<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - can be reached under]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/can_be_reached_under--2673/1/can be reached under.html]]></link><item>
<title><![CDATA[Biomass Carbonization Furnace]]></title><link><![CDATA[https://bntet.en.ec21.com/Biomass_Carbonization_Furnace--12042309_12042327.html]]></link><description><![CDATA[can reach 380℃to 450℃. At high temperatures, the biomass undergoes internal dehydration, demethylation and organic volatilization. Thus, the biomass is converted into biochar.3.Combustible Gas Re]]></description><pubDate><![CDATA[20250211]]></pubDate></item>
<item>
<title><![CDATA[High Qualify Cbn Inserts Long Life CNGA120404/DNGA150404/TNGA160404/VNGA160408 Inserts Good Cbn Tool]]></title><link><![CDATA[https://aassddffgghhjjkkll.en.ec21.com/High_Qualify_Cbn_Inserts_Long--12035213_12035482.html]]></link><description><![CDATA[reaching above 5500HV, which gives them extremely high wear resistance and tensile strength, allowing them to work under high loads and speeds.
2. High thermal stability: CBN tools have good high-tem]]></description><pubDate><![CDATA[20250108]]></pubDate></item>
<item>
<title><![CDATA[Powder Coating Equipment for Aluminum]]></title><link><![CDATA[https://wldclean.en.ec21.com/Powder_Coating_Equipment_for_Aluminum--646766_3991456.html]]></link><description><![CDATA[reach full cure and establish the full film properties for which the material was designed. The curing schedule could vary according to the manufacturer&apos;s specifications. It can be accomplished by co]]></description><pubDate><![CDATA[20241204]]></pubDate></item>
<item>
<title><![CDATA[Corn Dry Machine Maize Dry Machine]]></title><link><![CDATA[https://qingshannj.en.ec21.com/Corn_Dry_Machine_Maize_Dry--9855828_10107976.html]]></link><description><![CDATA[under the action of two electric fans. The air flows and takes off the moisture of the grain. Then the exhaust gas is excluded out of the machine by the exhaust fan when the moisture reaching to the ]]></description><pubDate><![CDATA[20240820]]></pubDate></item>
<item>
<title><![CDATA[Desktop Digital Label Die Cutter VR240]]></title><link><![CDATA[https://cncvicut6.en.ec21.com/Desktop_Digital_Label_Die_Cutter--11962258_11962262.html]]></link><description><![CDATA[can be used. Maximum slitting speed can reach to 60m/min.
Platform for splicing materials
When you finish cutting a roll of label and prepare to cut another roll, you can use this platform to splice ]]></description><pubDate><![CDATA[20240703]]></pubDate></item>
<item>
<title><![CDATA[Main Control Board 500CIM05 1MRB150077R1/B]]></title><link><![CDATA[https://wwww666666.en.ec21.com/Main_Control_Board_500CIM05_1MRB150077R1--11939088_11948444.html]]></link><description><![CDATA[BE101VME-PMC - caddy is used for VME board expansion of 2 PMC modules. VMEbus system can easily add up to 2 PMC modules to VMEbus system. All PMC I/O signals are routed to VMEbus 　　connector P2 a]]></description><pubDate><![CDATA[20240612]]></pubDate></item>
<item>
<title><![CDATA[AWGAGE-150 Metal Film Metrology]]></title><link><![CDATA[https://allwin21.en.ec21.com/AWGAGE_150_Metal_Film_Metrology--9763377_9763391.html]]></link><description><![CDATA[under the measurement head in the loading/unloading position. The wafer can be removed from the carriage after it has reached this position.
Automatic Mode: Press the MAN/AUTO button on the AWgage-15]]></description><pubDate><![CDATA[20240514]]></pubDate></item>
<item>
<title><![CDATA[FUNGOM Spray Paint Wholesale]]></title><link><![CDATA[https://fungom.en.ec21.com/FUNGOM_Spray_Paint_Wholesale--11921983_11921985.html]]></link><description><![CDATA[can be customized. The spray paint for sale is easy to carry, easy to use and quick-drying and is loved by the majority of buyers.
Spray Paint Types for Sale
Acrylic Spray Paint
Aerosol Spray Paint R]]></description><pubDate><![CDATA[20240408]]></pubDate></item>
<item>
<title><![CDATA[CNC Automatic Aluminum Cutting Machine]]></title><link><![CDATA[https://pipepunching.en.ec21.com/CNC_Automatic_Aluminum_Cutting_Machine--11917366_11921616.html]]></link><description><![CDATA[can be used to cut parts such as wing skins, fuselage frames, and engine parts.
Automotive Industry: CNC automatic aluminum cutting machines can be used to cut aluminum parts such as engine blocks, c]]></description><pubDate><![CDATA[20240407]]></pubDate></item>
<item>
<title><![CDATA[Enclosure Type Laser Cutting Machine HS-CG1530 Series]]></title><link><![CDATA[https://cmbio12.en.ec21.com/Enclosure_Type_Laser_Cutting_Machine--11774782_11775427.html]]></link><description><![CDATA[reached over 40% in 2015. The electrical cost savings add up to many tens of thousands of dollars over lifetime of a laser. Hot redundancy ensures 100% up time with no change in power, record reliabi]]></description><pubDate><![CDATA[20240318]]></pubDate></item>
<item>
<title><![CDATA[CX-250/630zf Electro Fusion Wire Laying Equipment]]></title><link><![CDATA[https://electrofusion.en.ec21.com/CX_250_630zf_Electro_Fusion--10288026_10288032.html]]></link><description><![CDATA[under the condition of main axis started, 
hole &amp; angle as per tech demands,Edit program processing automatically. (can be changed as per demands)
2 Laying wire
The process of embedding wires called ]]></description><pubDate><![CDATA[20170124]]></pubDate></item>
<item>
<title><![CDATA[Plate Bending Machine]]></title><link><![CDATA[https://ezhonggroup.en.ec21.com/Plate_Bending_Machine--11602248_11602263.html]]></link><description><![CDATA[be applied. After the required amount of overwinding is reached, it should be rolled back down to this curvature several times. High-strength steel has a large rebound. In order to reduce the rebound]]></description><pubDate><![CDATA[20220713]]></pubDate></item>
<item>
<title><![CDATA[High Pressure Pipe Crimping Machine]]></title><link><![CDATA[https://hbpdyl.en.ec21.com/High_Pressure_Pipe_Crimping_Machine--11765491_11765496.html]]></link><description><![CDATA[reaches the critical relative compression amount, the crimping process can be directly controlled by the connection quality; No need to detect the fit gap between the coat and the steel/rubber compos]]></description><pubDate><![CDATA[20230406]]></pubDate></item>
<item>
<title><![CDATA[Automated Stacker AGV]]></title><link><![CDATA[https://mwr1.en.ec21.com/Automated_Stacker_AGV--11450114_11499247.html]]></link><description><![CDATA[AGV Stacker Pallet MW-L14/16, using laser navigation and positioning, the payload reaches 1.4 tons, and the lifting height can reach 5.4m. It is mainly used in various handling vehicles for loading a]]></description><pubDate><![CDATA[20211227]]></pubDate></item>
<item>
<title><![CDATA[Laboratory and Industrial Vacuum Oven]]></title><link><![CDATA[https://yuanyaotech.en.ec21.com/Laboratory_and_Industrial_Vacuum_Oven--11621558_11621575.html]]></link><description><![CDATA[Under-phase protector.
2. Two-way over-temperature protector, automatic alarm and shutdown function when temperature overshoot.
3. The temperature has reached the timing and shutdown alarm function.
]]></description><pubDate><![CDATA[20220816]]></pubDate></item>
<item>
<title><![CDATA[Ultrasonic Lace Machine]]></title><link><![CDATA[https://jp60s.en.ec21.com/Ultrasonic_Lace_Machine--11026675_11026695.html]]></link><description><![CDATA[can be carried out at the same time. It makes the side smooth, no roughness and no coarse side.
· 
Make holes 
The holes with different patterns can be cut and the treatment of side melting can be c]]></description><pubDate><![CDATA[20191109]]></pubDate></item>
<item>
<title><![CDATA[Multipurpose Fiber Feeder for Road Construction]]></title><link><![CDATA[https://jiewoo01.en.ec21.com/Multipurpose_Fiber_Feeder_for_Road--11169841_11169872.html]]></link><description><![CDATA[can be connected
to 24v-220v control voltage. 
4. The discharging hole of the multipurpose
fiber feeder extends to the work chutes in the mixing cylinder, add a guide
corner , and an external materia]]></description><pubDate><![CDATA[20200610]]></pubDate></item>
<item>
<title><![CDATA[Freeze Cryogenic Pulverizer]]></title><link><![CDATA[https://wtgrinderline.en.ec21.com/Freeze_Cryogenic_Pulverizer--11009844_11028351.html]]></link><description><![CDATA[can be adjusted to select the best ground temperature and reduce energy consumption. Grinding fineness can reach 10-700 mesh, even to the fineness of micron and so on. Use liquid as the grinding medi]]></description><pubDate><![CDATA[20210610]]></pubDate></item>
<item>
<title><![CDATA[CNC Machining Polycarbonate]]></title><link><![CDATA[https://ysrapid01.en.ec21.com/CNC_Machining_Polycarbonate--11777230_11908766.html]]></link><description><![CDATA[be operated under transparent and intuitive conditions. In medical equipment that needs repeated disinfection, such as the production of high-pressure syringes, surgical masks, disposable dental appl]]></description><pubDate><![CDATA[20240305]]></pubDate></item>
<item>
<title><![CDATA[Commercial Vacuum Fruit Apple Noni Mango Juice Concentrate Machine Production Equipment]]></title><link><![CDATA[https://jnban733.en.ec21.com/Commercial_Vacuum_Fruit_Apple_Noni--11590864_11785622.html]]></link><description><![CDATA[can also be reused.
Product Overview
Equipment advantages:The company has extensively combined the advantages of concentrating equipment and other industry concentrating equipment, and combined with ]]></description><pubDate><![CDATA[20230509]]></pubDate></item>
<item>
<title><![CDATA[Top Quality CNC Router for Stone]]></title><link><![CDATA[https://hopetool1129.en.ec21.com/Top_Quality_CNC_Router_for--11604569_11604719.html]]></link><description><![CDATA[reach 35 m / min or more, against the wave plate is carved in manufacturing can be up to 20 m / min above the speed equivalent to the purchase of 4 -- 5 ordinary type machines. 2. intelligent protect]]></description><pubDate><![CDATA[20220718]]></pubDate></item>
<item>
<title><![CDATA[Bushing/Sleeve]]></title><link><![CDATA[https://hhcprecision.en.ec21.com/Bushing_Sleeve--11858667_11882709.html]]></link><description><![CDATA[be assessed. These properties can be evaluated through standardized testing methods, including hardness testing (e.g., Rockwell or Brinell) and tensile testing.
Specification of Bushing
Material
Iron]]></description><pubDate><![CDATA[20240102]]></pubDate></item>
<item>
<title><![CDATA[PGZ Scraper Discharge Automatic Centrifuge]]></title><link><![CDATA[https://huadacentrifuge.en.ec21.com/PGZ_Scraper_Discharge_Automatic_Centrifuge--3980713_3980725.html]]></link><description><![CDATA[be filtered by the filter liner under the centrifugal force. The liquid flows out through the liquid outlet, but solids deposit on the internal wall of the basket. Once the solids cake reaches the ho]]></description><pubDate><![CDATA[20140923]]></pubDate></item>

</channel>
</rss>