<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - bars.]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/bars.--2673/1/bars..html]]></link><item>
<title><![CDATA[Solder Paste Solder Bar Solder Wire]]></title><link><![CDATA[https://mecindustries.en.ec21.com/Solder_Paste_Solder_Bar_Solder--11247334_11247377.html]]></link><description><![CDATA[]]></description><pubDate><![CDATA[20260209]]></pubDate></item>
<item>
<title><![CDATA[Steel Bar Forging Heating,Steel Bar Forging Heating Furnace]]></title><link><![CDATA[https://inductinheating.en.ec21.com/Steel_Bar_Forging_Heating_Steel--9931327_9934002.html]]></link><description><![CDATA[Product name: Steel bar forging heating,steel bar forging heating furnace
Technical Parameters
Model
MFP-160
Rated Output Power
160KW
Frequency Range
0.5-10Khz
Power Capacity
230KVA
Input Power
380V/]]></description><pubDate><![CDATA[20250320]]></pubDate></item>
<item>
<title><![CDATA[Reinforcing Steel Bar]]></title><link><![CDATA[https://xghwsteel.en.ec21.com/Reinforcing_Steel_Bar--11959637_11959638.html]]></link><description><![CDATA[https://www.xghwsteel.com/reinforcing-steel-bar.html
Reinforcing Steel Bar
Most people are familiar with reinforcing steel bar
, commonly known as “rebar”. It is used in bridges, buildings, skysc]]></description><pubDate><![CDATA[20240629]]></pubDate></item>
<item>
<title><![CDATA[Threaded Rods &amp; Bars, Hex Bolts, Hex Nuts Fasteners Strut Support]]></title><link><![CDATA[https://kanikafastenerspvtlt.en.ec21.com/Threaded_Rods_Bars_Hex_Bolts--11934095_11934096.html]]></link><description><![CDATA[Kanika Exports are manufactures &amp; exporters of various types of products like- Threaded Rods/ Bars, Coil Rods/ Tie Rods , Threaded Studs, Hex Nuts, Hex Bolts, Plain Washers, Spring Washers, Spring Ch]]></description><pubDate><![CDATA[20240509]]></pubDate></item>
<item>
<title><![CDATA[Titanium Threaded Rod/Bar]]></title><link><![CDATA[https://cstitanium1.en.ec21.com/Titanium_Threaded_Rod_Bar--11858526_11931207.html]]></link><description><![CDATA[bar
s and rods are widely used in various industries such as electroplating, electrolysis, chemical engineering, medical equipment, aquaculture, electronic hardware, plastics, etc. If you want to cus]]></description><pubDate><![CDATA[20240430]]></pubDate></item>
<item>
<title><![CDATA[12-15m/Min Steel Bar Welding Machine for Construction Bridge Engineering]]></title><link><![CDATA[https://steelbarwelding.en.ec21.com/12_15m_Min_Steel_Bar--11868784_11868785.html]]></link><description><![CDATA[bar welder that provides high-performance welding for all types of steel bars. With a welding speed of 12-15m per minute, this welding apparatus can weld steel bars of lengths ranging from 0.4m to 12]]></description><pubDate><![CDATA[20231121]]></pubDate></item>
<item>
<title><![CDATA[Strong Pull Permanent Powerful Neodymium Block N52 Bar Cylinder Rare Earth Rod Magnet]]></title><link><![CDATA[https://pdyihangdun.en.ec21.com/Strong_Pull_Permanent_Powerful_Neodymium--11861772_11861778.html]]></link><description><![CDATA[MaterialNeodymium-Iron-BoronWorking TemperatureGradeMax. Operating TemperatureN35-N5280°C35M-50M120°C35H-48H130°C35SH-45SH180°C33UH-42UH220°C30EH-35EH150°C30TH-35TH280°CMagnet ShapeDisc, Cylin]]></description><pubDate><![CDATA[20231102]]></pubDate></item>
<item>
<title><![CDATA[Carbon Steel Silica Sol Investment Casting Shifting Bar]]></title><link><![CDATA[https://zhiyecasting3322.en.ec21.com/Carbon_Steel_Silica_Sol_Investment--11736185_11744576.html]]></link><description><![CDATA[Material:45#
FOB Price:US$0.5-$9,999/piece
MOQ:200 pieces/item
Supply Capability:10,000 pieces/Month
Sea Port:Ningbo Seaport
Terms of Payment:T/T 30% in advance,balance 70% before shipment
Technique:]]></description><pubDate><![CDATA[20230310]]></pubDate></item>
<item>
<title><![CDATA[Extruded Rods, Bars, Flats, Spl. Profiles]]></title><link><![CDATA[https://senormetal.en.ec21.com/Extruded_Rods_Bars_Flats_Spl.--10737744_10738088.html]]></link><description><![CDATA[1.00 mm &amp;ndash; 115 mm Circumscribed Diameter 
]]></description><pubDate><![CDATA[20180528]]></pubDate></item>
<item>
<title><![CDATA[L4.007.521 Bearing DS Tol.Gr.B for Heidelberg Sucker Bar Cpl XL Suction Device XL Operting Rod SX PM]]></title><link><![CDATA[https://17728144958.en.ec21.com/L4.007.521_Bearing_DS_Tol.Gr.B_for--11775760_11777429.html]]></link><description><![CDATA[L4.007.521 Bearing DS Tol.Gr.B For Heidelberg Sucker Bar Cpl XL Suction Device XL Operting Rod SX PM SM Printing Machine Part
Sensor F2.122.1311
Sensor F2.110.7310
Sensor F2.122.1331
Sensor F2.122.13]]></description><pubDate><![CDATA[20230427]]></pubDate></item>
<item>
<title><![CDATA[Plug Bar Assembly]]></title><link><![CDATA[https://iequipment2023.en.ec21.com/Plug_Bar_Assembly--11880319_11880368.html]]></link><description><![CDATA[Material: 42CrMo
Heat treatment: quenching and tempering
Hardness: According to the drawing requirements
]]></description><pubDate><![CDATA[20231227]]></pubDate></item>
<item>
<title><![CDATA[Cast Roll Rings, Sleeves, Rollers for Section Mills, Bar &amp; Pipe Mills (SGP Sleeves, Accicular Rings)]]></title><link><![CDATA[https://leonard851107.en.ec21.com/Cast_Roll_Rings_Sleeves_Rollers--11895855_11895911.html]]></link><description><![CDATA[bar mill and section mill to roll disections in different shape like I section, H section and etc.
Sleeves &amp; Rings
CLASSFICATIONCHEMISTRYHardness (HSC)Tensile Strength (N/mm2)CSiMnCrNiMoSGP2.90-3.601]]></description><pubDate><![CDATA[20240131]]></pubDate></item>
<item>
<title><![CDATA[Palladium Ingots , Palladium Bars and Palladium Catalyst Carrier]]></title><link><![CDATA[https://multipurpose.en.ec21.com/Palladium_Ingots_Palladium_Bars_and--11655754_11655763.html]]></link><description><![CDATA[We have large quantity of Palladium ingots , Palladium Bars and Palladium Catalyst Carrier Activated Alumina Catalyst with Pd 0.5% for sell.
We can supply your company at a good rate and ship to your]]></description><pubDate><![CDATA[20221013]]></pubDate></item>
<item>
<title><![CDATA[High Strength Block Tungsten Carbide Price Carbide Bars Blank Tungsten Carbide Plates Strips]]></title><link><![CDATA[https://hengruitina01.en.ec21.com/High_Strength_Block_Tungsten_Carbide--11641273_11809259.html]]></link><description><![CDATA[硬质合金块高强度块碳化钨价格硬质合金棒空白/碳化钨板条 主要用于电子和半导体领域的耐磨零件，发动机定子的高精度冲压，发动机转子，EI钢板。]]></description><pubDate><![CDATA[20230620]]></pubDate></item>
<item>
<title><![CDATA[330mm Solid Tungsten Carbide Rods Bars with 2 Helical Coolant Holes]]></title><link><![CDATA[https://sales5zzbetter.en.ec21.com/330mm_Solid_Tungsten_Carbide_Rods--11737015_11737759.html]]></link><description><![CDATA[What is tungsten carbide rod?
Tungsten carbide rod, also called carbide round bar, cemented carbide rod, is a high-hardness, high-strength and high-hardness material which has a major raw material of]]></description><pubDate><![CDATA[20230303]]></pubDate></item>
<item>
<title><![CDATA[GW40 Series CNC Automatic Control Construction Machinery Electric Steel Bar Cutter Bender]]></title><link><![CDATA[https://swhome.en.ec21.com/GW40_Series_CNC_Automatic_Control--277690_2012097.html]]></link><description><![CDATA[Bar
Material / Metal Processed:
Carbon Steel
Power:
electric
Automation:
Manual
Extra Services:
End Forming
Certification:
ISO 9001:2000
After-sales Service Provided:
Weight:
400Kg
Dimension:
1050*85]]></description><pubDate><![CDATA[20171023]]></pubDate></item>
<item>
<title><![CDATA[Titanium Flat Bar]]></title><link><![CDATA[https://hqfactory.en.ec21.com/Titanium_Flat_Bar--11592333_11592356.html]]></link><description><![CDATA[Titanium Flat Bar Stock
HQ is one of leading titanium flat bar suppliers
in the local market. Please feel free to contact us for more details and a quick quotation.
TITANIUM FLAT BAR APPLICATIONS
Ele]]></description><pubDate><![CDATA[20220624]]></pubDate></item>
<item>
<title><![CDATA[Billet /Bar Induction Partial Heating Machine]]></title><link><![CDATA[https://tyinduction.en.ec21.com/Billet_Bar_Induction_Partial_Heating--11686230_11822646.html]]></link><description><![CDATA[Billet /Bar Induction Partial Heating Machine
Product Description
An induction billet heater
is a specialized piece of equipment that uses induction heating to heat billets, which are small, cylindri]]></description><pubDate><![CDATA[20240314]]></pubDate></item>
<item>
<title><![CDATA[Plain Coating Metal Threaded Rod Stud Bar DIN975 976 Metric Size L7 L7M L43]]></title><link><![CDATA[https://metalthre.en.ec21.com/Plain_Coating_Metal_Threaded_Rod--11817049_11817050.html]]></link><description><![CDATA[Grade B7M—The maximum hardness of the grade shall be 235 HBW or 99 HRB. The minimum hardness shall not be less than 200 HBW or 93 HRB. Conformance to this hardness shall be ensured by testing the h]]></description><pubDate><![CDATA[20230708]]></pubDate></item>
<item>
<title><![CDATA[PVC F Section Bar]]></title><link><![CDATA[https://lusen.en.ec21.com/PVC_F_Section_Bar--11909195_11911077.html]]></link><description><![CDATA[Our company can provide a variety of profiles to meet the various installation requirements of customers. In the installation of air pipes, PVC F section bar and H bayonet are used to connect the str]]></description><pubDate><![CDATA[20240312]]></pubDate></item>
<item>
<title><![CDATA[Bar Machining]]></title><link><![CDATA[https://cfsm1114.en.ec21.com/Bar_Machining--5693972_5779012.html]]></link><description><![CDATA[Weight:4.71Lbs
Material:Cut steel
Process:Bar Machining
Various designs are available
Customized drawings are accepted
]]></description><pubDate><![CDATA[20130701]]></pubDate></item>
<item>
<title><![CDATA[Stainless Steel Grate Bar for Sinter Plant: Industrial Solutions by Piyali Group, India]]></title><link><![CDATA[https://piyaligroup.en.ec21.com/Stainless_Steel_Grate_Bar_for--11903840_11905202.html]]></link><description><![CDATA[We are pleased to introduce Piyali Engineering Corporation, located in Delhi, India. We are leading manufacturer and supplier specializing in the production of Sponge Plant DRI (Direct Reduced Iron) ]]></description><pubDate><![CDATA[20240222]]></pubDate></item>
<item>
<title><![CDATA[Conveyor Components]]></title><link><![CDATA[https://yipark777.en.ec21.com/Conveyor_Components--10141728_12056743.html]]></link><description><![CDATA[Conveyor Components
Intended use: Refers to many types of components installed on a conveyor line together with a conveyor belt.
Types: drive pulleys, band pulleys, take-up pulleys, scrapers, impact ]]></description><pubDate><![CDATA[20250708]]></pubDate></item>
<item>
<title><![CDATA[Stainless Steel Wine/Cider Fermentation and Storage Tank]]></title><link><![CDATA[https://hgbeerequipmemt.en.ec21.com/Stainless_Steel_Wine_Cider_Fermentation--12028508_12034026.html]]></link><description><![CDATA[bar. The fermentation tanks use certified stainless steel material. All tanks and jackets inspected and pressure tested to 3 times operatiing pressure.Item Production capacity Volume in US Gallon Hea]]></description><pubDate><![CDATA[20260304]]></pubDate></item>
<item>
<title><![CDATA[Water Hammer Arrester]]></title><link><![CDATA[https://gtijames7.en.ec21.com/Water_Hammer_Arrester--12064232_12064233.html]]></link><description><![CDATA[bar) working pressure.
3. Temperature Range : 33℉(0.5℃ to 82℃)
Materials Description
1. Body : Copper barrel
2. Piston : Polypropylene
3. Adapter : Lead Free* Brass
4. O-ring : EPDM
Features
1.]]></description><pubDate><![CDATA[20251210]]></pubDate></item>
<item>
<title><![CDATA[CROSS-TYPE Zig-Zag ECO HYBRID TRANSFORMER]]></title><link><![CDATA[https://dodotrad.en.ec21.com/CROSS_TYPE_Zig_Zag_ECO--12066796_12068395.html]]></link><description><![CDATA[harmonic current combined at the bus bar is reversed by adjusting the phase of the primary and secondary voltages in one of the two loads
This is method of reducing harmonics by canceling them out.
]]></description><pubDate><![CDATA[20260308]]></pubDate></item>
<item>
<title><![CDATA[Schiedrum Hydraulik Current Control Valve 23 A]]></title><link><![CDATA[https://25025225.en.ec21.com/Schiedrum_Hydraulik_Current_Control_Valve--12045053_12045520.html]]></link><description><![CDATA[lever
plate structure NG 8
hole pattern according to Schiedrum house standard
8 nominal flow rate ranges 1 l/min to 16 l/min
smallest adjustable volume flow approx. 10 cm 3 /min
P max = 210 bar
]]></description><pubDate><![CDATA[20250227]]></pubDate></item>
<item>
<title><![CDATA[Industrial Powder Booth/Powder Oven Paint Booth Conveyor System]]></title><link><![CDATA[https://starpaintindustries.en.ec21.com/Industrial_Powder_Booth_Powder_Oven--11592005_11848484.html]]></link><description><![CDATA[Bar transfer systems are ideal for small production areas and offer flexible loading solutions.
Drying and curing ovens play a crucial role in the coating process by drying or curing the powder or co]]></description><pubDate><![CDATA[20250219]]></pubDate></item>
<item>
<title><![CDATA[X-SW1800 Mini Aqua Low Fog Machine]]></title><link><![CDATA[https://djpowerfx.en.ec21.com/X_SW1800_Mini_Aqua_Low--11941313_12038402.html]]></link><description><![CDATA[H-SW1800 mini aqua low fog machine
creates a continuous spooky low-lying fog hugs the floor and dissipates without rising. By using the Ultrasonic technology, needs for dry ice is eliminated. The mai]]></description><pubDate><![CDATA[20250121]]></pubDate></item>
<item>
<title><![CDATA[3-20LPM Oxygen Generator]]></title><link><![CDATA[https://qjozonetech.en.ec21.com/3_20LPM_Oxygen_Generator--11938412_12036992.html]]></link><description><![CDATA[Bar)
0.1(1)
Voltage
V
220/110
Air Input
/
Inner air compressor
Inner air compressor
Inner air compressor
External air compressor
External air compressor
External Case
/
Stainless Steel
Requirement of]]></description><pubDate><![CDATA[20250115]]></pubDate></item>
<item>
<title><![CDATA[Simple Type Pressure Coolant System]]></title><link><![CDATA[https://fengmei123.en.ec21.com/Simple_Type_Pressure_Coolant_System--11975432_11975433.html]]></link><description><![CDATA[bar to
300bar.
For
applications of machining precision parts, During parts machining, lots of heat is
generated would deform parts, crack the tools, 
or even unintentionally heat
treating the parts. ]]></description><pubDate><![CDATA[20250106]]></pubDate></item>
<item>
<title><![CDATA[KN95 High-speed Automatic Mask Machine]]></title><link><![CDATA[https://nekonultrasonics.en.ec21.com/KN95_High_speed_Automatic_Mask--12031083_12031085.html]]></link><description><![CDATA[bar sticking, breath valve welding and pad printing function.
Application
KN95 masks in the medical and health field:
- Hospitals and clinics: In daily diagnosis and treatment, surgery, nursing and o]]></description><pubDate><![CDATA[20241213]]></pubDate></item>
<item>
<title><![CDATA[The Other Accessary Equipments &amp; Industrial Equipments]]></title><link><![CDATA[https://kims168.en.ec21.com/The_Other_Accessary_Equipments_Industrial--2_1368548.html]]></link><description><![CDATA[design and manufacturing of the other industrial equipments by customer&apos;s 
request and needs.
Copper &amp; Copper Alloy Tube, Rod and Bus-bar production plant engineering and equipments supplying.
]]></description><pubDate><![CDATA[20241210]]></pubDate></item>
<item>
<title><![CDATA[Copper Rod, Brass Tube Rod, Bronze Tube Rod, Nickel Silver Rod, Luoyang Copper Processing Factory Cu]]></title><link><![CDATA[https://songsuccess.en.ec21.com/Copper_Rod_Brass_Tube_Rod--11627027_12028163.html]]></link><description><![CDATA[bar minimum order quantity (500kg for outer diameter ≤Φ100mm, 1000kg for outer diameter＞Φ100mm) The above is the recommended minimum order quantity. If you have special requirements, please con]]></description><pubDate><![CDATA[20241128]]></pubDate></item>
<item>
<title><![CDATA[IGBT Induction Heating Machine]]></title><link><![CDATA[https://duolin.en.ec21.com/IGBT_Induction_Heating_Machine--12026187_12026190.html]]></link><description><![CDATA[bar feeding, infrared sensor, bar sorting system, easy to put into hot forging production line.
IGBT Induction Heating Machine
Technical information
1. Good start up performance: IGBT MF induction po]]></description><pubDate><![CDATA[20241121]]></pubDate></item>
<item>
<title><![CDATA[Cryogenic Storage Tanks]]></title><link><![CDATA[https://alphacryogen.en.ec21.com/Cryogenic_Storage_Tanks--12024255_12024256.html]]></link><description><![CDATA[16 bar working pressure.Also prices are change according to M3.
The cubic meter dimensions are as follows.*3m3 /5m3 / 10m3 / 15m3 / 20m3.
The price given is for 3m3, please contact for other sizes.
]]></description><pubDate><![CDATA[20241113]]></pubDate></item>
<item>
<title><![CDATA[Concrete Pole Machine,Concrete Pole,Concrete Pole Production Line]]></title><link><![CDATA[https://hopeland2010.en.ec21.com/Concrete_Pole_Machine_Concrete_Pole--4261220_9726473.html]]></link><description><![CDATA[bar straightening-cutting machine
2
11
ф2500, 2T steel wire roll unfastening device
2
12
Reeling machine (inner and outer ring)
2
13
Air pressure gun for mould closing
30
14
Air compressor 10m3
2
15]]></description><pubDate><![CDATA[20241113]]></pubDate></item>
<item>
<title><![CDATA[ZTS-40C Taper Thread Cutting Machine]]></title><link><![CDATA[https://jm200022.en.ec21.com/ZTS_40C_Taper_Thread_Cutting--12019926_12021347.html]]></link><description><![CDATA[Taper threading machineYDZTS-40C Rebar Taper Thread Cutting Machine is designed and manufactured by Hebei Yida Reinforcing Bar Connecting Technology Co., Ltd. It is mainly used as a special equipment]]></description><pubDate><![CDATA[20241030]]></pubDate></item>
<item>
<title><![CDATA[CNC Machining Center Rapid Prototypes in Top Quality Steel]]></title><link><![CDATA[https://vowin002.en.ec21.com/CNC_Machining_Center_Rapid_Prototypes--10304778_10724766.html]]></link><description><![CDATA[bar,Automobile and motorcycle
5. Household appliance, Rice cooker, Air conditioner, Induction cooker, TV, 
Fanshower and etc.
6. Kitchenwares,Crafts, Perfume bottle, Lighter,Kitchenware, Cookie molds]]></description><pubDate><![CDATA[20241009]]></pubDate></item>
<item>
<title><![CDATA[Vacuum Graphitization Furnace]]></title><link><![CDATA[https://und24.en.ec21.com/Vacuum_Graphitization_Furnace--12009016_12009022.html]]></link><description><![CDATA[bar
Optional High Vacuum 
(CEDRT)* 
5×10-5 m bar
Pressure rise 
6.7×10-3 m bar/hr
Working atmosphere 
High vacuum (optional)/vacuum/inert gas (argon or nitrogen)
Vacuum and high vacuum atmospheres ]]></description><pubDate><![CDATA[20240924]]></pubDate></item>
<item>
<title><![CDATA[Stainless Fast Loading Sanitary Butterfly Valve Diagram, Butterfly Valve 3D]]></title><link><![CDATA[https://polly2333.en.ec21.com/Stainless_Fast_Loading_Sanitary_Butterfly--10605620_10635994.html]]></link><description><![CDATA[Bar/16Bar/25Bar or class 125/150
Nominal diameter:
DN25~DN1200 (1
Operator:
Handle lever, worm gearbox(reducer), electric or pneumatic actuators etc.
Suitable medium:
Petroleum, chemical industry, wa]]></description><pubDate><![CDATA[20240828]]></pubDate></item>
<item>
<title><![CDATA[Cabide Components]]></title><link><![CDATA[https://hrbtinvo.en.ec21.com/Cabide_Components--8575911_8576285.html]]></link><description><![CDATA[Machining Types: Machined by Round Bar and steel plate, Drilling, Milling, Turning, Boring, Slating, Grinding,, NC/CNC Machining etc.
4. Tolerance is controlled by CMM Machine.
5. OEM Service
]]></description><pubDate><![CDATA[20240826]]></pubDate></item>
<item>
<title><![CDATA[Tungsten Carbide Wear Resistant Block Rod]]></title><link><![CDATA[https://carl072.en.ec21.com/Tungsten_Carbide_Wear_Resistant_Block--11954473_11986348.html]]></link><description><![CDATA[Tungsten carbide blocks are ideal for a wide range of manufacturers who face challenges related to wear and corrosion. The carbide tooling and wear parts we produce for metal forming, material transf]]></description><pubDate><![CDATA[20240816]]></pubDate></item>
<item>
<title><![CDATA[3 Inch To 6 Inch Nylon Adapter]]></title><link><![CDATA[https://dgsynectics.en.ec21.com/3_Inch_To_6_Inch--11970403_11982413.html]]></link><description><![CDATA[bar length is 100mm, width is 8mm G. The outside of air drum surface, which part bulge ia made by rubber, having been produced with the design being finalized, we have stock. Total length ID 190mm. N]]></description><pubDate><![CDATA[20240808]]></pubDate></item>
<item>
<title><![CDATA[Automatic Net Winding Machine]]></title><link><![CDATA[https://dingniumachines.en.ec21.com/Automatic_Net_Winding_Machine--11072920_11072937.html]]></link><description><![CDATA[Automatic net winding machine
Automatic Welded Wire Mesh Fence Machine
Technical parameters:
1. The width of welding mesh is 1.2m to 2.5m
2. The diameter of welded steel bar is 2mm-4mm
3. Welding mes]]></description><pubDate><![CDATA[20240712]]></pubDate></item>
<item>
<title><![CDATA[C85300 Bronze with Graphite Plugs Bearings:]]></title><link><![CDATA[https://viiplusbearing.en.ec21.com/C85300_Bronze_with_Graphite_Plugs--11082003_11082013.html]]></link><description><![CDATA[their commitment to continuously raising the bar in the mechanical industry, offering cost-effective, efficient, and durable solutions for a diverse range of applications.
https://viiplus.com/
]]></description><pubDate><![CDATA[20240704]]></pubDate></item>
<item>
<title><![CDATA[Bhr700v]]></title><link><![CDATA[https://1347013828.en.ec21.com/Bhr700v--11962667_11962673.html]]></link><description><![CDATA[bar diameter
mm
φ67
φ67
Travel
X1 axis
mm
845
845
X2 axis
mm
--
270
Z1 axis
mm
2680/1680
2680/1680
Z2 axis
mm
--
2600/1600
W axis(Sub-spindle)
mm
--
2400/1570
Y axis( Upper turret)
mm
430(±215)
43]]></description><pubDate><![CDATA[20240704]]></pubDate></item>
<item>
<title><![CDATA[Fabric Fortification]]></title><link><![CDATA[https://kovalentcoatings.en.ec21.com/Fabric_Fortification--11952982_11960587.html]]></link><description><![CDATA[interacting with the fabric&apos;s intrinsic breathability. This amazing coating, similar to Ceramic Coatings, also has antibacterial qualities, which raises the bar on protection to a whole new level.]]></description><pubDate><![CDATA[20240701]]></pubDate></item>
<item>
<title><![CDATA[Mechanically Actuated Brakes KBM1 Pneumatic Caliper Brakes KB1 Spring-loaded Brakes KBS1]]></title><link><![CDATA[https://kestprc.en.ec21.com/Mechanically_Actuated_Brakes_KBM1_Pneumatic--10523707_11018876.html]]></link><description><![CDATA[bar
KB1-2 1516 N at 6 bar
KB1-3 3888 N at 6 bar
Dynamic torque
= F*(disc radius in m - 0.024) = Nm
Max total wear: 6 mm
Thickness of new lining: 5 mm
Continuous thermal capacity Qc: 1 kW
3.Technical ]]></description><pubDate><![CDATA[20240530]]></pubDate></item>
<item>
<title><![CDATA[Conveyor Belt Customization]]></title><link><![CDATA[https://yanyan1818.en.ec21.com/Conveyor_Belt_Customization--4848845_4849360.html]]></link><description><![CDATA[bar and Hangzhou steel buckle.
PVC conveyor belt
Choosing and determining the belt speed of PVC conveyor belt needs to consider many factors to ensure the stable operation in the working process and ]]></description><pubDate><![CDATA[20240509]]></pubDate></item>

</channel>
</rss>