Electronics Cable Wholesale

Hepa Filter PU Dosing Gluing Machine

• Place of origin:  

  China

Electronic parts, integrated circuits, circuit board solder paste, fixed and dust and moisture protection,LCD liquid crystal screen, speakers, headphone, audio, LED, optical lens, SMD transformers, relays.2. Communication Products: Keypad, mobile phone casing bonding, radio, telephone, Computers, MP4, electronic toys, chassisbonding, switches, connectors, plug cable. Advantage of dispenser robotD

[Related Keywords : Silicone Dispensing Machine, glue potting machine, epoxy resin mixing, pu dispenser]

On-line Monitoring of Current Temperature and Faults

• Min. Order:  

  1 Set

• Price:  

  US$ 2

• Place of origin:  

  China

• Supply Ability:  

  50000 Setsper month

Cable current / temperature test range in real time 1A~10000A / -40℃~120℃ Working power supply ER14505 Industrial lithium battery3.6v External power supply DC5~18V, current less than 5mA The machine power consumption standby current ≤5 u A Protection grade The host; IP 40 Electronic；IP 65’ Short circuit current sensor maximum current 20 k A 4 s The host work environment -40℃~75℃ Com

[Related Keywords : On-line Monitoring Instrument, Current Temperature, Fault Sensors]

Combined Wire Drawing Machine LZ2/800+LT8-13/650

• Min. Order:  

  1 Set

• Price:  

  US$ 3000 ~ 700000

• Place of origin:  

  China

cable manufacturing. Specifications of Combined Wire Drawing Machine LZ2/800+LT8-13/650 Item Unit Data Maximum diameter of inlet wire mm φ10 Minmum diameter of oulet wire mm φ4.0- φ2.3 Drawing line speed m/min 180-200 Inlet tensile strength Mpa ≤1150 Total compression rate % 84-95 Average compression rate % 17-18 Motor power Kw 55x2+160 Dimersions mm 11000x4000x2000 Working Principles of Com

[Related Keywords : fastener equipment]

3D Printer Wiring Harness

• Min. Order:  

  100 Piece

• Price:  

  US$ 0.05 ~ 50

• Place of origin:  

  China

• Supply Ability:  

  1000000pcs per month

of 3D Printer Wiring Harness 19mm series metal light switch JFLO JF-15 series tow chain Ul1332-18/14awg wire MOLEX5557 series connector TE high current connection terminal If you need any kinds of wire harness & cable assembly manufacturing , please contact us, as a professional bespoke cable manufacturers , Holly Electronics is willing to offer you high quality products.

[Related Keywords : 3d printed wiring harness]

AG-26 Magnetic Cylinder Sensor

• Min. Order:  

  50 Box

• Price:  

  US$ 100

• Place of origin:  

  China

Cable Φ2.2, 2C, Grey Oil-Resistant PUR Φ2.2, 3C, Grey Oil-Resistant PUR Sensitivity 40～800 Gauss 40～800 Gauss Sensor Frequency 900Hz 900Hz Temperature -10～70℃ -10～70℃ Shock 50G 50G Vibration 9G 9G Ingress Protection IP68 (GB/T4208-2017) IP68 (GB/T4208-2017) Protection Circuit Surge Suppression Power Reverse Polarity; Surge Suppression CE Certificate NO. E8A 17 04 53334 007 E8A 17 04

[Related Keywords : sensor cylinder]

Box Build Assembly

• Min. Order:  

  100 Set

• Price:  

  US$ 300

• Place of origin:  

  China

Cable Assembly, Metal Parts & Plastic Parts Manufacturing and Assembly GreensTone provide standard and simple wiring harness assembly, or custom wire harnesses assembly and cable assembly at shortest turnaround times. Provide plastic parts and metal parts in standard like screw, caps, connectors, sockets, spring, washer, brass connector and so on, also provide these parts in custom as customer's

[Related Keywords : Box Build Assembly]

ZG-UHF Series 3.2KW To 12KW /200-1100KHz Ultra-High Frequency Induction Heating Brazing Machine (Wat

• Place of origin:  

  China

cables and split-type induction rings to welded at the scene away from the power supply. Inductional welding has the advantages of high heating, high productivity, stable operation, continuous work of 24 hours, and high welding quality. It has automatic and manual welding functions, and its operation is simple and practical. Inductional welding is the first choice for products with large output.

[Related Keywords : Induction Heater]

Connector Assembly Machine

• Min. Order:  

  1 Set

• Price:  

  US$ 2000 ~ 5000

• Place of origin:  

  China

electronic parts such as microcontrollers and touchscreens, which require PCB boards, wires, and cables for their functioning. The materials used to manufacture connector assemble machines should have high durability, heat resistance, and conductivity to meet the requirements of the electrical and electronic industries. HOW TO USE CONNECTOR ASSEMBLY MACHINE? Check all required components and make

[Related Keywords : connector assembly machin]

International Electrotechnical Commission IEC754

CABLES PART 2: DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING pH & CONDUCTIVITY Cable users have expressed concern over the amount of acid gas which is evolved when cable insulating, sheathing and other materials are burnt as this acid can cause extensive damage to electrical and electronic equipment not involved in t

[Related Keywords : International Electrotechnical Commission]

Active harmonic filter, single phase

heating end damage of neutral cable Prevents damage to breaker, fuse, reactor, capacitor Prevents sensitive equipment of noise Increasing the load capability of the transformers Improve power factor and reduce system loss Minimize interference with other equipment Application Case Dimensions of SPC Type SPC 15 SPC 20 Rraing Current(A) 15 30 Dimensions (mm) W 483 483 D 420 420 H 220 220

[Related Keywords : power conditioner, power quality, active harmonic filter]

WDW-S01/02/05 Electronic Tensile Testing Machine

• Min. Order:  

  1

• Place of origin:  

  China

cable to metal, cementing compound, tubes and pipes, sectional bar, aerospace, petrochemical industry,l waterproof rolls, wires and cables, fiber, rubber, ceramics, food, medical package, geotextile, film, wood, paper and other manufacturing industries and quality supervision department. It is also used in colleges for teaching demonstration. âÂÂÂÂ…¡.Ma

[Related Keywords : tensile testing machine, tensile tester, universal testing machine, universal tensile tester]

Induction Preheating

• Min. Order:  

  1 Set

• Price:  

  US$ 1000

• Place of origin:  

  China

cable for different sizes/shapes workpieces, and exact control of the preheat temperature for welding and the heating time. Hence, the induction heating equipment produced by JKZ Electronic is a very suitable heating power source in the pre-weld heat treatment process, especially for oil/gas pipes welding, chemical tank repair and the welding of large-sized special-shaped workpieces. The inducti

[Related Keywords : induction heating power s]

300w DC To AC Inverter

• Place of origin:  

  China

electronics like curling iron, laptop, hair straighter, drone, cordless power tool chargers and other appliances that require up to 300W. Our 300W DC to AC inverter can provide less electric noise, less damage to your device work with and better compatibility than modified sine wave inverter. For safety, please purchases are based on continuous power output and make sure the total wattage of all

[Related Keywords : inverter company]

Polyimide Varnish

• Place of origin:  

  Korea

Features after film cure Superior heat-resistant, Humidity-resistance Dimensional stability ight Designed for the requests of light weight Excellent flexible endurance Good flame retardant and chemical resistance Application Electronic material : FCCL, Covering materials, Package PCB Semiconductor materials : Buffer coat, LSI, Passivation Optics cable, Vacuum equipment, IC test socket, etc.

[Related Keywords : Manufacturing technologies, PICOMAX, Polyimide varnish, Thermosetting Polyimide]

Wire and Cable Separation and Recycling Equipment

• Min. Order:  

  1

• Price:  

  CNY 10

• Place of origin:  

  China

• Price Condition:  

  FOB Negotiable

Wire and cable separation and recycling equipment The technology is mainly used for various waste copper electric wire communication cable, aluminum wire,electrical and electronic waste miscellaneous line, automobile and motorcycle miscellaneous line, copper-plastic compounds and so on.The materials are separated and recycled by the following process:loading,crushing,storage,feeding, decompositi

[Related Keywords : Waste wire recycling equipment, Wire cable separation, Waste wire recycling, Waste wire separation]