<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - air compress]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/air_compress--2673/1/air compress.html]]></link><item>
<title><![CDATA[Compressed Air Water Remover - WELL AIR]]></title><link><![CDATA[https://wonsan991018.en.ec21.com/Compressed_Air_Water_Remover_WELL--10628485_10628500.html]]></link><description><![CDATA[Compressed Air Water Remover &quot;WELL AIR&quot; 
No Filters
No Maintenance
No Power Supply
Water removal efficiency : 99.9%
No CFC gases
As much as 99.9% of water is removed from the inside of air tubes by o]]></description><pubDate><![CDATA[20210203]]></pubDate></item>
<item>
<title><![CDATA[Water Hammer Arrester]]></title><link><![CDATA[https://gtijames7.en.ec21.com/Water_Hammer_Arrester--12064232_12064233.html]]></link><description><![CDATA[compressible Liquid) flowing at a given pressure and velocity causes a surge or spike of water and is called water hammer. When this occurs, 
a pressure wave travels back through the piping until it ]]></description><pubDate><![CDATA[20251210]]></pubDate></item>
<item>
<title><![CDATA[ELECTRONIC HAMMER SYSTEM  Electric Vibration &amp; Impact Device for Hopper &amp; Silo Flow Aid]]></title><link><![CDATA[https://fascoeng.en.ec21.com/ELECTRONIC_HAMMER_SYSTEM_Electric_Vibration--12063119_12063120.html]]></link><description><![CDATA[compressed air, ensuring stable and efficient material discharge.
It replaces traditional air knockers, magnet hammers, and mechanical vibrators with precise control of impact frequency (20–60 Hz) ]]></description><pubDate><![CDATA[20251113]]></pubDate></item>
<item>
<title><![CDATA[GT-ASCT19 Auto Coil Tube Straightening and Cutting Machine]]></title><link><![CDATA[https://greaterheating.en.ec21.com/GT_ASCT19_Auto_Coil_Tube--12048833_12049944.html]]></link><description><![CDATA[Air supply: 0.4-0.8Mpa clean compressed air;
Information need for order GT-ASCT19 auto coil tube straightening and cutting machine:
Tube diameter to cut
Length to cut
Electrical supply (for example, ]]></description><pubDate><![CDATA[20250318]]></pubDate></item>
<item>
<title><![CDATA[GOANWIN GPH H-Frame High Speed Press for Motor Stators and Rotors]]></title><link><![CDATA[https://goanwin.en.ec21.com/GOANWIN_GPH_H_Frame_High--12040893_12041073.html]]></link><description><![CDATA[compressed using hydraulic power to enhance structural integrity.
2.Precision Stamping
Non-clearance axial bearings paired with extended guide cylinders ensure superior dynamic and static accuracy.
D]]></description><pubDate><![CDATA[20250202]]></pubDate></item>
<item>
<title><![CDATA[3-20LPM Oxygen Generator]]></title><link><![CDATA[https://qjozonetech.en.ec21.com/3_20LPM_Oxygen_Generator--11938412_12036992.html]]></link><description><![CDATA[air compressor, etc.
● Under humidity is about 60-80%, Refrigerated dryer is necessary to dry the hot compressed air which pumps into oxygen bed, to protect oxygen life time.
● Control: Ammeter, ]]></description><pubDate><![CDATA[20250115]]></pubDate></item>
<item>
<title><![CDATA[1.6M Automatic Ultrasonic Fabric Laminating Machine(NK-JM2012-1600)]]></title><link><![CDATA[https://nekonultrasonics.en.ec21.com/1.6M_Automatic_Ultrasonic_Fabric_Laminating--12031083_12031087.html]]></link><description><![CDATA[Air source
compressed air (5MPA)
Frame material
Frame adopts section steel pass welded structure
Ultrasonic system
(20K 1.2KW eight sets)
System control
PLC
Capacity
0-12 m/min
Starting mode
PLC comp]]></description><pubDate><![CDATA[20241213]]></pubDate></item>
<item>
<title><![CDATA[Square Battery Cell Tail Taping Into the Shell Machine]]></title><link><![CDATA[https://sidasi999.en.ec21.com/Square_Battery_Cell_Tail_Taping--9456505_11185371.html]]></link><description><![CDATA[time (MIN)/shift
30
Product pass rate
99.8%
Rate of grain or move
95%
Product model replacement time
30min
Compressed air system
0.4-0.6MPa
The
total power（kw)
8
Normal operating power（kw)
7.6
]]></description><pubDate><![CDATA[20241105]]></pubDate></item>
<item>
<title><![CDATA[Differential Air Shaft]]></title><link><![CDATA[https://huiyuan168.en.ec21.com/Differential_Air_Shaft--10585119_10585120.html]]></link><description><![CDATA[compressed air.
The differential shaft is structure by the mandrel and multiple sets of friction rings (differential rings).The friction ring can independent sliding,torque is controlled in central p]]></description><pubDate><![CDATA[20241023]]></pubDate></item>
<item>
<title><![CDATA[Vacuum Brazing Furnace]]></title><link><![CDATA[https://und24.en.ec21.com/Vacuum_Brazing_Furnace--12009016_12009027.html]]></link><description><![CDATA[compressed air to pneumatic actuators such as cylinders, charging valves, vacuum valves, etc.
7. Inflatable pressure distribution system: It consists of a large-caliber pneumatic stop valve, a manual]]></description><pubDate><![CDATA[20240924]]></pubDate></item>
<item>
<title><![CDATA[75*60*25mm Ball Type Differential Air Shaft Ring]]></title><link><![CDATA[https://dgsynectics.en.ec21.com/75_60_25mm_Ball_Type--11970403_11974272.html]]></link><description><![CDATA[Ball type Air differential shaft 3&apos;&apos;outer diameter:φ75 Expand diameter:φ78mm1)Applicable tube ID:φ76±0.2mm2)Inside diameter(ID):φ60mm3)Standard width:25mmCan form central pressure type,pneumatic]]></description><pubDate><![CDATA[20240724]]></pubDate></item>
<item>
<title><![CDATA[Construction of Manual Wire Threading Machine]]></title><link><![CDATA[https://dingniumachines.en.ec21.com/Construction_of_Manual_Wire_Threading--11072925_11072947.html]]></link><description><![CDATA[air-cooled by the exhaust welder.
5. Manual placement of diameter wire, automatic shedding of weft wire.
6. Holes of different sizes can appear on the same web.
7. Adjustable diameter wire hole spaci]]></description><pubDate><![CDATA[20240712]]></pubDate></item>
<item>
<title><![CDATA[ND-1 Portable Rail Tamper]]></title><link><![CDATA[https://linkagez.en.ec21.com/ND_1_Portable_Rail_Tamper--11967036_11967074.html]]></link><description><![CDATA[air compression hammer impact pick is used to impact the ballat. The impact force is large and the tamping effect is good. The whole machin is smal in size, ight. in. weight, and convenient. to go up]]></description><pubDate><![CDATA[20240711]]></pubDate></item>
<item>
<title><![CDATA[Atmospheric Plasma Cleaning System Chain Conveyor]]></title><link><![CDATA[https://atvplasma.en.ec21.com/Atmospheric_Plasma_Cleaning_System_Chain--11960396_11963494.html]]></link><description><![CDATA[compressed air; optional argon, nitrogen, etc.
7.Effective processing width Width 500mm, double-sided processing (optional), the number of rotating nozzles is optional
8.Rotating spray gun Processing]]></description><pubDate><![CDATA[20240705]]></pubDate></item>
<item>
<title><![CDATA[Auto Coil Tube Straightening and Cutting Machine Tube Cutting Machine]]></title><link><![CDATA[https://greatertech.en.ec21.com/Auto_Coil_Tube_Straightening_and--11934609_11934621.html]]></link><description><![CDATA[Air supply: 0.4-0.8Mpa clean compressed air;
Information need for order GT-ASCT19 auto coil tube straightening and cutting machine:
Tube diameter to cutLength to cutElectrical supply (for example, 1 ]]></description><pubDate><![CDATA[20240628]]></pubDate></item>
<item>
<title><![CDATA[Industrial Blowers]]></title><link><![CDATA[https://bernyeangroup.en.ec21.com/Industrial_Blowers--11954360_11954361.html]]></link><description><![CDATA[compressed air technology can be significantly enhanced. Implementing these strategies can lead to more reliable, efficient, and cost-effective operations.
Roots blowers
are a crucial component in th]]></description><pubDate><![CDATA[20240620]]></pubDate></item>
<item>
<title><![CDATA[Semi-Automatic KN95/N95 Mask Making Machine]]></title><link><![CDATA[https://maggie1234567.en.ec21.com/Semi_Automatic_KN95_N95_Mask--11929351_11929417.html]]></link><description><![CDATA[Compressed air Pressure:0.5mpaSize:1000*600*1500 kN95 mask edge banding machine:KN95/N95 mask edge banding machine:Application:1.Using ultrasonic welding, avoid needle thread, save the trouble of fre]]></description><pubDate><![CDATA[20240606]]></pubDate></item>
<item>
<title><![CDATA[Hepa Filter PU Dosing Gluing Machine]]></title><link><![CDATA[https://xd5358840.en.ec21.com/Hepa_Filter_PU_Dosing_Gluing--6307152_10814791.html]]></link><description><![CDATA[compressed air, Automatic mode only need to operate the cleaning switch ontouch screen within 1 minute to complete;12. Glue tank/metering pump/glue pipe heating function (optional);13. Vacuum control]]></description><pubDate><![CDATA[20240530]]></pubDate></item>
<item>
<title><![CDATA[Honeycomb Paperboard Slitting Machine]]></title><link><![CDATA[https://sanmachinery2021.en.ec21.com/Honeycomb_Paperboard_Slitting_Machine--11865862_11865878.html]]></link><description><![CDATA[compressed air
0.7Mpa
Advantages of Honeycomb Paperboard Slitting Machine
Honeycomb paperboard machine is an equipment for manufacturing honeycomb cardboard. Honeycomb cardboard has a wide range of u]]></description><pubDate><![CDATA[20231113]]></pubDate></item>
<item>
<title><![CDATA[SCM3000 M2M Chip Personalization Machine]]></title><link><![CDATA[https://piotecglobal.en.ec21.com/SCM3000_M2M_Chip_Personalization_Machine--11883003_11883028.html]]></link><description><![CDATA[Compressed Air
stress: 0.5Mpa Flow rate: 300LPM
Communication Interface
Ethernet
Fuctions of SCM3000 M2M Chip Personalising Machine
PARAMETER
Input Module
1. Tray Input: up to 20pcs of trays can be l]]></description><pubDate><![CDATA[20240103]]></pubDate></item>
<item>
<title><![CDATA[Professional Stamping Metal Molds]]></title><link><![CDATA[https://sunbright1.en.ec21.com/Professional_Stamping_Metal_Molds--11600736_11696197.html]]></link><description><![CDATA[1.Product Introduction
Metal stamping is a relatively simple process where rolled or sheet metal. It is placed in a press that has a die in the desired shape of the part. 
With force and compression,]]></description><pubDate><![CDATA[20221221]]></pubDate></item>
<item>
<title><![CDATA[High Low Temperature/ Low Air Pressure Test Chamber]]></title><link><![CDATA[https://lilyviyo12345.en.ec21.com/High_Low_Temperature_Low_Air--11853101_11853630.html]]></link><description><![CDATA[compression, two-stage refrigeration, International
well-known brand compressor
Refrigerant
R404A/R23
Cooling mode
Air cooling or water cooling (According to
customer’s requirements) 
Control syste]]></description><pubDate><![CDATA[20231013]]></pubDate></item>
<item>
<title><![CDATA[CNC Machining Nylon]]></title><link><![CDATA[https://flourishlegend.en.ec21.com/CNC_Machining_Nylon--11858161_11858176.html]]></link><description><![CDATA[compressive strength changes with temperature and moisture absorption, so water is relatively a plasticizer for PA. After adding glass fiber, its tensile and compressive strength can be improved Abou]]></description><pubDate><![CDATA[20231024]]></pubDate></item>
<item>
<title><![CDATA[SMC Oil Tank Mould]]></title><link><![CDATA[https://fql254.en.ec21.com/SMC_Oil_Tank_Mould--11597141_11721833.html]]></link><description><![CDATA[Compression molded fiberglass parts are characterized by net size and shape, two excellent finished surfaces, and outstanding parts-to-part repeatability. Trimming and finishing costs are minimal.
In]]></description><pubDate><![CDATA[20230206]]></pubDate></item>
<item>
<title><![CDATA[China Hoper Manufacturer]]></title><link><![CDATA[https://hongxinagio.en.ec21.com/China_Hoper_Manufacturer--11909508_11910305.html]]></link><description><![CDATA[compressed air can be used to clean pipelines in the silo hopper to prevent accidents.
HongXin Auto Hopper Classification:
1. Classified by purpose: it can be divided into raw material warehouse, tra]]></description><pubDate><![CDATA[20240310]]></pubDate></item>
<item>
<title><![CDATA[Enviclone Photovoltaic Pv Module Solar Panel Wind Resistance Dynamic Mechanical Load Test Machine]]></title><link><![CDATA[https://enviclonetestchamber.en.ec21.com/Enviclone_Photovoltaic_Pv_Module_Solar--11887754_11887755.html]]></link><description><![CDATA[Air Compressed
Load Amplitude Test Range (Static)
Pressure: +500~12,000 Pa (Continuous, adjustable)
Suction: -500 ~ -7,200 Pa (Continuous, adjustable) Note: The test time and pressures can be adjuste]]></description><pubDate><![CDATA[20240113]]></pubDate></item>
<item>
<title><![CDATA[Fully Automatic Solar Laminator]]></title><link><![CDATA[https://solarlaminator.en.ec21.com/Fully_Automatic_Solar_Laminator--11768127_11843811.html]]></link><description><![CDATA[Compressed Air Pressure
0.6MPa—0.8MPa
Fully Automatic Solar Module Laminator Advantages
Improved Efficiency: Fully automatic solar module laminators are designed to operate continuously without int]]></description><pubDate><![CDATA[20230912]]></pubDate></item>
<item>
<title><![CDATA[TZ1600-100 Food Grade High-Speed Coating Line]]></title><link><![CDATA[https://ltcoatingline.en.ec21.com/TZ1600_100_Food_Grade_High--11449505_11512206.html]]></link><description><![CDATA[Compressed air:
Min5.5bar, 1Nm3/min, actual consumption 0.5Nm3/min
Water:
Deionized water, supply quantity is about 4T/h
Heating fuel:
LPG or LNG
LPG consumption:
0.2 CBM/min
LNG consumption:
0.4 CBM]]></description><pubDate><![CDATA[20220118]]></pubDate></item>
<item>
<title><![CDATA[Dry Ice Cleaning Machine Dry Ice Blaster Dry Ice Blasting Machine]]></title><link><![CDATA[https://wmmachinery.en.ec21.com/Dry_Ice_Cleaning_Machine_Dry--11537767_11538530.html]]></link><description><![CDATA[compressed air reduces the probability of ice blockage in the injection process.
Exquisite appearance design to improve the professionalism and beauty of the workshop.
The Dry Ice Cleaning does not c]]></description><pubDate><![CDATA[20220304]]></pubDate></item>
<item>
<title><![CDATA[DRC-D51K CNC Vertical Ring Rolling Machine]]></title><link><![CDATA[https://youli798.en.ec21.com/DRC_D51K_CNC_Vertical_Ring--11873476_11873477.html]]></link><description><![CDATA[compressed air through the muffler to eliminate noise pollution.
8.The rolling wheel is fixed by expanding ring, and the axial positioning precision is high, which can simplify the machining.
]]></description><pubDate><![CDATA[20240109]]></pubDate></item>
<item>
<title><![CDATA[Hydraulics Press Machine 4000T with CE/Nr Standard]]></title><link><![CDATA[https://tttinaliu2023.en.ec21.com/Hydraulics_Press_Machine_4000T_with--11753707_11753727.html]]></link><description><![CDATA[Compression moulding of SMC sheet (glass fibre reinforced plastic)B. Auto industry: Steel ring, vehicle body, chasis, axle housing, oil tank, door, etc.C. Home electric appliance industry: Components]]></description><pubDate><![CDATA[20230424]]></pubDate></item>
<item>
<title><![CDATA[Aozeesolar Pv Module Vacuum Laminator for PERC/HJT/HIT/IBC Solar Panel Experiment 400*500mm]]></title><link><![CDATA[https://aozeesolar2023.en.ec21.com/Aozeesolar_Pv_Module_Vacuum_Laminator--11834791_11834801.html]]></link><description><![CDATA[Air discharge speedCan adjust continuously within 0～50L/S
Press of compressed air
0.5～0.8MPaLaminate timeabout 15min.
Pumping time
4～5minCompressed air speed1-8L/S
Work vacuum degree
80～20PaA]]></description><pubDate><![CDATA[20231128]]></pubDate></item>
<item>
<title><![CDATA[Water Cooled Chiller Excellent Cooling Chiller 5HP R22/R407C Injection Plastic Chiller]]></title><link><![CDATA[https://xinbangltd.en.ec21.com/Water_Cooled_Chiller_Excellent_Cooling--11910358_11913344.html]]></link><description><![CDATA[Compressor, Evaporator, Condenser
Place of Origin
Guangdong, China
Weight
175 KG
Warranty
1 Year
Key Selling Points
Excellent Cooling
Condition
New
Type
Air-cooled
Brand Name
xinbang
Voltage
3PH-380V]]></description><pubDate><![CDATA[20240319]]></pubDate></item>
<item>
<title><![CDATA[AB System]]></title><link><![CDATA[https://shnuben2023.en.ec21.com/AB_System--11748549_11748643.html]]></link><description><![CDATA[Air cleaning filter, ABS Enclosure Junction Box, ventilation cover, Explosion-proof light, Outdoor Lights, Street lighting, Stadium lighting, Brake lights, LED luminaire, Lighting fitting, Transforme]]></description><pubDate><![CDATA[20230315]]></pubDate></item>
<item>
<title><![CDATA[Professional Manufacturer for High Temperature Nitrogen Protective Metal Wire Electricity Annealing]]></title><link><![CDATA[https://tinacsun.en.ec21.com/Professional_Manufacturer_for_High_Temperature--11886196_11886473.html]]></link><description><![CDATA[compression amount is 35~40%), and use a special ceramic screw, that is, a ceramic self-tapping screw and a ceramic gasket, which can quickly and conveniently The belt is fixed on the furnace wall. T]]></description><pubDate><![CDATA[20240110]]></pubDate></item>
<item>
<title><![CDATA[Temperature Chamber]]></title><link><![CDATA[https://libtest.en.ec21.com/Temperature_Chamber--11857760_11857762.html]]></link><description><![CDATA[air pressure and other environmental conditions. A variety of comprehensive environments can meet the diverse testing requirements of customers.
4. There are standard products and customized products]]></description><pubDate><![CDATA[20231023]]></pubDate></item>
<item>
<title><![CDATA[Practical Stencil Cleaning Machine Multipurpose Fully Pneumatic]]></title><link><![CDATA[https://stencilcleaning.en.ec21.com/Practical_Stencil_Cleaning_Machine_Multipurpose--11860242_11860243.html]]></link><description><![CDATA[compressed air to drive a diaphragm pump, allowing for the recycling of the cleaning solution inside the machine, which achieves zero discharge of the cleaning agent. This machine effectively cleans ]]></description><pubDate><![CDATA[20231030]]></pubDate></item>
<item>
<title><![CDATA[Filter Elements &amp; Filter Cartridge for Sale]]></title><link><![CDATA[https://paier.en.ec21.com/Filter_Elements_Filter_Cartridge_for--11744725_11806337.html]]></link><description><![CDATA[compressed air, and gas filtration, to remove contaminants from liquids and gases used in drug manufacturing and packaging.
Others: electroplating solution, metal cutting fluid, photosensitive resist]]></description><pubDate><![CDATA[20230614]]></pubDate></item>
<item>
<title><![CDATA[Air Booster Tank]]></title><link><![CDATA[https://suncenterbooster.en.ec21.com/Air_Booster_Tank--11710813_11807964.html]]></link><description><![CDATA[https://www.suncenterbooster.com/products/air-pressure-booster-with-40l-air-tanks.html
Air Booster Tank
An air booster tank is a device that is used to increase the pressure of compressed air. It con]]></description><pubDate><![CDATA[20230617]]></pubDate></item>
<item>
<title><![CDATA[AC Hose Manufacturer]]></title><link><![CDATA[https://sanyeflex.en.ec21.com/AC_Hose_Manufacturer--11786238_11851257.html]]></link><description><![CDATA[air-conditioning systems of various vehicles (cars, machinery, trains, trams) as well as in smaller installations of industrial cooling. In these installations, freonmixed with compressor oil acts as]]></description><pubDate><![CDATA[20231007]]></pubDate></item>
<item>
<title><![CDATA[Professional Pressure Sandblasting Booth 1500mm CBBK-2000 Sandblasting Machine Special Price, Premiu]]></title><link><![CDATA[https://starpaintindustries.en.ec21.com/Professional_Pressure_Sandblasting_Booth_1500mm--11592005_11672272.html]]></link><description><![CDATA[compressed air lines.3. Continuous dry air supply of 6 bar 2 m³/h for the blasting system.4. Providing the necessary sand for the sandblasting process⚙️ Warranty:1. The warranty period is 1 year]]></description><pubDate><![CDATA[20230504]]></pubDate></item>
<item>
<title><![CDATA[Hydrocarbon R290 Refrigerant Charging Machine Flammable Filling Equipment]]></title><link><![CDATA[https://refrigerantcharging.en.ec21.com/Hydrocarbon_R290_Refrigerant_Charging_Machine--11906723_11906724.html]]></link><description><![CDATA[Compressed Air0.5-0.7MpaPLC SiemensPower Supply380V 50Hz 3Ph/220V 50HZ 1PhApproved RefrigerantsR600a,R290,R32,R1234ze,R1234YF,R134AApplicationAir Condition,Water Cooler,Beer Machine,Freezers, Refrige]]></description><pubDate><![CDATA[20240227]]></pubDate></item>
<item>
<title><![CDATA[SHSJz Series Stainless Steel Double Shaft High Efficiency Mixer]]></title><link><![CDATA[https://jiangsuliangyou.en.ec21.com/SHSJz_Series_Stainless_Steel_Double--11477685_11602024.html]]></link><description><![CDATA[air system ensures stable air flow during all-round feeding;
■ Access door with safety lock for easy cleaning and maintenance;
■ Customers can choose compressed air cleaning system to minimize th]]></description><pubDate><![CDATA[20220713]]></pubDate></item>
<item>
<title><![CDATA[EPS Shape Moulding Machine for Lost Foam Casting]]></title><link><![CDATA[https://roielfc.en.ec21.com/EPS_Shape_Moulding_Machine_for--11838013_11838014.html]]></link><description><![CDATA[compressed air.
Using an EPS shape moulding machine for lost foam casting allows for the production of complex and intricate metal parts with high precision and minimal post-casting machining. The lo]]></description><pubDate><![CDATA[20230825]]></pubDate></item>
<item>
<title><![CDATA[Shale Gas Compressor for Shale Gas Extraction]]></title><link><![CDATA[https://dynamic59.en.ec21.com/Shale_Gas_Compressor_for_Shale--11842177_11842195.html]]></link><description><![CDATA[air ends guarantee Smooth operation at low maintenance and high reliability2. Variable speed drive control systemsShale gas Compressor for Shale gas ExtractionScrew compressors are very cost-effectiv]]></description><pubDate><![CDATA[20230907]]></pubDate></item>
<item>
<title><![CDATA[Metal Can/Tin/Container Labeling Machine]]></title><link><![CDATA[https://ymy3562.en.ec21.com/Metal_Can_Tin_Container_Labeling--3976435_5565882.html]]></link><description><![CDATA[Hot melt glue + Cold Glue
Power : three-phase 380V (or on request) 
Electric power 2.62Kw 
Compressed air 2-4Kg/m2, 10 L/ min 
Overall dimension 1855mm &amp;times; 750mm &amp;times; 1250mm 
Weight 650Kg
]]></description><pubDate><![CDATA[20160103]]></pubDate></item>
<item>
<title><![CDATA[SF6 Recovery and Gas Refilling Device]]></title><link><![CDATA[https://cqhnjtgs.en.ec21.com/SF6_Recovery_and_Gas_Refilling--495772_1301900.html]]></link><description><![CDATA[air compressor, bumper, separator, filter, heat exchanger, safety valve, one-way valve, gas pressure gauge, vacuum gauge, and freezer; 
L. Vacuum system 
It is composed of vacuum pump , vacuum gauge(]]></description><pubDate><![CDATA[20151203]]></pubDate></item>
<item>
<title><![CDATA[Ultrasonic Washer for Fruits and Vegetables]]></title><link><![CDATA[https://enputech.en.ec21.com/Ultrasonic_Washer_for_Fruits_and--1546859_2175445.html]]></link><description><![CDATA[compression waves in the water, which tear the liquid apart, leaving behind many millions of &amp;lsquo;microscopic voids or partial vacuum bubbles&amp;rsquo; (Cavitation). These bubbles collapse with enormo]]></description><pubDate><![CDATA[20130405]]></pubDate></item>
<item>
<title><![CDATA[Automatic Mold Taping Machine]]></title><link><![CDATA[https://sambocmt.en.ec21.com/Automatic_Mold_Taping_Machine--912574_912599.html]]></link><description><![CDATA[Compressed Air: 5 Bar (Oil &amp; Moisture free)
Dimension
-TPM2000: 870mm x 850mm x 2160mm (W x L X H)
-ATM1000: 883mm x 865mm x 2160mm (W x L X H)
Thickness Measuring Equipment Type CTM-1000 
The equipm]]></description><pubDate><![CDATA[20050801]]></pubDate></item>
<item>
<title><![CDATA[Industrial Perfume Extraction Machine]]></title><link><![CDATA[https://jnban733.en.ec21.com/Industrial_Perfume_Extraction_Machine--11591484_11785803.html]]></link><description><![CDATA[Compressed air pressure (MPA)
0.3
0.3
0.3
0.3
0.3
0.3
Feed port diameter (mm)
400
400
400
500
500
500
Heating area (m²)
3.0
4.7
6.0
7.5
9.5
12
Condensation area (m²)
4
4
5
5
8
10
Coling area (m²)
]]></description><pubDate><![CDATA[20230509]]></pubDate></item>

</channel>
</rss>