching Furnace Hardening for Extrusion Die Air-Cooled Horizontal]]></title><link><![CDATA[https://furnacevac.en.ec21.com/Air_Vacuum_Quenching_Furnace_Hardening--11856448_11856449.html]]></link><description><![CDATA[off. Next, the furnace chamber and quench loop are backfilled with a non-reactive gas, commonly nitrogen or argon. The quench blower then activates, forcing the gas through quench nozzles located cir]]></description><pubDate><![CDATA[20231019]]></pubDate></item>
<item>
<title><![CDATA[High Frequency Induction Heating Machine]]></title><link><![CDATA[https://cnjkz.en.ec21.com/High_Frequency_Induction_Heating_Machine--11384694_11384703.html]]></link><description><![CDATA[50KHZ ~ 120KHZ. It is widely used in induction welding, tool welding, pipe welding, thermal nesting, thermal packaging, etc.
Advantages of JKZ high frequency induction heating equipment
Strict select]]></description><pubDate><![CDATA[20210520]]></pubDate></item>
<item>
<title><![CDATA[Small Distilled Water Equipment Household]]></title><link><![CDATA[https://xxx1234567.en.ec21.com/Small_Distilled_Water_Equipment_Household--11878335_11879529.html]]></link><description><![CDATA[USE: 
Medical/Dental/Household/Laboratory/Beauty
FEATURE: 
1.Have an ON/OFF switch button, no need unplug the power code for stop the machine, easy
and safety. 
2.Have an Fuse Holder with 2XF10A, it ]]></description><pubDate><![CDATA[20231225]]></pubDate></item>
<item>
<title><![CDATA[Small Bench Top CNC Lathe Education Machines]]></title><link><![CDATA[https://xendoll2020.en.ec21.com/Small_Bench_Top_CNC_Lathe--11201645_11865853.html]]></link><description><![CDATA[off when door
open.
(15). Applicable industry:
technology development, advertising design, art, technical college Education
&amp; Training CNC and DIY enthusiasts.
Specification
(Technical parameter) 
Pr]]></description><pubDate><![CDATA[20231113]]></pubDate></item>
<item>
<title><![CDATA[Control Valve for CAT SBS80 Series Piston Pump]]></title><link><![CDATA[https://heavyequipmentmainta.en.ec21.com/Control_Valve_for_CAT_SBS80--11586014_11631018.html]]></link><description><![CDATA[50E PUMP CAT 990 WHEEL LOADER PUMP CAT 844 WHEEL TRACTOR CAT D11N, D11R TRACK-TYPE TRACTOR CAT D250E, D300E, 730, 725 ARTICULATED TRUCK CAT 711D, 766D, 773D, 773E, 773F, 784C QUARRY OFF HIGHWAY TRUCK]]></description><pubDate><![CDATA[20220901]]></pubDate></item>
<item>
<title><![CDATA[Trustor DIsc Brake]]></title><link><![CDATA[https://thelema.en.ec21.com/Trustor_DIsc_Brake--2851963_2851968.html]]></link><description><![CDATA[off and lining abrasion thereon, and therefore, in-between maintenance can be evaded.
Specification
Installation Method : Horizontal base plate
Enclosure : Dust proof, Water proof (IP 65) 
Input : AC]]></description><pubDate><![CDATA[20080607]]></pubDate></item>
<item>
<title><![CDATA[Grinding Wheel]]></title><link><![CDATA[https://qmachine0621.en.ec21.com/Grinding_Wheel--36877_8737495.html]]></link><description><![CDATA[50x13x6mm
16) Superfinishing stone
17) Depressed centre wheels dia50mm - 230mm (3,4,6Thickness).Hole(9.53,16,22mm)
18) Flexible wheel dia100x2x16,100x3x16,115x3x22,125x3x22,180x3x22
19) Cut-off Wheel]]></description><pubDate><![CDATA[20180423]]></pubDate></item>
<item>
<title><![CDATA[2pcs Flybacks 100W CO2 HV Laser Power Supply 100watt HV CO2 PSU]]></title><link><![CDATA[https://zrsuns.en.ec21.com/2pcs_Flybacks_100W_CO2_HV--11839618_11840130.html]]></link><description><![CDATA[500 times on/off check for 7 seconds.
5. Input analog signal(0~5V) or PWM is selected to control the output laser power on this 100w laser power supply unit.
6. The 100w laser power supply unit has H]]></description><pubDate><![CDATA[20230831]]></pubDate></item>
<item>
<title><![CDATA[3) Dry End]]></title><link><![CDATA[https://techxcel.en.ec21.com/3_Dry_End--456274_457528.html]]></link><description><![CDATA[50 x 2mm
Operation : Air cylinder pressure by aolenoid valve
Grinding level : 0.02~0.03 a type
Min. Eage for sutting : 5mm of each side
3. Rotary N.C Cut Off
(Model Number : N.C Cutter)
Specification]]></description><pubDate><![CDATA[20090326]]></pubDate></item>
<item>
<title><![CDATA[Robot Fiber Laser Welding Machine with Seam Tracking System]]></title><link><![CDATA[https://cmbio12.en.ec21.com/Robot_Fiber_Laser_Welding_Machine--11774782_11775540.html]]></link><description><![CDATA[off with laser welding. Robotic laser welding has a much smaller heat-affected zone, so distortion is minimized regardless of the type of metal being welding.
Robotic laser welding is an accurate, cl]]></description><pubDate><![CDATA[20240318]]></pubDate></item>
<item>
<title><![CDATA[Industrial Essential Oil Extraction Machine]]></title><link><![CDATA[https://jnban733.en.ec21.com/Industrial_Essential_Oil_Extraction_Machine--11591484_11785776.html]]></link><description><![CDATA[off-odor/flavor as well as physical change such as the increased viscosity can occur. Those changes in extracted essential oil must be avoided.Steam distillation is the most widely used method for pl]]></description><pubDate><![CDATA[20230509]]></pubDate></item>
<item>
<title><![CDATA[Small Cable Granulator and Separator       Mini Copper Wire Granulator Separator]]></title><link><![CDATA[https://optimarecycling.en.ec21.com/Small_Cable_Granulator_and_Separator--11514917_11582635.html]]></link><description><![CDATA[50 kg per hour.
Machine weight: 600kg
Machine size: 1100mm * 1100mm * 1800mm, with 4 wheels at the bottom
Tool: D2 material is used
Technology: Italy MG
Screen size: Each set of OTD50 have 2 screens ]]></description><pubDate><![CDATA[20221107]]></pubDate></item>
<item>
<title><![CDATA[TBC-50 Multi-Purpose Cutter]]></title><link><![CDATA[https://royalpack.en.ec21.com/TBC_50_Multi_Purpose_Cutter--1614280_11315573.html]]></link><description><![CDATA[50mm) in length
4. All electric microprocessor controlled
5. Automatic shut off - stops automaticallyy if material runs out during operation
6. Easy to use - set length, quantity and feed speed; then]]></description><pubDate><![CDATA[20210205]]></pubDate></item>
<item>
<title><![CDATA[Open Mill and Refiner  XK550  XK400  XK660 XKJ-480]]></title><link><![CDATA[https://bjod.en.ec21.com/Open_Mill_and_Refiner_XK550--2032429_1894669.html]]></link><description><![CDATA[off - a way of braking rolls no more than 0.25 revolutions roll (90 &amp;deg;) with simultaneous tap(removal) forward roll on distance not less than 25 mm. 
Overall size
About L4900 x W2450 x H1900mm
Wei]]></description><pubDate><![CDATA[20150414]]></pubDate></item>
<item>
<title><![CDATA[Ultrasonic Cleaner for Jewellery]]></title><link><![CDATA[https://tony490.en.ec21.com/Ultrasonic_Cleaner_for_Jewellery--2518940_2464435.html]]></link><description><![CDATA[Ultrasonic Frequency:42,000 Hz 
Tank Material:Stainless Steel SUS303 
Tank Capacity:600 ml ( 1 pint ) 
Timer:3-minute Automatic Cut-off 
Power Supply 
AC 100 ~ 120V, 50 / 60Hz 
AC 220 ~ 240V, 50 / 60]]></description><pubDate><![CDATA[20140402]]></pubDate></item>
<item>
<title><![CDATA[SRA+VE     Series]]></title><link><![CDATA[https://tjfreya.en.ec21.com/SRA_VE_Series--9613629_9613844.html]]></link><description><![CDATA[off control can realize &amp;lsquo;remain&amp;rsquo; or &amp;lsquo;inching&amp;rsquo; mode control through outside wires connections.
3.Distant current control(also called distant automatic control):
User can contro]]></description><pubDate><![CDATA[20150731]]></pubDate></item>
<item>
<title><![CDATA[R-8051/R-8051+ 16-Channel Isolated Digital Input Module]]></title><link><![CDATA[https://jane2015gemotech.en.ec21.com/R_8051_R_8051_16--10081766_10082088.html]]></link><description><![CDATA[Main Features 
- Input: 16-channel 
- Input Voltage: 50V (Maximum) 
- Input Voltage Level: 
Dry Contact: Logic Level 0:-OFF (close to GND); Logic Level 1:-ON; 
Wet Contact: Logic Level 0: +3V (Maximu]]></description><pubDate><![CDATA[20160727]]></pubDate></item>
<item>
<title><![CDATA[Multi-Functional Water Circulating Vacuum Pump]]></title><link><![CDATA[https://xataikang.en.ec21.com/Multi_Functional_Water_Circulating_Vacuum--9935656_9936726.html]]></link><description><![CDATA[off and on at any side. 
Features: 
(1) Adopts the double-tap, alone or in parallel with two vacuum tables. 
(2) The latest improved anti-corrosion four taps can be used alone or in parallel with fou]]></description><pubDate><![CDATA[20170216]]></pubDate></item>
<item>
<title><![CDATA[Machine To Cut Herbs,Tobacco Cutting Machine]]></title><link><![CDATA[https://primatech1.en.ec21.com/Machine_To_Cut_Herbs_Tobacco--4627455_5489770.html]]></link><description><![CDATA[off by several rotate knives.
Machine can cut leafs or leafs with a stem. You don&amp;#39;t have to change the machine you CHANGE ONLY THE NUMBER OF KNIVES. Eight knives is for cutting leaf with a steam,]]></description><pubDate><![CDATA[20170410]]></pubDate></item>
<item>
<title><![CDATA[Mobile Trailer Vacuum Transformer Oil Purifier Equipment, Movable Insulation Oil Filtration Unit]]></title><link><![CDATA[https://zhongneng123.en.ec21.com/Mobile_Trailer_Vacuum_Transformer_Oil--4454862_4558467.html]]></link><description><![CDATA[off automatically.
Technical Parameters:
ParametersUnitZYM-6ZYM-10ZYM-20ZYM-30ZYM-50ZYM-100ZYM-150ZYM-200ZYM-300Flow rateL/h360600120018003000600090001200018000Vacuum degreeMPa-0.06~-0.095Working pre]]></description><pubDate><![CDATA[20221218]]></pubDate></item>
<item>
<title><![CDATA[industrial Chiller,Cooling Thermsotat / Bath]]></title><link><![CDATA[https://wxpca001.en.ec21.com/industrial_Chiller_Cooling_Thermsotat_Bath--5675435_5691821.html]]></link><description><![CDATA[50L
500L
750L
1000L
Expansion Tank (standard)
100L
175L
250L
350L
500L
Compressor
Standard: Copeland 
Optional: BOCK piston compressor
Operation Panel
7-inch color touch screen display, temperature c]]></description><pubDate><![CDATA[20180619]]></pubDate></item>
<item>
<title><![CDATA[Seat Type Adjustable Welding Positioner]]></title><link><![CDATA[https://huafeicncmachine.en.ec21.com/Seat_Type_Adjustable_Welding_Positioner--6597753_6597832.html]]></link><description><![CDATA[500
Height of work table（mm）
1000
1250
1250
1600
1600
1800
1800
2100
2300
2600
Allow work
piece
off-center
（mm）
Eccentricity
150
200
200
200
200
200
200
200
200
200
Centroidal distance
200
25]]></description><pubDate><![CDATA[20130117]]></pubDate></item>
<item>
<title><![CDATA[IGBT Air Plasma Cutting Machine]]></title><link><![CDATA[https://18483658453ym.en.ec21.com/IGBT_Air_Plasma_Cutting_Machine--10594557_11498980.html]]></link><description><![CDATA[off
■
Stable welding can be realized over classified optimization, absorption,
shielding and venting of HF interference signals
■ Can cut mild steel, stainless
steel, alloy steel, aluminum and it]]></description><pubDate><![CDATA[20211227]]></pubDate></item>
<item>
<title><![CDATA[Various Machinery]]></title><link><![CDATA[https://karam2013.en.ec21.com/Various_Machinery--7705814_7713514.html]]></link><description><![CDATA[Detail Images
Slitting Line for Cut the plate coils
Bead Rolling machine
In-let table
Out-let table
Cutting machine
Shearing machine
Square tube mill(off line type)
Specification
Model
KR-SQ-50 
KR-S]]></description><pubDate><![CDATA[20130710]]></pubDate></item>

</channel>
</rss>