<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - pressure tank]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/pressure_tank--2673/1/pressure tank.html]]></link><item>
<title><![CDATA[Fluoroplastic Lining Tank Ultra-pure Semiconductor Grade PTFE Pressure Vessel Tank]]></title><link><![CDATA[https://ronacen.en.ec21.com/Fluoroplastic_Lining_Tank_Ultra_pure--10919386_10920280.html]]></link><description><![CDATA[]]></description><pubDate><![CDATA[20240730]]></pubDate></item>
<item>
<title><![CDATA[Stainless Steel Wine/Cider Fermentation and Storage Tank]]></title><link><![CDATA[https://hgbeerequipmemt.en.ec21.com/Stainless_Steel_Wine_Cider_Fermentation--12028508_12034026.html]]></link><description><![CDATA[tank pressure test .7). Energy conservation and pollution emissions.300L Description of fermenter :Small mode fermentation tanks suitable for home brew and beer bar. The fermentation tanks use certif]]></description><pubDate><![CDATA[20260304]]></pubDate></item>
<item>
<title><![CDATA[Water Hammer Arrester]]></title><link><![CDATA[https://gtijames7.en.ec21.com/Water_Hammer_Arrester--12064232_12064233.html]]></link><description><![CDATA[pressure and velocity causes a surge or spike of water and is called water hammer. When this occurs, 
a pressure wave travels back through the piping until it finds a point of relief. 
The water hamm]]></description><pubDate><![CDATA[20251210]]></pubDate></item>
<item>
<title><![CDATA[Brush Plating Tin Equipment for Copper Busbar, Copper Terminal Block]]></title><link><![CDATA[https://creview.en.ec21.com/Brush_Plating_Tin_Equipment_for--12015860_12055143.html]]></link><description><![CDATA[pressure of the brush are important for achieving a uniform coating.
Rinsing: Immediately after plating, the workpiece must be thoroughly rinsed with water to remove any residual plating solution.
Dr]]></description><pubDate><![CDATA[20260415]]></pubDate></item>
<item>
<title><![CDATA[Passivation Roll Coater for Color Coating Line]]></title><link><![CDATA[https://asconone.en.ec21.com/Passivation_Roll_Coater_for_Color--11965028_11998324.html]]></link><description><![CDATA[pressure sensor used for roll pressure feedback and linear bearings for frame 
movement. This system is driven manually by hand wheel. There are four Load cell for passivation 
coating rolls.
Applica]]></description><pubDate><![CDATA[20250729]]></pubDate></item>
<item>
<title><![CDATA[Vertical Cuttings Dryer]]></title><link><![CDATA[https://ogem3.en.ec21.com/Vertical_Cuttings_Dryer--9844602_9845564.html]]></link><description><![CDATA[pressure limit.
5. Screw conveyor installed under the dryer to pick up the dry solids for continues operation.
6. Cleaning pump provided for avoiding solids accumulation in the cuttings dryer
Technic]]></description><pubDate><![CDATA[20250305]]></pubDate></item>
<item>
<title><![CDATA[3-20LPM Oxygen Generator]]></title><link><![CDATA[https://qjozonetech.en.ec21.com/3_20LPM_Oxygen_Generator--11938412_12036992.html]]></link><description><![CDATA[pressure to desorb the adsorbed material.
PSA generators provide a cost-efficient source of oxygen. They are safer,less expensive, and more convenient as an alternative to tanks of cryogenic oxygen o]]></description><pubDate><![CDATA[20250115]]></pubDate></item>
<item>
<title><![CDATA[Filament Winding Machine]]></title><link><![CDATA[https://vidatek.en.ec21.com/Filament_Winding_Machine--7790891_11232996.html]]></link><description><![CDATA[high pressure vessels/cylinders(Type 2-4,Type II- IV) 2. Rescue vessels3. CNG gas tank,CHG, hydrogen gas storage 4. Any other product required the reinforcement strength made by multi axis winding]]></description><pubDate><![CDATA[20241202]]></pubDate></item>
<item>
<title><![CDATA[Cryogenic Storage Tanks]]></title><link><![CDATA[https://alphacryogen.en.ec21.com/Cryogenic_Storage_Tanks--12024255_12024256.html]]></link><description><![CDATA[tanks are typically used for the storage and transportation of liquefied gases, such as liquid oxygen, liquid nitrogen, or liquid argon. Liquefied gases become liquid under high pressure or low tempe]]></description><pubDate><![CDATA[20241113]]></pubDate></item>
<item>
<title><![CDATA[PP Tank]]></title><link><![CDATA[https://bwtwm.en.ec21.com/PP_Tank--2928907_12019632.html]]></link><description><![CDATA[tank is equipped with a material interface, a cleaning port, a manhole, a breathing valve interface, and a liquid level gauge interface. The working pressure of the equipment is normal pressure, work]]></description><pubDate><![CDATA[20241022]]></pubDate></item>
<item>
<title><![CDATA[Ceiling Fan Rotor Casting Machine]]></title><link><![CDATA[https://osneq.en.ec21.com/Ceiling_Fan_Rotor_Casting_Machine--12017287_12017290.html]]></link><description><![CDATA[pressure can be adjusted individually as needed, and the adjusted pressure is clearly visible.
The hydraulic oil and mold are cooled by water cooling to ensure that the hydraulic oil and mold do not ]]></description><pubDate><![CDATA[20241014]]></pubDate></item>
<item>
<title><![CDATA[PSA Oxygen Generation]]></title><link><![CDATA[https://psaoxygenerator.en.ec21.com/PSA_Oxygen_Generation--12015940_12015941.html]]></link><description><![CDATA[pressure, and flow, at a fraction of the cost of traditional gas delivery. We provide oxygen generators that deliver a quick return on investment, ensuring stable and predictable annual costs. Even c]]></description><pubDate><![CDATA[20241010]]></pubDate></item>
<item>
<title><![CDATA[Cast Steel Floating Ball Valve]]></title><link><![CDATA[https://larphy.en.ec21.com/Cast_Steel_Floating_Ball_Valve--12001280_12002098.html]]></link><description><![CDATA[pressure of steel float ball valves is high, usually higher than national standards, which can effectively prevent water leakage. At the same time, high-temperature and high-pressure resistant sealin]]></description><pubDate><![CDATA[20240910]]></pubDate></item>
<item>
<title><![CDATA[Electrical Discharging Saw Machine]]></title><link><![CDATA[https://techedm.en.ec21.com/Electrical_Discharging_Saw_Machine--10439326_10717502.html]]></link><description><![CDATA[pressure. The belt type steel electrode is guided with two guiders in order to make sure the electrode is under good tension condition. And the belt type steel electrode tension can be adjusted by th]]></description><pubDate><![CDATA[20240909]]></pubDate></item>
<item>
<title><![CDATA[Drawer Oil Retaining Ring 4GA14276]]></title><link><![CDATA[https://yoyik456.en.ec21.com/Drawer_Oil_Retaining_Ring_4GA14276--11988505_11996635.html]]></link><description><![CDATA[pressure hose SMS-10/N1/4-1219mm-B
electric centrifugal pump head 65-250B
impeller pump DFB125-80-250-05
roots vacuum pump P-2332
non-return valve (DN8) PVP-8-1-1/0.06
vacuum oil tank float valve DN8]]></description><pubDate><![CDATA[20240902]]></pubDate></item>
<item>
<title><![CDATA[Veera D100C Used/Waste Oil To Diesel Distillation Plant]]></title><link><![CDATA[https://sakthiveera.en.ec21.com/Veera_D100C_Used_Waste_Oil--11990960_11991078.html]]></link><description><![CDATA[huge investment on acres of land)* High Temperature Pressure sensors and built-in safety values ensures Zero harm* High quality robust sustainable materials* Customizable energy source as per needs]]></description><pubDate><![CDATA[20240824]]></pubDate></item>
<item>
<title><![CDATA[Vertical Vacuum Degasser]]></title><link><![CDATA[https://01solidscontrol.en.ec21.com/Vertical_Vacuum_Degasser--10714851_10714957.html]]></link><description><![CDATA[pressure
-0.030～-0.045MPa
-0.030～-0.050MPa
-0.030～-0.055MPa
-0.040～-0.065MPa
Ratio
1.68
1.68
1.68
1.72
Efficiency
≥95%
≥95%
≥95%
≥95%
Main motor
15KW
22KW
30KW
37KW
Vacuum pump motor
]]></description><pubDate><![CDATA[20240806]]></pubDate></item>
<item>
<title><![CDATA[High Speed Servo Hydraulic Press]]></title><link><![CDATA[https://ntbtskjc.en.ec21.com/High_Speed_Servo_Hydraulic_Press--11967557_11967561.html]]></link><description><![CDATA[pressure is controlled by a servo motor-pressure sensor closed-loop, and the position is controlled by a servo motor-displacement sensor closed-loop to achieve digital control of all parameters.Mold ]]></description><pubDate><![CDATA[20240712]]></pubDate></item>
<item>
<title><![CDATA[Bhr700v]]></title><link><![CDATA[https://1347013828.en.ec21.com/Bhr700v--11962667_11962673.html]]></link><description><![CDATA[pressure
MPa
≥0.6
Air flow (ANR:normal)
L
550
Volume
Coolant tank
L
750
Include coolant though spindle
Hydraulic station
L
30
Water chiller
L
70
Dimensions
L*W*H
mm
8315×4436×3835
Net/Gross weigh]]></description><pubDate><![CDATA[20240704]]></pubDate></item>
<item>
<title><![CDATA[ETO Exhaust Gas Treatment Equipment]]></title><link><![CDATA[https://rongfengjoanna888.en.ec21.com/ETO_Exhaust_Gas_Treatment_Equipment--11954858_11954859.html]]></link><description><![CDATA[tank, chiller, high-pressure fan, control system and sensors (temperature, pressure, ethylene glycol density, pH meter, liquid level sensor and EO detector), etc.
Product characteristics1. The remova]]></description><pubDate><![CDATA[20240621]]></pubDate></item>
<item>
<title><![CDATA[Stainless Steel Mixing Tank Liquid Tank Agitated Tank Reactor Strring SS304 SS316L]]></title><link><![CDATA[https://z86832861.en.ec21.com/Stainless_Steel_Mixing_Tank_Liquid--11954844_11955209.html]]></link><description><![CDATA[Mixing tank(pressure vessel is also available)Application:Mixing milk, juice, or any other viscous liquidUsed as liquid storage, liquid mixing, temporary storage, etc. It is also ok to mix liquid and]]></description><pubDate><![CDATA[20240621]]></pubDate></item>
<item>
<title><![CDATA[Stainless Steel Mixing Tank]]></title><link><![CDATA[https://ymeequipment.en.ec21.com/Stainless_Steel_Mixing_Tank--11953736_11953738.html]]></link><description><![CDATA[tank. The dished heads are stamped from high-purity stainless steel plates of a Japanese brand, HOKKAI, or conical heads can be chosen to meet budget-friendly options.
Constant Pressure: The test pre]]></description><pubDate><![CDATA[20240619]]></pubDate></item>
<item>
<title><![CDATA[Multifunctional Furnace for Vacuum Hot Pressing Sintering]]></title><link><![CDATA[https://haoyuefurnace.en.ec21.com/Multifunctional_Furnace_for_Vacuum_Hot--11953323_11953353.html]]></link><description><![CDATA[tank design, all of which is made of stainless steel and corrosion resistant.
2.The design of the circular vacuum furnace ensures good air tightness of the chamber and has high pressure resistance.
3]]></description><pubDate><![CDATA[20240618]]></pubDate></item>
<item>
<title><![CDATA[RJN-200 Paintball Vitamin E Fish Oil DHA Facial Serum Capsules Softgel Encapsulation Machine]]></title><link><![CDATA[https://maggie1234567.en.ec21.com/RJN_200_Paintball_Vitamin_E--11928429_11928452.html]]></link><description><![CDATA[tank, electric control cabinet, conveyor, shape/drying rotary cage, colloid mill etc. Advantages: 1. water cooling of this machine ensure clean environment.2. Adopting air pressure ensure gelatin sto]]></description><pubDate><![CDATA[20240606]]></pubDate></item>
<item>
<title><![CDATA[Hepa Filter PU Dosing Gluing Machine]]></title><link><![CDATA[https://xd5358840.en.ec21.com/Hepa_Filter_PU_Dosing_Gluing--6307152_10814791.html]]></link><description><![CDATA[tank/metering pump/glue pipe heating function (optional);13. Vacuum control keeps thin fluids from dripping;14. Unique control system which will not influenced by air pressure factor, ensures optimal]]></description><pubDate><![CDATA[20240530]]></pubDate></item>
<item>
<title><![CDATA[Acid Production System]]></title><link><![CDATA[https://remetalrecycling.en.ec21.com/Acid_Production_System--11943115_11943119.html]]></link><description><![CDATA[tank, and the concentration is maintained by the 98% sulfuric acid flowing from the absorption tower circulation system, which is sent to the acid cooler of the drying tower by the circulating acid p]]></description><pubDate><![CDATA[20240527]]></pubDate></item>
<item>
<title><![CDATA[Mud Gun]]></title><link><![CDATA[https://oilsolidscontrol.en.ec21.com/Mud_Gun--11942129_11942133.html]]></link><description><![CDATA[Mud Gun
is mainly used to spray drilling fluid into mud tank under high pressure to avoid solid phase deposition at the corners of mud tank, usually divided into high and low pressure mud gun, the hi]]></description><pubDate><![CDATA[20240524]]></pubDate></item>
<item>
<title><![CDATA[IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment]]></title><link><![CDATA[https://pegoelectronics.en.ec21.com/IEC60529_IPX5_and_IPX6_Jet--11940576_11941014.html]]></link><description><![CDATA[pressure (Mpa)
As per the standard requirement
Flowmeter control
Manual control
Distance from specimen
2.5~3m (manual control)
Nozzle fixed way
Hand-held
Diameter of turntable
Φ600mm
Power of turnta]]></description><pubDate><![CDATA[20240522]]></pubDate></item>
<item>
<title><![CDATA[Hot Sale Hydraulic Oil Filter Support Customized Specifications]]></title><link><![CDATA[https://mango6.en.ec21.com/Hot_Sale_Hydraulic_Oil_Filter--11936366_11936400.html]]></link><description><![CDATA[pressures and flow rates.
· Wide range of micron rating∶ from 1μm to 500μm.
· Improved system reliability and lower maintenance costs.
· Customized hydraulic oil filters for specific filtratio]]></description><pubDate><![CDATA[20240514]]></pubDate></item>
<item>
<title><![CDATA[Hot Runner Heating Oil Mold Temperature Controller for Injection Mold]]></title><link><![CDATA[https://xinbangltd.en.ec21.com/Hot_Runner_Heating_Oil_Mold--11910358_11913397.html]]></link><description><![CDATA[tank and cooled by indirect cooling. It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. It can reach a maximum of 300℃.]]></description><pubDate><![CDATA[20240409]]></pubDate></item>
<item>
<title><![CDATA[50l Mini Home 500l Beer Brewing Equipment 800l Micro Brewery]]></title><link><![CDATA[https://woodenpubno.en.ec21.com/50l_Mini_Home_500l_Beer--11827094_11827103.html]]></link><description><![CDATA[Pressure vessel, PLC, Bearing, Pipelines
Key Selling Points:
Easy to Operate
Marketing Type:
New Product 2020
Video outgoing-inspection:
Provided
Product Name:
Brewhouse System
Thickness of Tanks:
In]]></description><pubDate><![CDATA[20230731]]></pubDate></item>
<item>
<title><![CDATA[4 Rolls Plate Bending Machine]]></title><link><![CDATA[https://ezhonggroup.en.ec21.com/4_Rolls_Plate_Bending_Machine--11602248_11602254.html]]></link><description><![CDATA[pressure caused by the deviation of the shaft during the rotation of the roller.
Since each roller can move freely and flexibly, the risk of scratches and cracks on the roller is avoided.
2
The adjus]]></description><pubDate><![CDATA[20220713]]></pubDate></item>
<item>
<title><![CDATA[Large Gas Phase Liquid Nitrogen Tank_stainless Steel Cryogenic Storage Container]]></title><link><![CDATA[https://tianchicryogenic.en.ec21.com/Large_Gas_Phase_Liquid_Nitrogen--11769355_11769356.html]]></link><description><![CDATA[self-pressurized liquid nitrogen containers, and stem cell liquid nitrogen tanks. For more detailed information about liquid nitrogen biological containers, please feel free to contact us!
]]></description><pubDate><![CDATA[20230414]]></pubDate></item>
<item>
<title><![CDATA[SMC Oil Tank Mould]]></title><link><![CDATA[https://fql254.en.ec21.com/SMC_Oil_Tank_Mould--11597141_11721833.html]]></link><description><![CDATA[pressure is applied. Cycle time ranges from one to five minutes, depending on part size and thickness. Features such as ribs, bosses and inserts can be molded in.
Compression molded fiberglass parts ]]></description><pubDate><![CDATA[20230206]]></pubDate></item>
<item>
<title><![CDATA[DRG Series Electric Heating Hot Water Tank]]></title><link><![CDATA[https://deyuan1601.en.ec21.com/DRG_Series_Electric_Heating_Hot--11835958_11836650.html]]></link><description><![CDATA[1. 高品质 .
2. 竞争价格 .
3. 最新科技
4. 充足供应和及时交货 .DRG系列电加热热水箱
申请: 热水箱适用于船上或平台上加热水,供船员使用的加热淡水。
]]></description><pubDate><![CDATA[20230822]]></pubDate></item>
<item>
<title><![CDATA[12 Position SPE Vacuum Manifolds]]></title><link><![CDATA[https://smtlabtech.en.ec21.com/12_Position_SPE_Vacuum_Manifolds--11707544_11707547.html]]></link><description><![CDATA[tank is formed by a quartz glass mold with uniform wall thickness and can withstand high negative pressure above -80kPa.
4. The extraction column tray and collection rack are made of special polymer ]]></description><pubDate><![CDATA[20230112]]></pubDate></item>
<item>
<title><![CDATA[Dry Ice Making Machine Dry Ice Pellet Maker Machine]]></title><link><![CDATA[https://wmmachinery.en.ec21.com/Dry_Ice_Making_Machine_Dry--11537767_11754038.html]]></link><description><![CDATA[pressure (Mpa)
≤2.1
≤2.1
≤2.1
≤2.1
Dimension
(mm)
100*50*100cm
128*60*138cm
130*65*155cm
155*70*155cm
Weight
200kg
350kg
600kg
1300kg
Fuel tank
capacity (L)
100
180
280
280
Fluid
enter inner ]]></description><pubDate><![CDATA[20230322]]></pubDate></item>
<item>
<title><![CDATA[Hydraulics Press Machine 4000T with CE/Nr Standard]]></title><link><![CDATA[https://tttinaliu2023.en.ec21.com/Hydraulics_Press_Machine_4000T_with--11753707_11753727.html]]></link><description><![CDATA[pressure setting and stroke(travel) setting are available. It is functioned by pressure maintaining and adjustable time delay.E. Working pressure and stroke can be easily adjusted within a certain ra]]></description><pubDate><![CDATA[20230424]]></pubDate></item>
<item>
<title><![CDATA[500L IBC Vertical Steel Tray]]></title><link><![CDATA[https://jsxinhuasheng.en.ec21.com/500L_IBC_Vertical_Steel_Tray--11847055_11847056.html]]></link><description><![CDATA[pressure, it will automatically exhaust and decompressCorner wrapping design of the inner container Anti-collision - the bottom of the container is equipped with wrapping corners to better protect th]]></description><pubDate><![CDATA[20230922]]></pubDate></item>
<item>
<title><![CDATA[Milk Processing Plant 1klph Small Milk Processing Plant Tank Dairy Processing Machines Storage Tank]]></title><link><![CDATA[https://3itechengineers.en.ec21.com/Milk_Processing_Plant_1klph_Small--11827324_11827371.html]]></link><description><![CDATA[PLC, Pressure vessel, Pump, pastuerizer, homogenizer, bulk milk chiller, storage tanks, milk transfer pump]]></description><pubDate><![CDATA[20230731]]></pubDate></item>
<item>
<title><![CDATA[Professional Manufacturer for High Temperature Nitrogen Protective Metal Wire Electricity Annealing]]></title><link><![CDATA[https://tinacsun.en.ec21.com/Professional_Manufacturer_for_High_Temperature--11886196_11886473.html]]></link><description><![CDATA[pressure-resistant part of the furnace bottom is made of high-alumina heavy bricks, light bricks, and thermal insulation bricks.
Heating element: 
all parts of the furnace body (side wall) use resist]]></description><pubDate><![CDATA[20240110]]></pubDate></item>
<item>
<title><![CDATA[Green Plain Gauge Glass]]></title><link><![CDATA[https://aohonggaugeglass.en.ec21.com/Green_Plain_Gauge_Glass--11850290_11850301.html]]></link><description><![CDATA[pressure changes, enhancing its suitability for demanding applications. Its unique green glaze enhances visibility and reading accuracy, improving overall operational efficiency.
Please note that the]]></description><pubDate><![CDATA[20231004]]></pubDate></item>
<item>
<title><![CDATA[Separator Element]]></title><link><![CDATA[https://paier.en.ec21.com/Separator_Element--11744725_11744737.html]]></link><description><![CDATA[pressure environment are also provided with bypass valves. When the filter elements are replaced in time, the bypass valves can automatically open, ensuring the normal operation of the filter system ]]></description><pubDate><![CDATA[20230310]]></pubDate></item>
<item>
<title><![CDATA[Air Booster Tank]]></title><link><![CDATA[https://suncenterbooster.en.ec21.com/Air_Booster_Tank--11710813_11807964.html]]></link><description><![CDATA[https://www.suncenterbooster.com/products/air-pressure-booster-with-40l-air-tanks.html
Air Booster Tank
An air booster tank is a device that is used to increase the pressure of compressed air. It con]]></description><pubDate><![CDATA[20230617]]></pubDate></item>
<item>
<title><![CDATA[Biofermenter,Crystallizing Tank]]></title><link><![CDATA[https://prettechengineering.en.ec21.com/Biofermenter_Crystallizing_Tank--10970233_10970252.html]]></link><description><![CDATA[Tank
is always fitted with huge heat exchanging area, including external cooling coil, internal cooling coil or heat exchanger, with pressure 1 bar. website:https://www.prettechengineering.com/
More ]]></description><pubDate><![CDATA[20240124]]></pubDate></item>
<item>
<title><![CDATA[Professional Pressure Sandblasting Booth 1500mm CBBK-2000 Sandblasting Machine Special Price, Premiu]]></title><link><![CDATA[https://starpaintindustries.en.ec21.com/Professional_Pressure_Sandblasting_Booth_1500mm--11592005_11672272.html]]></link><description><![CDATA[pressure system, the machine works much more effectively compared to other sandblasting cabins to allow faster cleaning of the surface. Since the granulate used is recycled in its 30 liter tank (90 k]]></description><pubDate><![CDATA[20230504]]></pubDate></item>
<item>
<title><![CDATA[Constant Pressure Pump]]></title><link><![CDATA[https://heavyequipmentmainta.en.ec21.com/Constant_Pressure_Pump--11586014_11631015.html]]></link><description><![CDATA[pressure pump
Designed primarily for use in mobile applications.
The pump operates under self-priming conditions, with tank pressurization, or with an optional built-in charge pump (impeller).
A comp]]></description><pubDate><![CDATA[20220901]]></pubDate></item>
<item>
<title><![CDATA[GRP Water Tank(Grp Panel Tank)]]></title><link><![CDATA[https://samsungmcp.en.ec21.com/GRP_Water_Tank_Grp_Panel--268557_2218757.html]]></link><description><![CDATA[Pressure
Water pressure enforcement 3.3 times standard Transfomation rate in filled up with water : Less than 1% form Water tank Height
Wind Force
Less than 60m/sec
Earthquake Force
Horizontal Intens]]></description><pubDate><![CDATA[20130531]]></pubDate></item>
<item>
<title><![CDATA[Oil Purifier KASS Oil Cleaner(KSS Series)]]></title><link><![CDATA[https://kassec21.en.ec21.com/Oil_Purifier_KASS_Oil_Cleaner--8441620_8370222.html]]></link><description><![CDATA[.BD type
Caliber(In, Out)
IN(PT 1/4&quot;), OUT(PT 3/8&quot;)
Cracking Pressure
5kgf/&amp;plusmn;0.3
Temperature
0&amp;deg;C~80&amp;deg;C
Weight
4kg
6kg
Oil Tank Flux
300 downward
1,000 downward
Element
F-110
F-180
]]></description><pubDate><![CDATA[20190911]]></pubDate></item>
<item>
<title><![CDATA[CNC Machining Nylon]]></title><link><![CDATA[https://ysrapid01.en.ec21.com/CNC_Machining_Nylon--11777230_11908750.html]]></link><description><![CDATA[pressure washers, screws, nuts, seals, shuttles, sleeves, sleeve connectorss, etc.
Advantages of Nylon Material and Nylon Machined Parts
1. High mechanical strength, good toughness, high tensile and ]]></description><pubDate><![CDATA[20240305]]></pubDate></item>

</channel>
</rss>