<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - off on switch]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/off_on_switch--2673/1/off on switch.html]]></link><item>
<title><![CDATA[Rectifier Power Supply for Brush Plating, Constant Voltage Power Supply with Ampere Metering Functio]]></title><link><![CDATA[https://creview.en.ec21.com/Rectifier_Power_Supply_for_Brush--12015860_12015871.html]]></link><description><![CDATA[switch on the rear panel is used to switch on the 220V/50Hz (or 60Hz) AC power, push up (close) the switch to switch on the external 220V AC input. Pull down (off) the switch to disconnect the extern]]></description><pubDate><![CDATA[20260415]]></pubDate></item>
<item>
<title><![CDATA[SDVC21-XLP Variable Voltage Digital Controller for Vibratory Feeder]]></title><link><![CDATA[https://cuhvibratoryfeeder.en.ec21.com/SDVC21_XLP_Variable_Voltage_Digital--12004202_12032899.html]]></link><description><![CDATA[Switch Sensor ON/OFF Control: 2 NPN switch sensors or PLCs can be connected to turn on /off the controller.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connec]]></description><pubDate><![CDATA[20241224]]></pubDate></item>
<item>
<title><![CDATA[Pneumatic Actuated Flanged Floating Cutting-off Ball Valve]]></title><link><![CDATA[https://wangtina2.en.ec21.com/Pneumatic_Actuated_Flanged_Floating_Cutting--12001320_12002220.html]]></link><description><![CDATA[Pneumatic Flanged Floating Ball Valve ( GZSHO)
O type pneumatic cut-off ball valve is often assemble with pneumatic double acting actuators. It has the advantages of simple structure, small volume, l]]></description><pubDate><![CDATA[20240910]]></pubDate></item>
<item>
<title><![CDATA[Synchronous Protection Device SYN5201A-Z V217 3BHB006714R0217]]></title><link><![CDATA[https://wwww666666.en.ec21.com/Synchronous_Protection_Device_SYN5201A_Z--11939088_11950413.html]]></link><description><![CDATA[on a uniform, clean, and dry surface to set the DIP switch as required.
　　3. Turn off the VME bus rack.
　　4. Use the two sliding elements (handles) between the thumb and index finger to hold ]]></description><pubDate><![CDATA[20240612]]></pubDate></item>
<item>
<title><![CDATA[IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment]]></title><link><![CDATA[https://pegoelectronics.en.ec21.com/IEC60529_IPX5_and_IPX6_Jet--11940576_11941014.html]]></link><description><![CDATA[on and power off time can be controlled: off (0~999min)-on (0~999min)-off (o-999min).
● Test time can be set at the touch screen. Time setting range: 0~999min (adjustable), auto shut down when fini]]></description><pubDate><![CDATA[20240522]]></pubDate></item>
<item>
<title><![CDATA[Laser Marking Card]]></title><link><![CDATA[https://hansscanner.en.ec21.com/Laser_Marking_Card--11551491_11551499.html]]></link><description><![CDATA[on-the-fly (trial) function. 
The user can use upper computer software to switch laser scan head protocol. 
Communicate with marking software through high-speed Ethernet, to improve data communicatio]]></description><pubDate><![CDATA[20220408]]></pubDate></item>
<item>
<title><![CDATA[20khz Ultrasonic Plastic Welding Machine for PVC, PP, PE, ABS, Etc]]></title><link><![CDATA[https://shanghairuimin.en.ec21.com/20khz_Ultrasonic_Plastic_Welding_Machine--11834851_11834872.html]]></link><description><![CDATA[off the power switch on the panel of
the machine after each work is completed, and then turn off the main power switch after five minutes.
2. Lubricate the machine running-in place regularly.
3. The ]]></description><pubDate><![CDATA[20230817]]></pubDate></item>
<item>
<title><![CDATA[Aluminum V-Notch Cutting Machine]]></title><link><![CDATA[https://pipepunching.en.ec21.com/Aluminum_V_Notch_Cutting_Machine--11917366_11921618.html]]></link><description><![CDATA[on the foot switch, and the pneumatic clamp first clamp the aluminum profile in place, then the saw blade is activated to move down, cutting a V-shaped notch in the profile at a 90-degree angle.
The ]]></description><pubDate><![CDATA[20240407]]></pubDate></item>
<item>
<title><![CDATA[Resistance Seam Welding]]></title><link><![CDATA[https://ningboxihe.en.ec21.com/Resistance_Seam_Welding--11654442_11741278.html]]></link><description><![CDATA[switching the power source on and off at specific intervals during the process.
IMPORTANT ISSUES OF RESISTANCE SEAM WELDING
1
The heat source is usually electrical which may be supplied by an arc gen]]></description><pubDate><![CDATA[20230306]]></pubDate></item>
<item>
<title><![CDATA[Small Distilled Water Equipment Household]]></title><link><![CDATA[https://xxx1234567.en.ec21.com/Small_Distilled_Water_Equipment_Household--11878335_11879530.html]]></link><description><![CDATA[USE: 
Medical/Dental/Household/Laboratory/Beauty
FEATURE: 
1.Have an ON/OFF switch button, no need unplug the power code for stop the machine, easy
and safety. 
2.Have an Fuse Holder with 2XF10A, it ]]></description><pubDate><![CDATA[20231225]]></pubDate></item>
<item>
<title><![CDATA[HOT &amp; COLD WATER PURIFIER(Big Water Tanks) : HB-510]]></title><link><![CDATA[https://mudeposon.en.ec21.com/HOT_COLD_WATER_PURIFIER_Big--11818689_11818690.html]]></link><description><![CDATA[◈ LED Display Panel.
◈ Hot water
on/off switch on the backside of water purifier.
◈ Safety
button for children.
◈ Cocks made
by antibioticmaterials.
◈ Stainless steel water tanks and burrin]]></description><pubDate><![CDATA[20230713]]></pubDate></item>
<item>
<title><![CDATA[Guardrail Roll Forming Machine]]></title><link><![CDATA[https://hzrollforming.en.ec21.com/Guardrail_Roll_Forming_Machine--11257491_11257507.html]]></link><description><![CDATA[on personnel.
6.The automatic program control technology is adopted, the parameter setting is simple and convenient, the degree of automation is high, the system is self-learning ability is strong, t]]></description><pubDate><![CDATA[20200914]]></pubDate></item>
<item>
<title><![CDATA[WFM Micro Fine Vibration Grinder]]></title><link><![CDATA[https://wtgrinderline.en.ec21.com/WFM_Micro_Fine_Vibration_Grinder--11009844_11028349.html]]></link><description><![CDATA[on, let the crusher working
3: Open the sterilization switch
4: Setting the working time
8.ATTENTION
1: The master stop is mainly used for after working, press it, the machine will stop all work, or ]]></description><pubDate><![CDATA[20210610]]></pubDate></item>
<item>
<title><![CDATA[The Future of Visual Technology]]></title><link><![CDATA[https://highlystarelec.en.ec21.com/The_Future_of_Visual_Technology--11768092_11838272.html]]></link><description><![CDATA[on the glass substrate of the display. The transistors act as tiny switches, controlling the flow of current to each pixel on the screen.
Advantages of TFT Displays
TFT displays offer several advanta]]></description><pubDate><![CDATA[20230825]]></pubDate></item>
<item>
<title><![CDATA[2pcs Flybacks 100W CO2 HV Laser Power Supply 100watt HV CO2 PSU]]></title><link><![CDATA[https://zrsuns.en.ec21.com/2pcs_Flybacks_100W_CO2_HV--11839618_11840130.html]]></link><description><![CDATA[on/off of the laser power with a protective switch to check water-flow and ventilation.
3.This air cooling laser power supply unit has RED TEST button to easily figure out CO2 power supplies or CO2 l]]></description><pubDate><![CDATA[20230831]]></pubDate></item>
<item>
<title><![CDATA[SRA+VE     Series]]></title><link><![CDATA[https://tjfreya.en.ec21.com/SRA_VE_Series--9613629_9613844.html]]></link><description><![CDATA[switching volume control (also called distant manual control):
Switching volume control has three input ends: open valve, close valve and stop/remain. On-off control can realize &amp;lsquo;remain&amp;rsquo; ]]></description><pubDate><![CDATA[20150731]]></pubDate></item>
<item>
<title><![CDATA[Steel Billet Rolling,Steel Billet Rolling Equipment]]></title><link><![CDATA[https://inductinheating.en.ec21.com/Steel_Billet_Rolling_Steel_Billet--9931487_9934007.html]]></link><description><![CDATA[on or 
shut off. 
5.Perfect protective circuit and cooling system design, which ensure the good reliability 
of machine. 
6.Low energy consumption: Converts up to 97.5% above of the expended energy i]]></description><pubDate><![CDATA[20160416]]></pubDate></item>
<item>
<title><![CDATA[Open Mill and Refiner  XK550  XK400  XK660 XKJ-480]]></title><link><![CDATA[https://bjod.en.ec21.com/Open_Mill_and_Refiner_XK550--2032429_1894669.html]]></link><description><![CDATA[switching-off - a way of braking rolls no more than 0,25 revolutions roll (90 &amp;deg;) with simultaneous tap(removal) forward roll on distance not less than 25 mm.
Coupling connecting motor and rolls
C]]></description><pubDate><![CDATA[20150414]]></pubDate></item>
<item>
<title><![CDATA[Motor Housing Induction Heater Motor Frame Casing Profile Enclosure Motor Shell Cover Heater Stator]]></title><link><![CDATA[https://kitecn4057.en.ec21.com/Motor_Housing_Induction_Heater_Motor--2169952_10451066.html]]></link><description><![CDATA[on demand. In addition to the benefits of rapid availability in the event of a downstream interruption to production, the power can be switched off thus saving energy. (Published by Tony,mail: tudish]]></description><pubDate><![CDATA[20230811]]></pubDate></item>
<item>
<title><![CDATA[Motor Housing Induction Heater Motor Frame Casing Motor Profile Shell Heater Assembly Shrink Fitting]]></title><link><![CDATA[https://sijinhe1234567.en.ec21.com/Motor_Housing_Induction_Heater_Motor--2992186_10451693.html]]></link><description><![CDATA[on demand. In addition to the benefits of rapid availability in the event of a downstream interruption to production, the power can be switched off thus saving energy. (Published by Tony,mail: tudish]]></description><pubDate><![CDATA[20230816]]></pubDate></item>
<item>
<title><![CDATA[Labor Protection Gloves Dipping Machines Factories]]></title><link><![CDATA[https://kitchentowelmachine.en.ec21.com/Labor_Protection_Gloves_Dipping_Machines--10692891_10706953.html]]></link><description><![CDATA[switch, improve the accuracy of temperature control, so as to improve the product percent of pass.
3,Special design of the elasticity of the piston mold connection device, mould replacement is simple]]></description><pubDate><![CDATA[20221101]]></pubDate></item>
<item>
<title><![CDATA[Micro Flame Welder with Gas Output Up To 600 Liter/Hour]]></title><link><![CDATA[https://ho1986.en.ec21.com/Micro_Flame_Welder_with_Gas--5174903_6227343.html]]></link><description><![CDATA[switches off automatically ; Once in the low pressure condition arising the machine switches on automatically. 
- current adjusting valve adjusts current of electrolytic cells and gas production rate]]></description><pubDate><![CDATA[20180918]]></pubDate></item>
<item>
<title><![CDATA[Micro Flame Welder Max. 600 Liter/Hour Gas Output]]></title><link><![CDATA[https://21stcenturyjindian.en.ec21.com/Micro_Flame_Welder_Max._600--5454730_5454889.html]]></link><description><![CDATA[switches off automatically ; Once in the low pressure condition arising the machine switches on automatically. 
- current adjusting valve adjusts current of electrolytic cells and gas production rate]]></description><pubDate><![CDATA[20180918]]></pubDate></item>
<item>
<title><![CDATA[Wall Controller with Touch Buttons]]></title><link><![CDATA[https://viewpu.en.ec21.com/Wall_Controller_with_Touch_Buttons--9226211_9867719.html]]></link><description><![CDATA[on/off 
2、 button：parameter increase 
3、 button：parameter reduce 
4、 button：parameter setting 
5、 button：switch working mode 
Specification： 
* Dimension: 120&amp;times;120&amp;times;52mm *]]></description><pubDate><![CDATA[20160406]]></pubDate></item>
<item>
<title><![CDATA[NT6800WNR 6 Relay DO 8 Isolated Input DI Communicate by RJ45 Network or Wi-Fi Support Modbus-TCP]]></title><link><![CDATA[https://nitwoken.en.ec21.com/NT6800WNR_6_Relay_DO_8--8351974_9477854.html]]></link><description><![CDATA[ON)
&gt; Plug-able high current terminals, convenient for wiring and changing position
Operating mode configuration switch description (able to custom as client&apos;s need) 
S1 OFF: All relay state is off w]]></description><pubDate><![CDATA[20210125]]></pubDate></item>
<item>
<title><![CDATA[Pit Heating Furnace]]></title><link><![CDATA[https://chenchr.en.ec21.com/Pit_Heating_Furnace--9381136_9855889.html]]></link><description><![CDATA[switches open and close the lid when the lid is opened, the power is automatically cut off. 
Each pit furnace heating zones are equipped with two thermocouples for temperature control with a one for ]]></description><pubDate><![CDATA[20160213]]></pubDate></item>
<item>
<title><![CDATA[ZY-10(600L/H) Vacuum Insulating Oil Purifier]]></title><link><![CDATA[https://nakinpurifierwu.en.ec21.com/ZY_10_600L_H_Vacuum--8893388_8893389.html]]></link><description><![CDATA[switch oil and so on. Series ZY can remove water, trace water, gas, particles from oil quickly and effectively, improving oil dielectric strength. Also, this oil purifier can be used to power equipme]]></description><pubDate><![CDATA[20170607]]></pubDate></item>

</channel>
</rss>