<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - back pressure]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/back_pressure--2673/1/back pressure.html]]></link><item>
<title><![CDATA[Water Hammer Arrester]]></title><link><![CDATA[https://gtijames7.en.ec21.com/Water_Hammer_Arrester--12064232_12064233.html]]></link><description><![CDATA[pressure and velocity causes a surge or spike of water and is called water hammer. When this occurs, 
a pressure wave travels back through the piping until it finds a point of relief. 
The water hamm]]></description><pubDate><![CDATA[20251210]]></pubDate></item>
<item>
<title><![CDATA[Waterproof,High-speed and Heavy-duty Back-up Roll for Tension Leverler]]></title><link><![CDATA[https://asconone.en.ec21.com/Waterproof_High_speed_and_Heavy--11987900_12030954.html]]></link><description><![CDATA[back up roll be composed of mandrel, bearing sleeve, needle roller, seal, fastener, heat-resistant extreme pressure grease, and the heat treatment hardness, material selection, clearance fit, assembl]]></description><pubDate><![CDATA[20250729]]></pubDate></item>
<item>
<title><![CDATA[Explosion Proof Digital Camera for Oil and Gas]]></title><link><![CDATA[https://xuxin1.en.ec21.com/Explosion_Proof_Digital_Camera_for--12053528_12053529.html]]></link><description><![CDATA[pressure
80 kPa～106kPa
Storage temperature
-40℃～+60℃
Place of use
Can be used in Zone 1 and Zone 2, Class IIA, IIB, IIC gas environments, and can also be used in combustible dust environments]]></description><pubDate><![CDATA[20250401]]></pubDate></item>
<item>
<title><![CDATA[LIFENG Material Technology-Finned Tubes]]></title><link><![CDATA[https://lifeng006.en.ec21.com/LIFENG_Material_Technology_Finned_Tubes--10119108_10119193.html]]></link><description><![CDATA[pressure of the foot of the fin onto the base tube thus maximising the heat transfer properties. The foot of the fin considerably enhances the corrosion protection of the base tube.
&apos;LL&apos; Finned Tube ]]></description><pubDate><![CDATA[20250306]]></pubDate></item>
<item>
<title><![CDATA[Fully Automatic Bikini Period Pants Customized]]></title><link><![CDATA[https://womeng.en.ec21.com/Fully_Automatic_Bikini_Period_Pants--12045712_12045723.html]]></link><description><![CDATA[pressure
0.6-0.8Mpa (Air compressor needs to be prepared by customers)
Machine weight
90 Tons approximately
FAQ 
Q1: Why choose our machine? A: 1.we are professional diaper machine
factory with high ]]></description><pubDate><![CDATA[20250228]]></pubDate></item>
<item>
<title><![CDATA[Plasma Gas Combustion Cathode]]></title><link><![CDATA[https://reframetals.en.ec21.com/Plasma_Gas_Combustion_Cathode--12016380_12041522.html]]></link><description><![CDATA[back-cast electrode structure is highly stable, allowing it to withstand the high-temperature and high-pressure conditions of plasma gas combustion while maintaining excellent stability to ensure a c]]></description><pubDate><![CDATA[20250206]]></pubDate></item>
<item>
<title><![CDATA[Concrete Pole Machine,Concrete Pole,Concrete Pole Production Line]]></title><link><![CDATA[https://hopeland2010.en.ec21.com/Concrete_Pole_Machine_Concrete_Pole--4261220_9726473.html]]></link><description><![CDATA[pressure gun for mould closing
30
14
Air compressor 10m3
2
15
Mixing station
2
16
Material supply vehicle
4
17
10T Double beam traveling crane
2
18
5T Double beam traveling crane
1
19
Curing pool (br]]></description><pubDate><![CDATA[20241113]]></pubDate></item>
<item>
<title><![CDATA[A/AM-Sries(Air Cooled Chiller )]]></title><link><![CDATA[https://cooler7777.en.ec21.com/A_AM_Sries_Air_Cooled--9249334_9257186.html]]></link><description><![CDATA[pressure is too high or low (Stop working automatically)
Sense gas leaking
Protecting for Over-Current
Built-in circuit for inversion prevention and electricity detection
Preventing excessive cold wa]]></description><pubDate><![CDATA[20241105]]></pubDate></item>
<item>
<title><![CDATA[Vacuum Sintering Furnace]]></title><link><![CDATA[https://und24.en.ec21.com/Vacuum_Sintering_Furnace--12009016_12009018.html]]></link><description><![CDATA[pressure inert gas to accelerate the cooling speed. 
3. Maximum operating temperature: 1800℃, 2500℃, working atmosphere: hydrogen, nitrogen, inert gas or high vacuum state (induction heating tung]]></description><pubDate><![CDATA[20240924]]></pubDate></item>
<item>
<title><![CDATA[High-Volume Vertical Plasma System AV-P30]]></title><link><![CDATA[https://atvplasma.en.ec21.com/High_Volume_Vertical_Plasma_System--11960396_11960397.html]]></link><description><![CDATA[pressure protection, and circuit protection.
3.Optimized cooling channels guide cooling water in a regulated direction to ensure temperature uniformity and a long service cycle.
4.High cooling perfor]]></description><pubDate><![CDATA[20240701]]></pubDate></item>
<item>
<title><![CDATA[30k Cavitation Skin &amp; Body Care Machine]]></title><link><![CDATA[https://fgidj123456.en.ec21.com/30k_Cavitation_Skin_Body_Care--11953367_11953973.html]]></link><description><![CDATA[pressure created by low frequency ultrasound. Because the cell structure cannot withstand such pressure, the cell membranes quickly break down and the fat cells disintegrate. The dead fat cells are t]]></description><pubDate><![CDATA[20240619]]></pubDate></item>
<item>
<title><![CDATA[Acid Production System]]></title><link><![CDATA[https://remetalrecycling.en.ec21.com/Acid_Production_System--11943115_11943119.html]]></link><description><![CDATA[pressurized by rich liquid pump from the absorption tower and then enters the poor-rich liquid heat exchanger, which is regenerated by heat exchange with the hot poor liquid and then enters the regen]]></description><pubDate><![CDATA[20240527]]></pubDate></item>
<item>
<title><![CDATA[Mud Mixing Hopper]]></title><link><![CDATA[https://oilsolidscontrol.en.ec21.com/Mud_Mixing_Hopper--11942129_11942134.html]]></link><description><![CDATA[withstand high back pressure
For more information about jet mixing systems, please feel free to contact us!
There are many solid control companies
, but we are one of the best choices for you.
]]></description><pubDate><![CDATA[20240524]]></pubDate></item>
<item>
<title><![CDATA[Plastic &amp; Steel Conveyor Chains]]></title><link><![CDATA[https://saryeebelting.en.ec21.com/Plastic_Steel_Conveyor_Chains--11917985_11918069.html]]></link><description><![CDATA[Back Pressure (LBP) ChainsLBP chains are often designed to minimize the pressure applied to conveyed items. They are suitable for applications where products need to move smoothly without excessive f]]></description><pubDate><![CDATA[20240329]]></pubDate></item>
<item>
<title><![CDATA[1500W LightWelder Portable Laser Welding Machine]]></title><link><![CDATA[https://cmbio12.en.ec21.com/1500W_LightWelder_Portable_Laser_Welding--11774782_11775525.html]]></link><description><![CDATA[pressure:3 to 5 bar / 0.3 to 0.5 Mpa
Welding head weigt:0.8kg
Operation Voltage:Mini AC 200 to 240V 50/60 Hz
Laser cooling method:Phase change heat dissipation
Input Power:6kw
Cooling method of tip:I]]></description><pubDate><![CDATA[20240318]]></pubDate></item>
<item>
<title><![CDATA[Water Cooled Chiller Excellent Cooling Chiller 5HP R22/R407C Injection Plastic Chiller]]></title><link><![CDATA[https://xinbangltd.en.ec21.com/Water_Cooled_Chiller_Excellent_Cooling--11910358_11913344.html]]></link><description><![CDATA[pressure gauges, and more. These chiller units demonstrate excellent
performance and have a longer lifespan. Throughout the entire operating cycle,
a series of steps based on the fundamental principl]]></description><pubDate><![CDATA[20240319]]></pubDate></item>
<item>
<title><![CDATA[H Beam Shot Blasting Machine]]></title><link><![CDATA[https://shotblastpro.en.ec21.com/H_Beam_Shot_Blasting_Machine--11009215_11023758.html]]></link><description><![CDATA[pressure.
On the below of the screw conveyor has s manual emptying valve. If the screw conveyor is blocked, it can open the emptying valve to clear the abrasive that to run the machine as soon as pos]]></description><pubDate><![CDATA[20191031]]></pubDate></item>
<item>
<title><![CDATA[Hydraulic Liner Hanger Polished Bore Receptacle]]></title><link><![CDATA[https://saigaogroup.en.ec21.com/Hydraulic_Liner_Hanger_Polished_Bore--11093688_11181032.html]]></link><description><![CDATA[pressure ratings.
Technical Parameters of Hydraulic Liner Hanger Polished Bore Receptacle
Specifications, mm
Φ177.8
Φ127.0
Length, mm
1200
1200
I.D., mm
Φ187
Φ133
O.D., mm
Φ210
Φ145
Saigao Grou]]></description><pubDate><![CDATA[20200622]]></pubDate></item>
<item>
<title><![CDATA[YC Automatic 1.25M-1.5MM Steel Coil Slitting Line]]></title><link><![CDATA[https://metalrollingmach68.en.ec21.com/YC_Automatic_1.25M_1.5MM_Steel--10979436_11033931.html]]></link><description><![CDATA[pressure drives the level and landscape orientation movement
(3). Slitting machine
(11KW)
Drive system consists of drive stand, decelerator, 11KW motor, the gear distribution box, coupler, connection]]></description><pubDate><![CDATA[20200608]]></pubDate></item>
<item>
<title><![CDATA[Hydraulic Shearing Machine for (1 Degree To 2 Degrees and 30 Minutes)]]></title><link><![CDATA[https://ahmatw82619797.en.ec21.com/Hydraulic_Shearing_Machine_for_1--11176430_11176474.html]]></link><description><![CDATA[pressure vessel, ship, steel rolling, tractor and so on.
/SPECIFICATION/
- Type= Hydraulic Guillotine
- Strokes per Minute [S.P.M]= 5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 18, 20, 25, 30, 35
- Rake Angle]]></description><pubDate><![CDATA[20231109]]></pubDate></item>
<item>
<title><![CDATA[Automatic Stretching Machine]]></title><link><![CDATA[https://imscreenprinting.en.ec21.com/Automatic_Stretching_Machine--11396490_11432610.html]]></link><description><![CDATA[pressure chunk will clamp the mesh more tightly, the stretching process starts automatically. when stretching stopped, measure the tension, use accurate adjustment method if additional adjustments is]]></description><pubDate><![CDATA[20220215]]></pubDate></item>
<item>
<title><![CDATA[Cone Calorimeter, ISO5660, ASTM E1354]]></title><link><![CDATA[https://kobistq.en.ec21.com/Cone_Calorimeter_ISO5660_ASTM_E1354--1_3233195.html]]></link><description><![CDATA[pressure transducer). Normal operation is at a nominal 24 l/s. 
Gas Sampling - this comprises of a ring sampler, refrigerated cold trap, pump, drying columns and flow control. 
Oxygen Analysis - para]]></description><pubDate><![CDATA[20081012]]></pubDate></item>
<item>
<title><![CDATA[CNG Compressor (Model No. D-4824-250)]]></title><link><![CDATA[https://dynamic59.en.ec21.com/CNG_Compressor_Model_No._D--11842182_11842191.html]]></link><description><![CDATA[Basic Info.Model NO.D-48/24-250TypePistonPower SourceAC PowerConfigurationStationaryLubrication StyleLubricatedApplicationHigh Back Pressure TypeMuteNot MuteTrademarkDtechSpecificationISOOriginChinaH]]></description><pubDate><![CDATA[20231211]]></pubDate></item>
<item>
<title><![CDATA[Air Purge Type Level Transmitter (SLA)]]></title><link><![CDATA[https://seojinkt.en.ec21.com/Air_Purge_Type_Level_Transmitter--1373220_1419362.html]]></link><description><![CDATA[Operating Principle
The back pressure of air purge which is sensed by
semiconductor piezoelectric element is converged into
electrical signal and the level is measured. 
Range
Max. 10m
Process temper]]></description><pubDate><![CDATA[20150101]]></pubDate></item>
<item>
<title><![CDATA[Kneader and Internal Mixer]]></title><link><![CDATA[https://bjod.en.ec21.com/Kneader_and_Internal_Mixer--2032429_1894656.html]]></link><description><![CDATA[pressure on stocks
0.25-0.4 MPa
0.35-0.46 MPa
Pressure of Compressed air
0.8 MPa
0.8 MPa
Consumption of air
40m3/h
55m3/h
Max.pressure of vapour
0.7MPa
0.7MPa
Pressure of outside cooling water
0.4 MP]]></description><pubDate><![CDATA[20150307]]></pubDate></item>
<item>
<title><![CDATA[Metal Flue Gas Treatment System]]></title><link><![CDATA[https://sdngroups.en.ec21.com/Metal_Flue_Gas_Treatment_System--11906760_11906761.html]]></link><description><![CDATA[pressure reduction, high cutting efficiency, The emission concentration can be less than 5mg/m.
c. Online blowback and off-line cleaning, good regeneration effect, long service life;
d. Easy to recyc]]></description><pubDate><![CDATA[20240227]]></pubDate></item>
<item>
<title><![CDATA[Vacuum Drying Oven]]></title><link><![CDATA[https://lilyviyo12345.en.ec21.com/Vacuum_Drying_Oven--11853101_11854291.html]]></link><description><![CDATA[back wall of the drying oven 
Performance
Temperature range 
Room temperature + 30℃~+200℃ 
Temperature fluctuation 
≤ 1 ℃ 
Pressure range
Atmospheric
pressure ~1kPa
Controller 
Digital displa]]></description><pubDate><![CDATA[20231013]]></pubDate></item>
<item>
<title><![CDATA[Carbon Fiber Press Machine]]></title><link><![CDATA[https://zhengxi123456.en.ec21.com/Carbon_Fiber_Press_Machine--11797679_11797687.html]]></link><description><![CDATA[pressure, and time, and is suitable for processing various carbon fiber products. It adopts PLC control, is easy to operate, and has adjustable working parameters.
Structural Features of Carbon Fiber]]></description><pubDate><![CDATA[20230527]]></pubDate></item>
<item>
<title><![CDATA[Drawing Frame TMFD81L with Uster Autoleveller]]></title><link><![CDATA[https://tianmentextile.en.ec21.com/Drawing_Frame_TMFD81L_with_Uster--4167604_4685449.html]]></link><description><![CDATA[pressure bar.
Adjustable draft ratios for coiler, front draft, back draft and creel, bring more flexibility to the machine for various fibers.
Available for automatic filter cleaning and sliver cutte]]></description><pubDate><![CDATA[20131105]]></pubDate></item>
<item>
<title><![CDATA[Bicycle/Motorcycle/Seat Cushion Chair Back Rest Foam PU Turntable Production Line]]></title><link><![CDATA[https://sweetchan2010.en.ec21.com/Bicycle_Motorcycle_Seat_Cushion_Chair--10171890_5703987.html]]></link><description><![CDATA[pressure foam machine) and one production line.It can be customized according to the products which the users need to produce. 
Main Features:
1. The electricity components are imported; 2. The injec]]></description><pubDate><![CDATA[20240222]]></pubDate></item>
<item>
<title><![CDATA[Ship Plate Bending Machine]]></title><link><![CDATA[https://ezhonggroup.en.ec21.com/Ship_Plate_Bending_Machine--11511703_11511753.html]]></link><description><![CDATA[pressure-lubricating gun for smooth oiling. The hydraulic transmission device adopts a smooth box type.
3. Selection of smooth oil: Lithium-based smooth grease is used at the rolling bearing of each ]]></description><pubDate><![CDATA[20220117]]></pubDate></item>
<item>
<title><![CDATA[Power Tube Crimping Machine]]></title><link><![CDATA[https://hbpdyl.en.ec21.com/Power_Tube_Crimping_Machine--11765491_11765492.html]]></link><description><![CDATA[Power Tube Crimping Machine
The classification of the power tube crimping machine can be divided into hydraulic high-pressure pipe press, brake pipe press, air conditioning pipe press, power pipe pre]]></description><pubDate><![CDATA[20230406]]></pubDate></item>
<item>
<title><![CDATA[Fully Automatic Solar Laminator]]></title><link><![CDATA[https://solarlaminator.en.ec21.com/Fully_Automatic_Solar_Laminator--11768127_11843811.html]]></link><description><![CDATA[Pressure
0.6MPa—0.8MPa
Fully Automatic Solar Module Laminator Advantages
Improved Efficiency: Fully automatic solar module laminators are designed to operate continuously without interruption, whic]]></description><pubDate><![CDATA[20230912]]></pubDate></item>
<item>
<title><![CDATA[IG150 Internal Grinder]]></title><link><![CDATA[https://dunshiled.en.ec21.com/IG150_Internal_Grinder--11788188_11788484.html]]></link><description><![CDATA[pressure automatic lubrication system, smooth movement and good wear resistance.4. Automatic grinding: rough grinding, dressing, fine grinding, no spark grinding cycle action. High precision, conveni]]></description><pubDate><![CDATA[20230606]]></pubDate></item>
<item>
<title><![CDATA[SP30-SA Clamp Carrier]]></title><link><![CDATA[https://sagamachinery.en.ec21.com/SP30_SA_Clamp_Carrier--5821079_5821885.html]]></link><description><![CDATA[Back Pressure 25T 40T
Gluing Thickness 40mm or less 80mm or less
Gluing Size 1220*2440mm 1220*2440mm
Continuous gluing size 1250*6000mm or more 1250*6000mm or more
All mode include feeding and outlet]]></description><pubDate><![CDATA[20200916]]></pubDate></item>
<item>
<title><![CDATA[Air Vacuum Quenching Furnace Hardening for Extrusion Die Air-Cooled Horizontal]]></title><link><![CDATA[https://furnacevac.en.ec21.com/Air_Vacuum_Quenching_Furnace_Hardening--11856448_11856449.html]]></link><description><![CDATA[pressure airflow erosion, and the heat shield has a longer service life and is easier to maintain.
High-speed and high-pressure fans and high-efficiency copper-copper heat exchangers achieve rapid co]]></description><pubDate><![CDATA[20231019]]></pubDate></item>
<item>
<title><![CDATA[Float Collar]]></title><link><![CDATA[https://chinajixie.en.ec21.com/Float_Collar--6936628_6936782.html]]></link><description><![CDATA[pressure bump and back flow resistance;
Withstands long periods of circulation; 
Automatic fill-up, saves considerable running-in time of casing; 
Easy drill out with PDC bits; 
Special non-rotationa]]></description><pubDate><![CDATA[20170322]]></pubDate></item>
<item>
<title><![CDATA[Steel Backing Rings]]></title><link><![CDATA[https://sunplastpipe5.en.ec21.com/Steel_Backing_Rings--11597161_11816193.html]]></link><description><![CDATA[backing ringsSpecification available 
110-1200SDR/pressure ratings 
PN10 &amp; PN16Material to be used 
Stainless steel or carbon steelColors available 
Galvanized or coated by PP for carbon steelStandar]]></description><pubDate><![CDATA[20230706]]></pubDate></item>
<item>
<title><![CDATA[Automated Stacker]]></title><link><![CDATA[https://mwr1.en.ec21.com/Automated_Stacker--11450114_11450128.html]]></link><description><![CDATA[pressure detection(Light sensors)
○
Cargo offset detection(Ultrasonic)
○
Space detection(LiDAR point cloud)
○
Auto fork distance adjust
—
Lateral offset positioning
—
Inclination detection
]]></description><pubDate><![CDATA[20210924]]></pubDate></item>
<item>
<title><![CDATA[Portal Type CNC Flame Plasma Cutting Machine ZLT-C]]></title><link><![CDATA[https://longtangzhao.en.ec21.com/Portal_Type_CNC_Flame_Plasma--6604618_6698691.html]]></link><description><![CDATA[pressure type automatically adjustable high 7, spray FenXian: matching function 8, surface finish: Ra25 9, size accuracy: 1000 mm is +-0.5 mm Commonly used nc cutter type specification table: Gauge (]]></description><pubDate><![CDATA[20131109]]></pubDate></item>
<item>
<title><![CDATA[Medicine Plate Separation and Recycling]]></title><link><![CDATA[https://henanjufeng.en.ec21.com/Medicine_Plate_Separation_and_Recycling--10142194_10142274.html]]></link><description><![CDATA[pressure,feeding back, electric separation and other series of processes. metal recovery rate can reach 99.8%, purity of plastic is more than 99.7%. It adopts physical method ,namely ,dry method sepa]]></description><pubDate><![CDATA[20160907]]></pubDate></item>
<item>
<title><![CDATA[Oilfield Cementing Tools API Casing Float Shoe &amp; Float Collar]]></title><link><![CDATA[https://machinery14.en.ec21.com/Oilfield_Cementing_Tools_API_Casing--9182239_9182346.html]]></link><description><![CDATA[back-pressure leak proof structure, enable grout or slurry flow with less resistance 
4) Valve seat and valve disk can effectively prevent grout from flowing back 
5) Hardness of base material is equ]]></description><pubDate><![CDATA[20140912]]></pubDate></item>
<item>
<title><![CDATA[Custom Design Dome Array]]></title><link><![CDATA[https://best654.en.ec21.com/Custom_Design_Dome_Array--11776093_11855614.html]]></link><description><![CDATA[Dome Arrays are pre-loaded polyester dome carriers backed with pressure sensitive adhesive. Arrays come loaded with the dome(s) of your choice, cut to the size and shape you specify. Different sizes,]]></description><pubDate><![CDATA[20231017]]></pubDate></item>
<item>
<title><![CDATA[Full Auto Cut To Length Line]]></title><link><![CDATA[https://kingreal.en.ec21.com/Full_Auto_Cut_To_Length--11705059_11705060.html]]></link><description><![CDATA[pressure fan to prevent friction of metal sheet.● Hydraulic systemMake sure that each hydraulic component is used.The working pressure of the hydraulic system is 6.3-16Mpa.
Advantage Of Full Auto C]]></description><pubDate><![CDATA[20230109]]></pubDate></item>
<item>
<title><![CDATA[The Working Principle of LBH Dust Seal Fits Excavator]]></title><link><![CDATA[https://sanping.en.ec21.com/The_Working_Principle_of_LBH--11828890_11858174.html]]></link><description><![CDATA[pressure, the tighter the seal and the coupling, to block the leakage channel, and achieve the &quot;self-sealing&quot; effect.
The self-sealing self-tightening seal uses the back pressure generated by the def]]></description><pubDate><![CDATA[20231024]]></pubDate></item>
<item>
<title><![CDATA[Wood Briquette Machine]]></title><link><![CDATA[https://gomine.en.ec21.com/Wood_Briquette_Machine--11809704_11813309.html]]></link><description><![CDATA[pressure.
Applicable raw materials
Saw Dust, Bamboo dust, Bagasse, Cotton
Stalk, Coffee husk, Groundnut Shell, Mustard Husk/Stalk, Pine Needles, Rice
Husk, Sugar Mill Waste, Jute waste, Coir pith and]]></description><pubDate><![CDATA[20230630]]></pubDate></item>
<item>
<title><![CDATA[Dry Ice Cleaning Machine Dry Ice Blaster Dry Ice Blasting Machine]]></title><link><![CDATA[https://wmmachinery.en.ec21.com/Dry_Ice_Cleaning_Machine_Dry--11537767_11538530.html]]></link><description><![CDATA[pressure air flow, and then pushed by the air flow through the ice conveying pipe, and is constrained to a specific air flow line by the handle spray gun and sprayed out.It hits the dirt surface and ]]></description><pubDate><![CDATA[20220304]]></pubDate></item>
<item>
<title><![CDATA[Guillotine Shears]]></title><link><![CDATA[https://vaavmac.en.ec21.com/Guillotine_Shears--11721877_11721878.html]]></link><description><![CDATA[Back Gauge.
For 2-3 mm machines,T-slotted square with 800 mm length and
metric 
ruler.
For 4-5-6mm machines,T-slotted square with 1000 mm length
with 
stopper and metric ruler.
Mechanical pressure sy]]></description><pubDate><![CDATA[20230520]]></pubDate></item>
<item>
<title><![CDATA[Earth Station Antenna]]></title><link><![CDATA[https://dolphmw.en.ec21.com/Earth_Station_Antenna--11689661_11746461.html]]></link><description><![CDATA[pressurization systems. Microprocessor Step track Control and motorizable mount options are also available. Diameter and operational frequency range are various. Taking 9.0-meter Earth Station Antenn]]></description><pubDate><![CDATA[20230313]]></pubDate></item>
<item>
<title><![CDATA[Fume Extraction System, Dust Extraction Systems Manufacturers]]></title><link><![CDATA[https://9482395368.en.ec21.com/Fume_Extraction_System_Dust_Extraction--11876520_11876526.html]]></link><description><![CDATA[Pressure Centrifugal Blower Manufacturer from Bengaluru
Leading
Manufacturer , Wholesaler and Exporter of Industrial Fans such as Industrial
Pedastal Fans , Wall Mount Fans , Exhaust Fans , Tubular F]]></description><pubDate><![CDATA[20231216]]></pubDate></item>

</channel>
</rss>