<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - open system]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/open_system--2673/1/open system.html]]></link><item>
<title><![CDATA[EO Gas Sterilizer]]></title><link><![CDATA[https://jeesung.en.ec21.com/EO_Gas_Sterilizer--4348431_4348437.html]]></link><description><![CDATA[Automatic E.O. GAS Sterilizer
E.O. Gas sterilizing Machines
Door opening and shutting device : Astoria system
Hot water circulation system
Operation mode : One tough automatic control system
Low-heat]]></description><pubDate><![CDATA[20260408]]></pubDate></item>
<item>
<title><![CDATA[Rubber Hanger]]></title><link><![CDATA[https://gtijames7.en.ec21.com/Rubber_Hanger--12059056_12059080.html]]></link><description><![CDATA[housing is strong enough to stand load transferred and avoid resonance. With the open rubber having a static deflection of 3.5~13 mm, it can maintain the system&apos;s natural frequency down to 5~12 Hz.]]></description><pubDate><![CDATA[20250822]]></pubDate></item>
<item>
<title><![CDATA[Passivation Roll Coater for Color Coating Line]]></title><link><![CDATA[https://asconone.en.ec21.com/Passivation_Roll_Coater_for_Color--11965028_11998324.html]]></link><description><![CDATA[opening with synchronization, front head actuated by hydraulic 
cylinders. There are pressure sensor used for roll pressure feedback and linear bearings for frame 
movement. This system is driven man]]></description><pubDate><![CDATA[20250729]]></pubDate></item>
<item>
<title><![CDATA[Vertical Cuttings Dryer]]></title><link><![CDATA[https://ogem3.en.ec21.com/Vertical_Cuttings_Dryer--9844602_9845564.html]]></link><description><![CDATA[openings, while “dry” solids are extracted by the angled flights attached to the cone, which 
rotate slightly slower than the bowl.
Features
1. The flights are made from hard high chrome alloy ma]]></description><pubDate><![CDATA[20250305]]></pubDate></item>
<item>
<title><![CDATA[Fully Automatic Bikini Period Pants Customized]]></title><link><![CDATA[https://womeng.en.ec21.com/Fully_Automatic_Bikini_Period_Pants--12045712_12045723.html]]></link><description><![CDATA[system
PLC control system,HMI Operating on the LED touch screen,Configure HDTV monitor
Drive system
Servo Drive(Easy to change size), timing belt and flat belt are import products, and all the key pa]]></description><pubDate><![CDATA[20250228]]></pubDate></item>
<item>
<title><![CDATA[GOANWIN GHD H-Frame High Speed Press for Precision Terminals, Connectors, Shrapnel, LED Brackets]]></title><link><![CDATA[https://goanwin.en.ec21.com/GOANWIN_GHD_H_Frame_High--12040893_12041140.html]]></link><description><![CDATA[system, and oil cooling, the GHD Series ensures minimal thermal deformation, reduced vibration, and extended press life, even under eccentric loads. This press is the perfect choice for industries re]]></description><pubDate><![CDATA[20250203]]></pubDate></item>
<item>
<title><![CDATA[Twin Screw Extruder for Powder Coating Made in China]]></title><link><![CDATA[https://haiyangdeli.en.ec21.com/Twin_Screw_Extruder_for_Powder--11646385_11646405.html]]></link><description><![CDATA[opens horizontally to facilitate cleaning and color changeb) Intense heat exchange and automatic temperature control system on screw barrelc) Flexible combination for the screw according to different]]></description><pubDate><![CDATA[20241028]]></pubDate></item>
<item>
<title><![CDATA[Ceiling Fan Rotor Casting Machine]]></title><link><![CDATA[https://osneq.en.ec21.com/Ceiling_Fan_Rotor_Casting_Machine--12017287_12017290.html]]></link><description><![CDATA[opening and closing the upper mold and ejecting the product.
Adopt Japanese Mitsubishi PLC control, easy to operate.
Using Taiwan&apos;s Shangyin guide rail, it has high precision and long service life.
T]]></description><pubDate><![CDATA[20241014]]></pubDate></item>
<item>
<title><![CDATA[Wire Conveyor Belts]]></title><link><![CDATA[https://botengwiremesh.en.ec21.com/Wire_Conveyor_Belts--12009795_12009827.html]]></link><description><![CDATA[systems made from interlinked metal wires, forming a sturdy and open mesh pattern. These belts are designed to facilitate the transport and processing of goods across various industrial settings. Due]]></description><pubDate><![CDATA[20240925]]></pubDate></item>
<item>
<title><![CDATA[Self Operated Temperature Regulating Valve]]></title><link><![CDATA[https://wangtina2.en.ec21.com/Self_Operated_Temperature_Regulating_Valve--12001320_12002775.html]]></link><description><![CDATA[system and temperature regulating system of automatic control systems in other industries, which may be used for automatic control of temperature of all kinds of heating exchange and cooling devices ]]></description><pubDate><![CDATA[20240911]]></pubDate></item>
<item>
<title><![CDATA[Froged Steel Npt SW Floating Ball Valve]]></title><link><![CDATA[https://larphy.en.ec21.com/Froged_Steel_Npt_SW_Floating--12001280_12002107.html]]></link><description><![CDATA[system, making installation and maintenance convenient. The flange sealing surface can be processed according to requirements to ensure sealing performance.
4. Floating ball design: The ball floats i]]></description><pubDate><![CDATA[20240910]]></pubDate></item>
<item>
<title><![CDATA[Air Pollution Control Equipment]]></title><link><![CDATA[https://quanduan2024.en.ec21.com/Air_Pollution_Control_Equipment--11999860_11999985.html]]></link><description><![CDATA[opens and closes based on operational status. During variable frequency debugging, the system pre-sets the corresponding frequency power for each valve&apos;s opening time, achieving automatic frequency c]]></description><pubDate><![CDATA[20240906]]></pubDate></item>
<item>
<title><![CDATA[Highly Precise Fully Automatic Non-Stop 4 Spindle Shaft Turret Rewinder for Label Slitting Machinery]]></title><link><![CDATA[https://hengmingmachinery1.en.ec21.com/Highly_Precise_Fully_Automatic_Non--11947033_11952036.html]]></link><description><![CDATA[system can be selected
4. Both Blank label and printed label are available
5. Precision cut in gap of finished label rolls
6. Servo motor control Mechanical arm automatic feeding system
7.Petal type ]]></description><pubDate><![CDATA[20240715]]></pubDate></item>
<item>
<title><![CDATA[Peek Film Forming Machine| Lab Twin-screw Extrusion and Casting Machine]]></title><link><![CDATA[https://potopyangliu.en.ec21.com/Peek_Film_Forming_Machine_Lab--11956821_11958149.html]]></link><description><![CDATA[system. The test material is first melted and homogenized by a precision twin-screw extruder, and then sent to the casting die at a constant speed by a melt pump. It is formed by a casting unit, and ]]></description><pubDate><![CDATA[20240627]]></pubDate></item>
<item>
<title><![CDATA[Horizontal Side Loading S1 Spark Plasma Sintering System]]></title><link><![CDATA[https://haoyuefurnace.en.ec21.com/Horizontal_Side_Loading_S1_Spark--11953323_11953324.html]]></link><description><![CDATA[Horizontal side loading S1 Spark Plasma Sintering System
Rapid heating and cooling, greatly shortening production time and reducing production costs (heating rate can reach 100 ~ 200℃ / min).
1.Sel]]></description><pubDate><![CDATA[20240618]]></pubDate></item>
<item>
<title><![CDATA[Main Control Board 500CIM05 1MRB150077R1/B]]></title><link><![CDATA[https://wwww666666.en.ec21.com/Main_Control_Board_500CIM05_1MRB150077R1--11939088_11948444.html]]></link><description><![CDATA[openings for the PMC module front panel. Includes a blind cover for unoccupied slots. Easy Expansion of VMEbus System ? 　　Add up to 2 PMC boards to your system ? Connect to site using P2-IO ? Ins]]></description><pubDate><![CDATA[20240612]]></pubDate></item>
<item>
<title><![CDATA[CNC Control System]]></title><link><![CDATA[https://oukecnc.en.ec21.com/CNC_Control_System--11942988_11942998.html]]></link><description><![CDATA[system to reach a stable output. A good CNC control system has high speed.
How Does a CNC Control System Work?
Control Systems can be classified as open loop control systems and closed loop control s]]></description><pubDate><![CDATA[20240527]]></pubDate></item>
<item>
<title><![CDATA[IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment]]></title><link><![CDATA[https://pegoelectronics.en.ec21.com/IEC60529_IPX5_and_IPX6_Jet--11940576_11941014.html]]></link><description><![CDATA[open-type equipment, which has no size and weight limit to the device under test. The equipment is consisted by control box, turntable, jet nozzles (diameter 6.3mm and 12.5mm) and nozzle holder. A 55]]></description><pubDate><![CDATA[20240522]]></pubDate></item>
<item>
<title><![CDATA[Automatic Riveting Machine]]></title><link><![CDATA[https://fuxinrobot.en.ec21.com/Automatic_Riveting_Machine--11940035_11940050.html]]></link><description><![CDATA[System: Open-design control system with intuitive interface for easy parameter input and customization.
5) Quality Inspection: Optional CCD camera-based quality inspection module for real-time qualit]]></description><pubDate><![CDATA[20240520]]></pubDate></item>
<item>
<title><![CDATA[CK210 Small CNC Lathe]]></title><link><![CDATA[https://yornewmachine.en.ec21.com/CK210_Small_CNC_Lathe--11380514_11380519.html]]></link><description><![CDATA[Product No ： CK210 
Product Name ：Small CNC Lathe 
Features
(1).Automatic 4 positions tool post.
(2).With sink and nozzles.
(3).KY 980 Turning CNC System,Optional GSK 980Tb or Mach3
(4). ARM 9 CP]]></description><pubDate><![CDATA[20240518]]></pubDate></item>
<item>
<title><![CDATA[Hydraulic Molding Machine]]></title><link><![CDATA[https://roielfc.en.ec21.com/Hydraulic_Molding_Machine--11838013_11933202.html]]></link><description><![CDATA[This product is hydraulic molding machine
special for lost foam. It adopts computer control, whose automatic degree is relatively high. 2. Machine’s opening and closing mould speed is quick. It is ]]></description><pubDate><![CDATA[20240507]]></pubDate></item>
<item>
<title><![CDATA[Hobby CNC Metal Machines  Micro CNC Lathe Machine]]></title><link><![CDATA[https://yornew.en.ec21.com/Hobby_CNC_Metal_Machines_Micro--10330179_10330192.html]]></link><description><![CDATA[Product No: CK210
Product Name: Small CNC Lathe
Features(1).Automatic 4 positions tool post.(2).With sink and nozzles.(3).KY 980Tc Turning CNC System,Optional siemens 808D(4). ARM 9 CPU+FPGA,Ethernet]]></description><pubDate><![CDATA[20240507]]></pubDate></item>
<item>
<title><![CDATA[Velxun | Heated Platen Press | Hydraulic Press with Heating Platen]]></title><link><![CDATA[https://wb900508.en.ec21.com/Velxun_Heated_Platen_Press_Hydraulic--11927602_11927609.html]]></link><description><![CDATA[openings to allow for the simultaneous processing of various workpieces.
The press boasts precision temperature control technology that supports different temperature settings across various zones, t]]></description><pubDate><![CDATA[20240421]]></pubDate></item>
<item>
<title><![CDATA[Flipper Zero Multi-tool Device for Geeks]]></title><link><![CDATA[https://telcel003.en.ec21.com/Flipper_Zero_Multi_tool_Device--11917392_11917590.html]]></link><description><![CDATA[
body. It loves hacking digital stuff, such as radio protocols, access 
control systems, hardware, and more. It&apos;s fully open-source and 
customizable, so you can extend it in whatever way you like. ]]></description><pubDate><![CDATA[20240328]]></pubDate></item>
<item>
<title><![CDATA[Mesh Belt Furnace]]></title><link><![CDATA[https://fastenersmachine.en.ec21.com/Mesh_Belt_Furnace--11880290_11914603.html]]></link><description><![CDATA[The Mesh Belt Furnace
is a specialized industrial furnace used for heat treatment processes. It features a continuous mesh belt conveyor system that allows for efficient and uniform heating, annealin]]></description><pubDate><![CDATA[20240322]]></pubDate></item>
<item>
<title><![CDATA[Declutchable Gear Box]]></title><link><![CDATA[https://juhang1.en.ec21.com/Declutchable_Gear_Box--11601080_11853725.html]]></link><description><![CDATA[open and close, etc.
2. Product Parameter (Specification)
Model：JHM40 - JHM410Output torque：150 Nm - 15000 NmStructure：Partial rotating clutch handwheel structureApplication：Ball Valve, Butte]]></description><pubDate><![CDATA[20231012]]></pubDate></item>
<item>
<title><![CDATA[Metal Flue Gas Treatment System]]></title><link><![CDATA[https://sdngroups.en.ec21.com/Metal_Flue_Gas_Treatment_System--11906760_11906761.html]]></link><description><![CDATA[Metal Flue Gas Treatment SystemSelection Manual of Single Ash Hopper Dust Collector JMC-5II-6 
1. Intermetallic Compound Porous Membrane Material Technology
The porous/membrane materials of intermeta]]></description><pubDate><![CDATA[20240227]]></pubDate></item>
<item>
<title><![CDATA[Facerom Laboratory Tube Furnace 1100C]]></title><link><![CDATA[https://facerom.en.ec21.com/Facerom_Laboratory_Tube_Furnace_1100C--11824133_11824144.html]]></link><description><![CDATA[Applications
The tube furnace design is available in both open and non-open options, with diverse combinations to meet the requirements of a wide range of laboratory experiments, with high purity qua]]></description><pubDate><![CDATA[20230724]]></pubDate></item>
<item>
<title><![CDATA[PU Timing Belt STD5M Open]]></title><link><![CDATA[https://papari.en.ec21.com/PU_Timing_Belt_STD5M_Open--11861099_11861132.html]]></link><description><![CDATA[PU Timing Belt STD5M Open
Description:
A PU Timing Belt STD5M Open is a type of timing belt used in industrial applications for precise power transmission and motion control. Each part of its name ca]]></description><pubDate><![CDATA[20231031]]></pubDate></item>
<item>
<title><![CDATA[Lamination Press]]></title><link><![CDATA[https://jinminpeng.en.ec21.com/Lamination_Press--11402096_11407605.html]]></link><description><![CDATA[Vacuum laminating presses are widely used in the production and manufacture of PCB, FPCB, CCL, etc. We can supply all kinds of laminating presses to you. We mainly produce &quot;WEIDI brand and opened-typ]]></description><pubDate><![CDATA[20210628]]></pubDate></item>
<item>
<title><![CDATA[12-15m/Min Steel Bar Welding Machine for Construction Bridge Engineering]]></title><link><![CDATA[https://steelbarwelding.en.ec21.com/12_15m_Min_Steel_Bar--11868784_11868785.html]]></link><description><![CDATA[SystemPLCHeight Error±2mmError In Lenght±5mm/m Applications:The Steel Bar Welding Machine produced by Shandong time machinery technology Co., LTD is an essential equipment for welding steel bars in]]></description><pubDate><![CDATA[20231121]]></pubDate></item>
<item>
<title><![CDATA[Full Automatic Osb Board Making Machine]]></title><link><![CDATA[https://sufotechs.en.ec21.com/Full_Automatic_Osb_Board_Making--11892737_11892738.html]]></link><description><![CDATA[opening presses require to produce parts as intended. The 180-700m³/day MDF/HDF production line uses raw material through chips preparation, fiber manufacturing, glue dosing system, forming and hot ]]></description><pubDate><![CDATA[20240124]]></pubDate></item>
<item>
<title><![CDATA[Wire Loop Boxes]]></title><link><![CDATA[https://hulkmetal.en.ec21.com/Wire_Loop_Boxes--11887914_11887924.html]]></link><description><![CDATA[Wire Loop Boxes
Description:
The wire loop box typically consists of a sturdy casing with openings or conduits through which electrical wires or other services can be routed. These boxes are strategi]]></description><pubDate><![CDATA[20240114]]></pubDate></item>
<item>
<title><![CDATA[CNC Machining Nylon]]></title><link><![CDATA[https://flourishlegend.en.ec21.com/CNC_Machining_Nylon--11858161_11858176.html]]></link><description><![CDATA[opening polymerization of lactam formed after dehydration of amino acid. Unlike PS, PE, PP, etc., PA does not gradually change with the increase of heating temperature. Soften, but soften in a narrow]]></description><pubDate><![CDATA[20231024]]></pubDate></item>
<item>
<title><![CDATA[Automatic AGM Enveloping Machine for Super Small Batteries]]></title><link><![CDATA[https://leadacidbattery.en.ec21.com/Automatic_AGM_Enveloping_Machine_for--11623944_11623951.html]]></link><description><![CDATA[system, and meet safety gate was opened, the 
machine automatic stop. 
 The equipment is equipped with centrifugal pump suction plate system with dust filter, It can be removed 
and cleaned; The m]]></description><pubDate><![CDATA[20220820]]></pubDate></item>
<item>
<title><![CDATA[Plate Rolling Machine for Tank]]></title><link><![CDATA[https://ezhonggroup.en.ec21.com/Plate_Rolling_Machine_for_Tank--11511703_11511733.html]]></link><description><![CDATA[system. The electronic control system controls the compensation device between the beam and the work roll. Online compensation for work roll deformation, so that the detained workpiece can achieve pe]]></description><pubDate><![CDATA[20220117]]></pubDate></item>
<item>
<title><![CDATA[Furnace Auxiliary Equipment]]></title><link><![CDATA[https://chnzb.en.ec21.com/Furnace_Auxiliary_Equipment--11858115_11858121.html]]></link><description><![CDATA[open flames. Consequently, cooling water systems, dust collection units, and other safety measures are indispensable in minimizing risks and optimizing production processes.
With advancements in tech]]></description><pubDate><![CDATA[20231024]]></pubDate></item>
<item>
<title><![CDATA[High Speed Angular Contact Bearing]]></title><link><![CDATA[https://vxolinearmotion.en.ec21.com/High_Speed_Angular_Contact_Bearing--11741589_11782606.html]]></link><description><![CDATA[Open Type
Outer Ring Type
Flat
Specifications, Environment
Standard / For high Speed
Load Direction
Radial
Outer Ring
With Outer Ring
Size Standards
Metric System
Rolling Element Material
Steel
Holde]]></description><pubDate><![CDATA[20230505]]></pubDate></item>
<item>
<title><![CDATA[API 16A Double Ram Bop/Blowout Preventer for Sale]]></title><link><![CDATA[https://jolinfu123.en.ec21.com/API_16A_Double_Ram_Bop--11830699_11841162.html]]></link><description><![CDATA[opening/closing piston, locking screw, ram assembly, sealing parts etc. Top, bottom and outlet connection dimensions conform to Specification for Drilling through Equipment API Spec 16A.
Made up of t]]></description><pubDate><![CDATA[20230904]]></pubDate></item>
<item>
<title><![CDATA[CNC Machining Parts]]></title><link><![CDATA[https://hhcprecision.en.ec21.com/CNC_Machining_Parts--11858667_11882713.html]]></link><description><![CDATA[systems to control machine tools and processes, allowing for highly accurate and efficient production of intricate parts and components. The various CNC machining processes under HHC have different a]]></description><pubDate><![CDATA[20240102]]></pubDate></item>
<item>
<title><![CDATA[China Miniature Circuit Breaker Automatic Assembly and Inspecting Line]]></title><link><![CDATA[https://hongxinagio.en.ec21.com/China_Miniature_Circuit_Breaker_Automatic--11910307_11910308.html]]></link><description><![CDATA[system, and then separating the upper and lower shells.
Bottom coating of the upper shell: The installation of three components is completed through ten processes, and after each assembly is complete]]></description><pubDate><![CDATA[20240310]]></pubDate></item>
<item>
<title><![CDATA[Power Tube Crimping Machine]]></title><link><![CDATA[https://hbpdyl.en.ec21.com/Power_Tube_Crimping_Machine--11765491_11765492.html]]></link><description><![CDATA[open and lock. And the cylinder locking system design is before and after through, easy to clamp a variety of special-shaped elbows. 2. The hydraulic system consists of a motor, oil pump, solenoid va]]></description><pubDate><![CDATA[20230406]]></pubDate></item>
<item>
<title><![CDATA[Billet /Bar Induction Partial Heating Machine]]></title><link><![CDATA[https://tyinduction.en.ec21.com/Billet_Bar_Induction_Partial_Heating--11686230_11822646.html]]></link><description><![CDATA[open flames or hot surfaces, making it a safe option for workplace.
Versatility: Induction billet heaters can heat a wide range of metal materials, including steel, aluminum, copper, and more.
More a]]></description><pubDate><![CDATA[20240314]]></pubDate></item>
<item>
<title><![CDATA[Hydraulics Press Machine 4000T with CE/Nr Standard]]></title><link><![CDATA[https://tttinaliu2023.en.ec21.com/Hydraulics_Press_Machine_4000T_with--11753707_11753727.html]]></link><description><![CDATA[Opening Cylinders; Die Change Trolley, Lower Moving Bolster; With Mould Core-pulling &amp; Ejecting Oil Circuit; Mould Heating &amp; Cooling System.Technical specifications:Technical SpecificationsModelCapac]]></description><pubDate><![CDATA[20230424]]></pubDate></item>
<item>
<title><![CDATA[Rock Bucket - Jiangsu River Heavy Industry Co., Ltd]]></title><link><![CDATA[https://jiangsuriverexcavato.en.ec21.com/Rock_Bucket_Jiangsu_River_Heavy--11796266_11895455.html]]></link><description><![CDATA[opening that makes it easier to load materials 
and a sloped bottom that makes it easy to dump and dig them quickly. It 
also has a reinforced cutting edge that makes it easier to dig. A valve 
syste]]></description><pubDate><![CDATA[20240130]]></pubDate></item>
<item>
<title><![CDATA[Scrap Metal Shredder Machine]]></title><link><![CDATA[https://qiansenmachine.en.ec21.com/Scrap_Metal_Shredder_Machine--11801335_11843878.html]]></link><description><![CDATA[opening or hopper where the metal scrap is fed into the shredder.
Shredding Chamber: Inside the machine, there is a chamber equipped with rotating blades or hammers. The metal objects are forcefully ]]></description><pubDate><![CDATA[20230912]]></pubDate></item>
<item>
<title><![CDATA[Customized Industrial 6 Axis Robot Arm Collaborative Cobot for Automatic with Simple Programming Ope]]></title><link><![CDATA[https://iimtrobot.en.ec21.com/Customized_Industrial_6_Axis_Robot--11892353_11892725.html]]></link><description><![CDATA[OPEN SOFTWARE AND HARDWARE ECOSYSTEM
IIMT Cobots are based on the Linux system platform with high compatibility. Users can remotely interact with robots through Ethernet protocol (TCP/IP)and Modbus f]]></description><pubDate><![CDATA[20240124]]></pubDate></item>
<item>
<title><![CDATA[220T High Speed Stamping Press Machine]]></title><link><![CDATA[https://aruda1.en.ec21.com/220T_High_Speed_Stamping_Press--11824681_11824682.html]]></link><description><![CDATA[Opening 1600 x 250 mm
Motor 60 HP
Lubrication forced lubrication
Vibration System dynamic balance &amp; shock-proof footpads
The machine is specialized in producing motor lamination, the stators and roto]]></description><pubDate><![CDATA[20230725]]></pubDate></item>
<item>
<title><![CDATA[Common Anodizing Machine]]></title><link><![CDATA[https://ruisite.en.ec21.com/Common_Anodizing_Machine--11829659_11829664.html]]></link><description><![CDATA[open program and fully automatic PLC touch screen operation.
1. Production line can be fully automatic and semi-automatic conversion, scientific and reasonable design, compact, high degree of automat]]></description><pubDate><![CDATA[20230804]]></pubDate></item>
<item>
<title><![CDATA[Vacuum Lamination Press]]></title><link><![CDATA[https://martinj.en.ec21.com/Vacuum_Lamination_Press--11785468_11785825.html]]></link><description><![CDATA[Vacuum lamination press is widely used for PCB, FPCB, CCL, etc. We mainly produce &quot;WEIDI brand and open-type and closed-type medium - large-size laminating presses of nominal pressures from 6000KN to]]></description><pubDate><![CDATA[20230521]]></pubDate></item>

</channel>
</rss>