<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - on off]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/on_off--2673/1/on off.html]]></link><item>
<title><![CDATA[On/Off Mounting Collar]]></title><link><![CDATA[https://quintapie.en.ec21.com/On_Off_Mounting_Collar--11774634_11839744.html]]></link><description><![CDATA[On/off Mounting Collar
FLOW: 006144-1
H2O: 100040-1
Accustream: 1-13991
Paser 3
]]></description><pubDate><![CDATA[20230830]]></pubDate></item>
<item>
<title><![CDATA[Water Hammer Arrester]]></title><link><![CDATA[https://gtijames7.en.ec21.com/Water_Hammer_Arrester--12059044_12059052.html]]></link><description><![CDATA[off valve is closed. It is usually installed on top of the pump and/or the end of the fire pipe in parking space. Its volume appropriateness and reliability have been proved through 200,000 cycle tes]]></description><pubDate><![CDATA[20250821]]></pubDate></item>
<item>
<title><![CDATA[Rectifier Power Supply for Brush Plating, Constant Voltage Power Supply with Ampere Metering Functio]]></title><link><![CDATA[https://creview.en.ec21.com/Rectifier_Power_Supply_for_Brush--12015860_12015871.html]]></link><description><![CDATA[on the rear panel is used to switch on the 220V/50Hz (or 60Hz) AC power, push up (close) the switch to switch on the external 220V AC input. Pull down (off) the switch to disconnect the external AC i]]></description><pubDate><![CDATA[20260415]]></pubDate></item>
<item>
<title><![CDATA[Passivation Roll Coater for Color Coating Line]]></title><link><![CDATA[https://asconone.en.ec21.com/Passivation_Roll_Coater_for_Color--11965028_11998324.html]]></link><description><![CDATA[Function
The function of roll coater is applying a thin coating film of a trivalent Chrome compound on the 
plate surface in order to protect it against the corrosion.
Description
During the process,]]></description><pubDate><![CDATA[20250729]]></pubDate></item>
<item>
<title><![CDATA[WEST CAL E6C Temperature &amp; Process Controller]]></title><link><![CDATA[https://automate.en.ec21.com/WEST_CAL_E6C_Temperature_Process--4146634_11867163.html]]></link><description><![CDATA[On-Off control, Heat Only or Heat &amp; Cool
Output Configuration : Output 1 &amp; 2;
Relay or SSR drive. Output 3; Relay, SSR drive, Linear DC (mA/V), RS485 Comms
HMI : 4 button operation, dual 4 digit 10mm]]></description><pubDate><![CDATA[20250401]]></pubDate></item>
<item>
<title><![CDATA[Gemstone Chamfering Equipment Machine]]></title><link><![CDATA[https://dt2009.en.ec21.com/Gemstone_Chamfering_Equipment_Machine--3731650_3731688.html]]></link><description><![CDATA[on the modification immediately according to the customer request.
Gem Chamfering Equipment
Main Parameters:
Voltage: AC220V/380V
Power: 750-1100W
Working frequency: 60Hz 
Rotation speed: 852r/min
Di]]></description><pubDate><![CDATA[20250324]]></pubDate></item>
<item>
<title><![CDATA[X-1dry Ice Machine]]></title><link><![CDATA[https://djpowerfx.en.ec21.com/X_1dry_Ice_Machine--11941313_12038403.html]]></link><description><![CDATA[on, 10 minutes of run time when 50% output;
All stainless-steel metal parts, firm, durable and extremely low failure rate;
Easy to pour out the remaining water after use;
Increase safety with low-wat]]></description><pubDate><![CDATA[20250121]]></pubDate></item>
<item>
<title><![CDATA[Plasma Discharge Electrodes Copper-Wrapped Tungsten Electrodes F4 Plasma Spray]]></title><link><![CDATA[https://reframetals.en.ec21.com/Plasma_Discharge_Electrodes_Copper_Wrapped--12016380_12037433.html]]></link><description><![CDATA[on tools and various equipment components. When used in spray guns, our electrodes must be able to withstand instantaneous plasma temperatures exceeding 12,000°C.
This instantaneous high temperature]]></description><pubDate><![CDATA[20250117]]></pubDate></item>
<item>
<title><![CDATA[3-20LPM Oxygen Generator]]></title><link><![CDATA[https://qjozonetech.en.ec21.com/3_20LPM_Oxygen_Generator--11938412_12036992.html]]></link><description><![CDATA[On/Off, Oxygen flow meter, Voltmeter, Oxygen outlet, Fuse, Power input.
SPECIFICATIONS
3-20LPM oxygen generator
Model
Unit
QJ-OX3L
QJ-OX5L
QJ-OX10L
QJ-OX15L
QJ-OX20L
Oxygen flow rate
LPM
3
5
10
15
20]]></description><pubDate><![CDATA[20250115]]></pubDate></item>
<item>
<title><![CDATA[Mimaki JV150-130 Wide Format Solvent Printer]]></title><link><![CDATA[https://mantis27.en.ec21.com/Mimaki_JV150_130_Wide_Format--12033369_12033373.html]]></link><description><![CDATA[on time. Prints perfect like a champ. Print Head in perfect shape. See picture of print test. Looks like brand new. Used only to print motorcycle graphics.
For full specs please visit the link below.]]></description><pubDate><![CDATA[20241227]]></pubDate></item>
<item>
<title><![CDATA[SDVC40-S Variable Frequency Digital Controller for Piezo Vibratory Feeder]]></title><link><![CDATA[https://cuhvibratoryfeeder.en.ec21.com/SDVC40_S_Variable_Frequency_Digital--12004202_12032905.html]]></link><description><![CDATA[on to avoid sudden shake. Soand and an be
digitally preset.
Switch Sensor ON/OFF Control: 1 NPN switch sensor PLC can be connected to turn on/off the controller.
Photoelectric Sensor ON/OFF Control: ]]></description><pubDate><![CDATA[20241224]]></pubDate></item>
<item>
<title><![CDATA[Differential Air Shaft for Slitter Machine]]></title><link><![CDATA[https://huiyuan168.en.ec21.com/Differential_Air_Shaft_for_Slitter--10585081_10591209.html]]></link><description><![CDATA[off.
Fit the shouter axis,winding excellence.
To achieve extremely low tension-friction,have application in the thinnest(10U) PET film,electronic film splitting.
Very successfully used in lithium bat]]></description><pubDate><![CDATA[20241023]]></pubDate></item>
<item>
<title><![CDATA[Rice Cooker Tubular Heater Winding Machine]]></title><link><![CDATA[https://osneq.en.ec21.com/Rice_Cooker_Tubular_Heater_Winding--12017287_12017288.html]]></link><description><![CDATA[on the touch screen as required, winding can be performed automatically. After winding to the preset resistance , automatically cuts off and automatically clears, and repeats continuous work. This ma]]></description><pubDate><![CDATA[20241014]]></pubDate></item>
<item>
<title><![CDATA[Automatic Cutter for Heat Shrink Tubing Silicone Rubber Tube Medical Hose Cut To Length]]></title><link><![CDATA[https://yueyeuniao1112.en.ec21.com/Automatic_Cutter_for_Heat_Shrink--10737675_10737311.html]]></link><description><![CDATA[off
&amp; on.
8. Application: Sleeve, rubber/plastic tube, small wire, sheet, film, etc.
9. High speed, high accuracy, designed for cutting non-adhesive materials.
Description:
Model: 100 (can be custom
]]></description><pubDate><![CDATA[20240915]]></pubDate></item>
<item>
<title><![CDATA[Pneumatic Actuated Flanged Floating Cutting-off Ball Valve]]></title><link><![CDATA[https://wangtina2.en.ec21.com/Pneumatic_Actuated_Flanged_Floating_Cutting--12001320_12002220.html]]></link><description><![CDATA[Pneumatic Flanged Floating Ball Valve ( GZSHO)
O type pneumatic cut-off ball valve is often assemble with pneumatic double acting actuators. It has the advantages of simple structure, small volume, l]]></description><pubDate><![CDATA[20240910]]></pubDate></item>
<item>
<title><![CDATA[Metal Seated Trunnion Ball Valve]]></title><link><![CDATA[https://larphy.en.ec21.com/Metal_Seated_Trunnion_Ball_Valve--12001280_12001316.html]]></link><description><![CDATA[on the sealing surface of the metal hard sealed wedge ball valve, and the use of high-temperature and corrosion-resistant materials for the packing and gasket, the sealing performance of the valve ca]]></description><pubDate><![CDATA[20240909]]></pubDate></item>
<item>
<title><![CDATA[CNC Mill Automation System, Dual Multi-grip Vises, 56 X 32 Table, Includes Ur10e Cobot]]></title><link><![CDATA[https://machineryconnection1.en.ec21.com/CNC_Mill_Automation_System_Dual--11997980_11997984.html]]></link><description><![CDATA[On Road and Off road transportation vehicles 
VFD, PLC, HMI, Control Equipments and Automation Systems
Earth moving machinery and excavator
Multi Passenger Elevators and Escalators
Building &amp; Constru]]></description><pubDate><![CDATA[20240904]]></pubDate></item>
<item>
<title><![CDATA[Mechanic S24 Max Power Boot Cable for Iphone Android]]></title><link><![CDATA[https://diyfixtoolci.en.ec21.com/Mechanic_S24_Max_Power_Boot--11998304_11998310.html]]></link><description><![CDATA[on the market.Features:1. Support Apple iPhone Series: iPhone 5S/6/6S/6P/6SP/7/7P/8/8P/X/XR/XS/XS MAX/11/11 Pro/11 Pro MAX/12/12 Pro/12 Pro Max/12 Mini/13/13 Pro/13 Pro Max/13 Mini.2. Support Android]]></description><pubDate><![CDATA[20240904]]></pubDate></item>
<item>
<title><![CDATA[Corn Dry Machine Maize Dry Machine]]></title><link><![CDATA[https://qingshannj.en.ec21.com/Corn_Dry_Machine_Maize_Dry--9855828_10107976.html]]></link><description><![CDATA[off the moisture of the grain. Then the exhaust gas is excluded out of the machine by the exhaust fan when the moisture reaching to the set value, the machine stops working.a.latest international mix]]></description><pubDate><![CDATA[20240820]]></pubDate></item>
<item>
<title><![CDATA[Heating Oven]]></title><link><![CDATA[https://hengjiujinye.en.ec21.com/Heating_Oven--11982428_11982656.html]]></link><description><![CDATA[Industrial Oven: This content is for customer reference only and can be customized according to customer process requirements based on size and temperature requirements.
Specification parameters: HJJ]]></description><pubDate><![CDATA[20240809]]></pubDate></item>
<item>
<title><![CDATA[Screen Printing Mesh Mechine Metal Wire Mesh Weaving Machine Wire Cloth Loom]]></title><link><![CDATA[https://lanyingmachine.en.ec21.com/Screen_Printing_Mesh_Mechine_Metal--11822889_11824644.html]]></link><description><![CDATA[off and precision tension control algorithm can display the tension in real time and automatically adjust the mesh surface tension; CNC 3-roller take-up structure can realize non-stop mesh removal at]]></description><pubDate><![CDATA[20240716]]></pubDate></item>
<item>
<title><![CDATA[Highly Precise Fully Automatic Non-Stop 4 Spindle Shaft Turret Rewinder for Label Slitting Machinery]]></title><link><![CDATA[https://hengmingmachinery1.en.ec21.com/Highly_Precise_Fully_Automatic_Non--11947033_11952036.html]]></link><description><![CDATA[off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting &amp; rewinding and automatic label sticking, which can finish]]></description><pubDate><![CDATA[20240715]]></pubDate></item>
<item>
<title><![CDATA[Heavy Pneumatic Mesh Welding Machine]]></title><link><![CDATA[https://dingniumachines.en.ec21.com/Heavy_Pneumatic_Mesh_Welding_Machine--11072918_11072936.html]]></link><description><![CDATA[on Windows operating system, human-machine interface, intelligent operation, humanization.
The mesh size is precise, and different sizes of mesh holes can be found in the direction of warp and weft o]]></description><pubDate><![CDATA[20240712]]></pubDate></item>
<item>
<title><![CDATA[C85300 Bronze with Graphite Plugs Bearings:]]></title><link><![CDATA[https://viiplusbearing.en.ec21.com/C85300_Bronze_with_Graphite_Plugs--11082003_11082013.html]]></link><description><![CDATA[C85300 Bronze with Graphite Plugs Bearings: The Innovation in Oilless Bushing Technology by Bronzelube.com The mechanical industry is in a state of continuous evolution, spurred on by advancements in]]></description><pubDate><![CDATA[20240704]]></pubDate></item>
<item>
<title><![CDATA[GFSJ Hammer Grinder Fruit Grinder Machine]]></title><link><![CDATA[https://wtgrinderline.en.ec21.com/GFSJ_Hammer_Grinder_Fruit_Grinder--11009844_11009846.html]]></link><description><![CDATA[on the hoop, angled with the horizontal line. This ensures the even mixing effect. 
(2) The drum is fixed on the hoop and it can be taken off easily from the hoop. So normally, one or two drums are p]]></description><pubDate><![CDATA[20240625]]></pubDate></item>
<item>
<title><![CDATA[30k Cavitation Skin &amp; Body Care Machine]]></title><link><![CDATA[https://fgidj123456.en.ec21.com/30k_Cavitation_Skin_Body_Care--11953367_11953973.html]]></link><description><![CDATA[on your spa clients to remove stubborn fat.30K Cavitation Machine, pinching fat on abdomenIn what ways is our 30K machine better than others on the market? The Benefits:Newly upgraded 30K cavitation ]]></description><pubDate><![CDATA[20240619]]></pubDate></item>
<item>
<title><![CDATA[Synchronous Protection Device SYN5201A-Z V217 3BHB006714R0217]]></title><link><![CDATA[https://wwww666666.en.ec21.com/Synchronous_Protection_Device_SYN5201A_Z--11939088_11950413.html]]></link><description><![CDATA[on a uniform, clean, and dry surface to set the DIP switch as required.
　　3. Turn off the VME bus rack.
　　4. Use the two sliding elements (handles) between the thumb and index finger to hold ]]></description><pubDate><![CDATA[20240612]]></pubDate></item>
<item>
<title><![CDATA[Servo Motor Driver]]></title><link><![CDATA[https://oukecnc.en.ec21.com/Servo_Motor_Driver--11942988_11942996.html]]></link><description><![CDATA[off is a safety feature provided by many digital servo drives to immediately power down the motor without powering down the servo drive.
Automation drive allows high speed capture. High speed capture]]></description><pubDate><![CDATA[20240527]]></pubDate></item>
<item>
<title><![CDATA[IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment]]></title><link><![CDATA[https://pegoelectronics.en.ec21.com/IEC60529_IPX5_and_IPX6_Jet--11940576_11941014.html]]></link><description><![CDATA[on and power off time can be controlled: off (0~999min)-on (0~999min)-off (o-999min).
● Test time can be set at the touch screen. Time setting range: 0~999min (adjustable), auto shut down when fini]]></description><pubDate><![CDATA[20240522]]></pubDate></item>
<item>
<title><![CDATA[CK210 Small CNC Lathe]]></title><link><![CDATA[https://yornewmachine.en.ec21.com/CK210_Small_CNC_Lathe--11380514_11380519.html]]></link><description><![CDATA[on the design and manufacture, reflects the structural integrity of facilitate future design ideas.
(6). The standard spec includes MPG hand wheel.
(7). USB and RS232 port,
(8). Network interface, su]]></description><pubDate><![CDATA[20240518]]></pubDate></item>
<item>
<title><![CDATA[AWGAGE-200 Metal Film Metrology]]></title><link><![CDATA[https://allwin21.en.ec21.com/AWGAGE_200_Metal_Film_Metrology--9763377_9763394.html]]></link><description><![CDATA[on the carriage between the four locator blocks. The wafer will be centered over the circular platform that rotates the wafer.
Manual Mode: Press the MAN/AUTO button, so the LED is off. Momentarily p]]></description><pubDate><![CDATA[20240514]]></pubDate></item>
<item>
<title><![CDATA[Hobby CNC Metal Machines  Micro CNC Lathe Machine]]></title><link><![CDATA[https://yornew.en.ec21.com/Hobby_CNC_Metal_Machines_Micro--10330179_10330192.html]]></link><description><![CDATA[on the design and manufacture, reflects the structural integrity of facilitate future design ideas.(6). The standard spec includes MPG hand wheel.(7). USB and RS232 port, DNC function of USB.(8). Net]]></description><pubDate><![CDATA[20240507]]></pubDate></item>
<item>
<title><![CDATA[SG160/130-1JD Heavy-duty CNC Metal Wire Mesh Weaving Machine]]></title><link><![CDATA[https://wireweavingmachine.en.ec21.com/SG160_130_1JD_Heavy_duty--11151237_11151281.html]]></link><description><![CDATA[on the weaving width and detailed specifications.
l 
Heald frame and form ： hanging heald frame ( three kinds of structures are optional -Tappet hanging/harness heald，arch heald，servo dobby and]]></description><pubDate><![CDATA[20240507]]></pubDate></item>
<item>
<title><![CDATA[1325 Stone Carving Machine   Stone Cutting Machine China   Stone CNC Machine Suppliers]]></title><link><![CDATA[https://cncroutercn.en.ec21.com/1325_Stone_Carving_Machine_Stone--11411124_11411135.html]]></link><description><![CDATA[on natural stone, glass, and ceramics. It can meet the requirements of personalized home decoration and tooling art design, and can be used as advanced engraving processing equipment for decoration c]]></description><pubDate><![CDATA[20240418]]></pubDate></item>
<item>
<title><![CDATA[FUNGOM Spray Paint Wholesale]]></title><link><![CDATA[https://fungom.en.ec21.com/FUNGOM_Spray_Paint_Wholesale--11921983_11921985.html]]></link><description><![CDATA[off after the plastic is sprayed.

Site Marking Spray Paint
Site Marking Spray Paint Extensive use of unique polymer materials, easy-to-use profiles, and other resin materials., using upside down ]]></description><pubDate><![CDATA[20240408]]></pubDate></item>
<item>
<title><![CDATA[Aluminum V-Notch Cutting Machine]]></title><link><![CDATA[https://pipepunching.en.ec21.com/Aluminum_V_Notch_Cutting_Machine--11917366_11921618.html]]></link><description><![CDATA[Aluminum V-Notch Cutting Machine is special customized equipment for cutting V-shaped notches at 90-degree angles on aluminum profiles. It is working to make aluminum frames for doors, windows, and o]]></description><pubDate><![CDATA[20240407]]></pubDate></item>
<item>
<title><![CDATA[Marine Lashing]]></title><link><![CDATA[https://zhongheindustry.en.ec21.com/Marine_Lashing--11839668_11921749.html]]></link><description><![CDATA[Marine lashing equipment
refers to a range of gear used to secure cargo on ships and barges during marine transportation. This equipment is designed to withstand the harsh conditions of maritime tran]]></description><pubDate><![CDATA[20240407]]></pubDate></item>
<item>
<title><![CDATA[Robot Fiber Laser Welding Machine with Seam Tracking System]]></title><link><![CDATA[https://cmbio12.en.ec21.com/Robot_Fiber_Laser_Welding_Machine--11774782_11775540.html]]></link><description><![CDATA[off with laser welding. Robotic laser welding has a much smaller heat-affected zone, so distortion is minimized regardless of the type of metal being welding.
Robotic laser welding is an accurate, cl]]></description><pubDate><![CDATA[20240318]]></pubDate></item>
<item>
<title><![CDATA[API Oilfield Wellhead Annular Blowout Preventer/BOP]]></title><link><![CDATA[https://machinery14.en.ec21.com/API_Oilfield_Wellhead_Annular_Blowout--9182239_9182250.html]]></link><description><![CDATA[on. 
Ram BOP is mainly composed of housing, side gate, hydro-cylinder, cylinder cap, piston, piston rod, lock shaft, sealing parts, ram, etc. Oil well&amp;#39;s sealing or opening is achieved by moving r]]></description><pubDate><![CDATA[20140912]]></pubDate></item>
<item>
<title><![CDATA[Automatic Horizontal Foam Cutting Machine]]></title><link><![CDATA[https://mattressmachines.en.ec21.com/Automatic_Horizontal_Foam_Cutting_Machine--11814598_11816069.html]]></link><description><![CDATA[off foam slice is no need of being taken away from working table after each cutting. Depending on cutting thickness and foam density, the cutting angle of the knife guidance can adjust from 0ﾟto 5]]></description><pubDate><![CDATA[20230706]]></pubDate></item>
<item>
<title><![CDATA[Declutchable Gear Box]]></title><link><![CDATA[https://juhang1.en.ec21.com/Declutchable_Gear_Box--11601080_11853725.html]]></link><description><![CDATA[On the contrary, to manual operation.●It can be installed with total gas safe control function, which cut off air source and exhaust automatically.
3.Product Details
4.Factory Workshop
Juhang has a]]></description><pubDate><![CDATA[20231012]]></pubDate></item>
<item>
<title><![CDATA[Metal Flue Gas Treatment System]]></title><link><![CDATA[https://sdngroups.en.ec21.com/Metal_Flue_Gas_Treatment_System--11906760_11906761.html]]></link><description><![CDATA[on the atomic-scale partial diffusion reaction synthesis technology, the pore structure can be accurately regulated at the micron/submicron level, so that the material has a uniform pore diameter dis]]></description><pubDate><![CDATA[20240227]]></pubDate></item>
<item>
<title><![CDATA[Fine Cutter Rough Cutter for Polishing]]></title><link><![CDATA[https://emily5186.en.ec21.com/Fine_Cutter_Rough_Cutter_for--10929246_9481321.html]]></link><description><![CDATA[off bug in process.
PDC, PCBN groove tool
All kinds
Groove tool main apply to kinds of axis and piston.
PCD, PCBN excircle turningtool
All kinds
Widely use to machine, electric machine, superhard pre]]></description><pubDate><![CDATA[20150708]]></pubDate></item>
<item>
<title><![CDATA[AS25  BS60]]></title><link><![CDATA[https://tjfreya.en.ec21.com/AS25_BS60--9613790_9613951.html]]></link><description><![CDATA[off signal protection
The actuator stop at the original, all-on or all-off position which is instructed by users as the signal is interrupted by accident or the input signal is less than 3mA (called ]]></description><pubDate><![CDATA[20150731]]></pubDate></item>
<item>
<title><![CDATA[CTS(B,N)Series Wet Permanent Magnetic Separator]]></title><link><![CDATA[https://jackhuang7921.en.ec21.com/CTS_B_N_Series_Wet--10163978_10163996.html]]></link><description><![CDATA[off and damage ,trouble -free operation .
On both sides of the tub with silt device ,cinvenient cleaning sedimentation in the tub .
Duck mouth wash pipe ,strong adaptability of water quality ,water p]]></description><pubDate><![CDATA[20160927]]></pubDate></item>
<item>
<title><![CDATA[R-8051/R-8051+ 16-Channel Isolated Digital Input Module]]></title><link><![CDATA[https://jane2015gemotech.en.ec21.com/R_8051_R_8051_16--10081766_10082088.html]]></link><description><![CDATA[Main Features 
- Input: 16-channel 
- Input Voltage: 50V (Maximum) 
- Input Voltage Level: 
Dry Contact: Logic Level 0:-OFF (close to GND); Logic Level 1:-ON; 
Wet Contact: Logic Level 0: +3V (Maximu]]></description><pubDate><![CDATA[20160727]]></pubDate></item>
<item>
<title><![CDATA[Multi-Functional Water Circulating Vacuum Pump]]></title><link><![CDATA[https://xataikang.en.ec21.com/Multi_Functional_Water_Circulating_Vacuum--9935656_9936726.html]]></link><description><![CDATA[off and on at any side. 
Features: 
(1) Adopts the double-tap, alone or in parallel with two vacuum tables. 
(2) The latest improved anti-corrosion four taps can be used alone or in parallel with fou]]></description><pubDate><![CDATA[20170216]]></pubDate></item>
<item>
<title><![CDATA[20khz Ultrasonic Plastic Welding Machine for PVC, PP, PE, ABS, Etc]]></title><link><![CDATA[https://shanghairuimin.en.ec21.com/20khz_Ultrasonic_Plastic_Welding_Machine--11834851_11834872.html]]></link><description><![CDATA[off the power switch on the panel of
the machine after each work is completed, and then turn off the main power switch after five minutes.
2. Lubricate the machine running-in place regularly.
3. The ]]></description><pubDate><![CDATA[20230817]]></pubDate></item>
<item>
<title><![CDATA[Steel Billet Rolling,Steel Billet Rolling Equipment]]></title><link><![CDATA[https://inductinheating.en.ec21.com/Steel_Billet_Rolling_Steel_Billet--9931487_9934007.html]]></link><description><![CDATA[on or 
shut off. 
5.Perfect protective circuit and cooling system design, which ensure the good reliability 
of machine. 
6.Low energy consumption: Converts up to 97.5% above of the expended energy i]]></description><pubDate><![CDATA[20160416]]></pubDate></item>
<item>
<title><![CDATA[Direct Drive Water Stripping Machine]]></title><link><![CDATA[https://dingqiao123.en.ec21.com/Direct_Drive_Water_Stripping_Machine--11802968_11802985.html]]></link><description><![CDATA[Use ultra-high pressure water (280MPA) to impact the photosensitive emulsion on the surface of the nickel screen, and peel off all the photosensitive emulsion on the surface of the nickel screen to a]]></description><pubDate><![CDATA[20230607]]></pubDate></item>

</channel>
</rss>