<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title><![CDATA[EC21 Product Catalogs - timing temperature controller]]></title>
<link><![CDATA[https://www.ec21.com/ec-market/timing_temperature_controller--2673/1/timing temperature controller.html]]></link><item>
<title><![CDATA[High Precision Film Fined Resistors]]></title><link><![CDATA[https://xy-resistor.en.ec21.com/High_Precision_Film_Fined_Resistors--12069996_12070002.html]]></link><description><![CDATA[Temperature CoefficientThese resistors have a stable and low temperature coefficient of resistance (TCR), typically ranging from ±2 ppm/°C to ±25 ppm/°C. This stability ensures that the resistanc]]></description><pubDate><![CDATA[20260413]]></pubDate></item>
<item>
<title><![CDATA[Stainless Steel Wine/Cider Fermentation and Storage Tank]]></title><link><![CDATA[https://hgbeerequipmemt.en.ec21.com/Stainless_Steel_Wine_Cider_Fermentation--12028508_12034026.html]]></link><description><![CDATA[temperature control? The PLC or digital dispalyer could control the temperature by connecting with the PT 100 sensor.The brewing tanks with rock wool to keep warm,the fermenters and bright beer tank ]]></description><pubDate><![CDATA[20260304]]></pubDate></item>
<item>
<title><![CDATA[Hem Making Machine Flour Making Plant]]></title><link><![CDATA[https://hembeerequipment.en.ec21.com/Hem_Making_Machine_Flour_Making--12028557_12028567.html]]></link><description><![CDATA[control the temperature of the sprouts,they have to be turned on a regular basis. Historically, this was done by hand, but in modern times it is done by mechanicalturners. The modern techniques used ]]></description><pubDate><![CDATA[20260401]]></pubDate></item>
<item>
<title><![CDATA[Rectifier Power Supply for Brush Plating, Constant Voltage Power Supply with Ampere Metering Functio]]></title><link><![CDATA[https://creview.en.ec21.com/Rectifier_Power_Supply_for_Brush--12015860_12015871.html]]></link><description><![CDATA[temperature, bath supply, anode size, and relative movement speed.
7. DC output terminal. Normally, the red binding post outputs high potential, and the black binding post outputs low potential.
8. T]]></description><pubDate><![CDATA[20260415]]></pubDate></item>
<item>
<title><![CDATA[Explosion Proof Digital Camera for Oil and Gas]]></title><link><![CDATA[https://xuxin1.en.ec21.com/Explosion_Proof_Digital_Camera_for--12053528_12053529.html]]></link><description><![CDATA[Temperature
-20℃～50℃
Relative humidity
≤95％(25℃)
Atmospheric pressure
80 kPa～106kPa
Storage temperature
-40℃～+60℃
Place of use
Can be used in Zone 1 and Zone 2, Class IIA, IIB, II]]></description><pubDate><![CDATA[20250401]]></pubDate></item>
<item>
<title><![CDATA[Multi-function Stone Waterproof Protective Stone Cleaning-protective-drying Equipment]]></title><link><![CDATA[https://better18099.en.ec21.com/Multi_function_Stone_Waterproof_Protective--11326863_11381942.html]]></link><description><![CDATA[temperature and energy-saving control system ensure uniform specifications and quality of the finished slab.
3.The cleaning system adopts high-pressure recycled water combined with a brush to make su]]></description><pubDate><![CDATA[20250401]]></pubDate></item>
<item>
<title><![CDATA[OEM Extrusion Aluminum CNC Machined Precision Heatsink Custom CNC Extruded Heat Sink for Cooling]]></title><link><![CDATA[https://bythermal.en.ec21.com/OEM_Extrusion_Aluminum_CNC_Machined--12049113_12049115.html]]></link><description><![CDATA[temperature control.
Cost - Effective
Compared to some other
materials used in heat sinks, aluminum is relatively cost - effective. This
makes our aluminum extruded heat sinks an affordable option fo]]></description><pubDate><![CDATA[20250314]]></pubDate></item>
<item>
<title><![CDATA[Extrusion Twin Screw Extruder for Plastic Granule]]></title><link><![CDATA[https://evergrace2024.en.ec21.com/Extrusion_Twin_Screw_Extruder_for--12031473_12031477.html]]></link><description><![CDATA[time, making them suitable for high-production environments.
3.Temperature Control: Advanced heating and cooling systems enable precise temperature management throughout the extrusion process, which ]]></description><pubDate><![CDATA[20250305]]></pubDate></item>
<item>
<title><![CDATA[Customizable High Temperature Industrial Oven for Veterinary Instruments Treating and Drying Chambe]]></title><link><![CDATA[https://ycmachinery188.en.ec21.com/Customizable_High_Temperature_Industrial_Oven--11977214_11992197.html]]></link><description><![CDATA[temperature resistance, which maintains excellent stability even under continuous long working hours. At the same time, we have introduced an intelligent control system, which allows users to control]]></description><pubDate><![CDATA[20250303]]></pubDate></item>
<item>
<title><![CDATA[RTQT18 Automatic Block Production Line]]></title><link><![CDATA[https://reitmachine.en.ec21.com/RTQT18_Automatic_Block_Production_Line--11840484_11840494.html]]></link><description><![CDATA[temperature control, prolong the service life.
3.Palletizing system 
According to the program this device transfer the pallets with wet products and stack them automatically, two pallets once.
A fram]]></description><pubDate><![CDATA[20250301]]></pubDate></item>
<item>
<title><![CDATA[Pizza Cone Conveyor]]></title><link><![CDATA[https://huspa.en.ec21.com/Pizza_Cone_Conveyor--10919481_10919565.html]]></link><description><![CDATA[steel. The outer body made up of metal with electrostaic powder coated. The two side tampered glass for cooking view available. The device is digital to control and display time and temperature.]]></description><pubDate><![CDATA[20250213]]></pubDate></item>
<item>
<title><![CDATA[Plasma Torch Anode]]></title><link><![CDATA[https://reframetals.en.ec21.com/Plasma_Torch_Anode--12016380_12041520.html]]></link><description><![CDATA[temperature control, allowing adjustments to the plasma temperature according to different coating materials and requirements. For instance, when spraying high-melting-point ceramic materials, a high]]></description><pubDate><![CDATA[20250206]]></pubDate></item>
<item>
<title><![CDATA[X-1dry Ice Machine]]></title><link><![CDATA[https://djpowerfx.en.ec21.com/X_1dry_Ice_Machine--11941313_12038403.html]]></link><description><![CDATA[time when 50% output;
All stainless-steel metal parts, firm, durable and extremely low failure rate;
Easy to pour out the remaining water after use;
Increase safety with low-water and temperature sen]]></description><pubDate><![CDATA[20250121]]></pubDate></item>
<item>
<title><![CDATA[1kg-50kg Ozone Generator]]></title><link><![CDATA[https://qjozonetech.en.ec21.com/1kg_50kg_Ozone_Generator--11938412_12036984.html]]></link><description><![CDATA[control for option.
Specifications: 
Model
Ozone output (KG/HR)
Fed oxygen flow rate (m3/hr)
Ozone concentration (wt.%)
Cooling water (m3/hr)
Power consumption (kwh/kg o3)
Air inlet temperature
(℃)]]></description><pubDate><![CDATA[20250115]]></pubDate></item>
<item>
<title><![CDATA[CCGW040102/SCGW09T304/DCGW070202/VBGW110303 Inserts Good Cbn Cutting Tools High Qualify Cbn Inserts]]></title><link><![CDATA[https://aassddffgghhjjkkll.en.ec21.com/CCGW040102_SCGW09T304_DCGW070202_VBGW110303_Inserts--12035213_12035483.html]]></link><description><![CDATA[temperature stability and high-temperature hardness, and can work under high temperature, speed, and load, greatly improving cutting efficiency.
3. Excellent wear resistance: CBN tools have higher we]]></description><pubDate><![CDATA[20250108]]></pubDate></item>
<item>
<title><![CDATA[SDVC41-M Variable Frequency Intelligent Controller for Piezo Vibratory Feeder]]></title><link><![CDATA[https://cuhvibratoryfeeder.en.ec21.com/SDVC41_M_Variable_Frequency_Intelligent--12004202_12032907.html]]></link><description><![CDATA[Control: Output Voltage/Feed Speed of the controllercan be adjusted remotely by an external potentiometer, a PLC, a 1-5V or 4-A DC signal
Digital Overheat Protection: If internal temperature of the c]]></description><pubDate><![CDATA[20241224]]></pubDate></item>
<item>
<title><![CDATA[Reform the Manual Production Line To Automatic]]></title><link><![CDATA[https://duolin.en.ec21.com/Reform_the_Manual_Production_Line--12026187_12026188.html]]></link><description><![CDATA[control‌.
3:‌ Improve working environment‌: Automated production can effectively prevent employees from being exposed to high temperature, high humidity, dust, noise and other adverse productio]]></description><pubDate><![CDATA[20241121]]></pubDate></item>
<item>
<title><![CDATA[Battery Automatic Assembly Line]]></title><link><![CDATA[https://sidasi999.en.ec21.com/Battery_Automatic_Assembly_Line--9456505_9456517.html]]></link><description><![CDATA[temperature and pressure are settable)—mechanical arm pick the cells to cold press station for cold press, and apply short circuit test at the same time (water cooling system for cold press station]]></description><pubDate><![CDATA[20241105]]></pubDate></item>
<item>
<title><![CDATA[Metal Powder Bonding Mixer/ Heating and Cooling Mixer for Metal Powder]]></title><link><![CDATA[https://haiyangdeli.en.ec21.com/Metal_Powder_Bonding_Mixer_Heating--11926936_11930235.html]]></link><description><![CDATA[temperature, according to the change of material temperature and motor torsion, feeding the metallic powder and other mixturer at the best time.
2.WORKING PROCESS: 
a. Reasonable design the bonding a]]></description><pubDate><![CDATA[20241028]]></pubDate></item>
<item>
<title><![CDATA[High Configuration Version Double Coating Line: Advanced Coating Solutions]]></title><link><![CDATA[https://ltcoatingline.en.ec21.com/High_Configuration_Version_Double_Coating--11449504_12019803.html]]></link><description><![CDATA[Control System
Our double coating line is equipped with an advanced control system, which provides precise control over various parameters such as coating thickness, line speed, temperature, and dryi]]></description><pubDate><![CDATA[20241022]]></pubDate></item>
<item>
<title><![CDATA[Stamping Die Technologies]]></title><link><![CDATA[https://aomatemachinery.en.ec21.com/Stamping_Die_Technologies--12018094_12018096.html]]></link><description><![CDATA[temperature, pressure, and wear in real time. This data is crucial for predictive maintenance and quality control, helping to minimize downtime and ensure consistent part quality.
5. Hybrid Stamping ]]></description><pubDate><![CDATA[20241016]]></pubDate></item>
<item>
<title><![CDATA[Ceiling Fan Rotor Casting Machine]]></title><link><![CDATA[https://osneq.en.ec21.com/Ceiling_Fan_Rotor_Casting_Machine--12017287_12017290.html]]></link><description><![CDATA[times the efficiency of ordinary aluminum casting equipment.
Before processing → After processing
product name
Ceiling fan rotor casting machine
control method
PLC
model
OSN-1960
Energy Source
Hydr]]></description><pubDate><![CDATA[20241014]]></pubDate></item>
<item>
<title><![CDATA[Vacuum Graphitization Furnace]]></title><link><![CDATA[https://und24.en.ec21.com/Vacuum_Graphitization_Furnace--12009016_12009022.html]]></link><description><![CDATA[control and protection system
6. The unique induction coil adopts 5 times insulation treatment, which completely solves the application problems of induction coil or high temperature insulation, ensu]]></description><pubDate><![CDATA[20240924]]></pubDate></item>
<item>
<title><![CDATA[Cast Steel Floating Ball Valve]]></title><link><![CDATA[https://larphy.en.ec21.com/Cast_Steel_Floating_Ball_Valve--12001280_12002098.html]]></link><description><![CDATA[time, high-temperature and high-pressure resistant sealing materials (such as silicone) are used to ensure the safety and reliability of the sealing mechanism of the valve under high water pressure a]]></description><pubDate><![CDATA[20240910]]></pubDate></item>
<item>
<title><![CDATA[Electrical Discharging Saw Machine]]></title><link><![CDATA[https://techedm.en.ec21.com/Electrical_Discharging_Saw_Machine--10439326_10717502.html]]></link><description><![CDATA[I.The machine characteristics:
(1)The machine utilizing anodic machining principle, cutting special steel that can’t be easily cut, such as high-temperature heat-resistant alloys, high chromium, hi]]></description><pubDate><![CDATA[20240909]]></pubDate></item>
<item>
<title><![CDATA[Corn Dry Machine Maize Dry Machine]]></title><link><![CDATA[https://qingshannj.en.ec21.com/Corn_Dry_Machine_Maize_Dry--9855828_10107976.html]]></link><description><![CDATA[time,mildew and damp rate lower more than 90% than the high temperature drying.1, High automation (automatic monitor over hot air, grain and moisture, automatic failurealarm); Automatic circulating, ]]></description><pubDate><![CDATA[20240820]]></pubDate></item>
<item>
<title><![CDATA[Hot Selling TABLETOP Stainless Steel Double Layer Bucket/Heating Bucket/Wax Melting Machine]]></title><link><![CDATA[https://yide0769.en.ec21.com/Hot_Selling_TABLETOP_Stainless_Steel--11981691_11986997.html]]></link><description><![CDATA[controlled separetely 3.radian bottom design,drain the material out totally 4.Two temperature sensor,detect wax temp and jacket water temp separetely 5.jacket water level indicator,Real-time display ]]></description><pubDate><![CDATA[20240817]]></pubDate></item>
<item>
<title><![CDATA[10 Years Warranty 20% Power Saving Cold Room]]></title><link><![CDATA[https://cryo2019.en.ec21.com/10_Years_Warranty_20_Power--10885435_10885436.html]]></link><description><![CDATA[Feature: 
√ Best PU panels give you the best
insulation!
√ Suitable temperatures keep the
food in good condition for the long term!
√ Best surface materials guarantee
the lifetime more than 20 ]]></description><pubDate><![CDATA[20240815]]></pubDate></item>
<item>
<title><![CDATA[Heating Oven]]></title><link><![CDATA[https://hengjiujinye.en.ec21.com/Heating_Oven--11982428_11982656.html]]></link><description><![CDATA[temperature can be adjusted from room temperature to 300 ℃
Temperature control accuracy plus or minus 1 ℃
Temperature control method: PID dual digital intelligent temperature control, button sett]]></description><pubDate><![CDATA[20240809]]></pubDate></item>
<item>
<title><![CDATA[Atmospheric Plasma Cleaning System Chain Conveyor]]></title><link><![CDATA[https://atvplasma.en.ec21.com/Atmospheric_Plasma_Cleaning_System_Chain--11960396_11963494.html]]></link><description><![CDATA[temperature plasma cleaning
Plasma cleaning, as an important material surface modification method, has been widely used in many fields.
Compared with some traditional cleaning methods, such as ultras]]></description><pubDate><![CDATA[20240705]]></pubDate></item>
<item>
<title><![CDATA[Film Sample Stretch Test Device|Film Bidirectional Stretching Machine]]></title><link><![CDATA[https://potopyangliu.en.ec21.com/Film_Sample_Stretch_Test_Device--11956821_11958338.html]]></link><description><![CDATA[control systems.
Film biaxial stretching machine can perform tensile tests on a certain size of film samples at a suitable temperature and time according to the required tensile ratio. The data obtai]]></description><pubDate><![CDATA[20240627]]></pubDate></item>
<item>
<title><![CDATA[ETO Exhaust Gas Treatment Equipment]]></title><link><![CDATA[https://rongfengjoanna888.en.ec21.com/ETO_Exhaust_Gas_Treatment_Equipment--11954858_11954859.html]]></link><description><![CDATA[control system and sensors (temperature, pressure, ethylene glycol density, pH meter, liquid level sensor and EO detector), etc.
Product characteristics1. The removal rate after tail gas purification]]></description><pubDate><![CDATA[20240621]]></pubDate></item>
<item>
<title><![CDATA[Compact Design High Pressure Plastic Pallet Hot Plate Plastic Welding Machine]]></title><link><![CDATA[https://beishikang.en.ec21.com/Compact_Design_High_Pressure_Plastic--11953901_11954528.html]]></link><description><![CDATA[temperature control, with temperature self-check, closed loop control, multi-point independent temperature control, temperature control accuracy can reach ±2 degrees.Equipped with man-machine interf]]></description><pubDate><![CDATA[20240620]]></pubDate></item>
<item>
<title><![CDATA[Horizontal Side Loading S1 Spark Plasma Sintering System]]></title><link><![CDATA[https://haoyuefurnace.en.ec21.com/Horizontal_Side_Loading_S1_Spark--11953323_11953324.html]]></link><description><![CDATA[control the pressure output of the hydraulic cylinder, and the control accuracy can reach 1/1000.
Thermocouple and two-color infrared instrument are used to measure the temperature.
3.Advanced automa]]></description><pubDate><![CDATA[20240618]]></pubDate></item>
<item>
<title><![CDATA[QFP Package Lead Frame Precision High-speed Stamping Production Line]]></title><link><![CDATA[https://oreku.en.ec21.com/QFP_Package_Lead_Frame_Precision--11941325_11951019.html]]></link><description><![CDATA[time, it will cause internal wear of the flywheel and affect the performance of the machine tool. In the future, it is also necessary to add butter that can withstand high temperatures above 150 ℃ ]]></description><pubDate><![CDATA[20240613]]></pubDate></item>
<item>
<title><![CDATA[Bg Series Auto Pharmaceutical Equipment Medicine Pill Tablet Film Coating Machine]]></title><link><![CDATA[https://maggie1234567.en.ec21.com/Bg_Series_Auto_Pharmaceutical_Equipment--11929357_11929413.html]]></link><description><![CDATA[control of such process parameters as negative pressure, air flow and temperature etc, automatic run of various process flow in sequence. Main technical parameters: Technical\ TypeBG- 10D BG- 40 D BG]]></description><pubDate><![CDATA[20240606]]></pubDate></item>
<item>
<title><![CDATA[Hepa Filter PU Dosing Gluing Machine]]></title><link><![CDATA[https://xd5358840.en.ec21.com/Hepa_Filter_PU_Dosing_Gluing--6307152_10814791.html]]></link><description><![CDATA[220V 50Hz/60Hz
Power requirement
3.55KW
Air pressure requirement
4.5-8KG
Machine Dimension
1500(L)*1200(W)*1500(H)mm
Weight
approx 260 KG
Work environment
Humidity: 20%~98%RH; Temperature: 0~+40°c
]]></description><pubDate><![CDATA[20240530]]></pubDate></item>
<item>
<title><![CDATA[IEC60529 IPX5 and IPX6 Jet Hose Nozzles Waterproof Testing Equipment]]></title><link><![CDATA[https://pegoelectronics.en.ec21.com/IEC60529_IPX5_and_IPX6_Jet--11940576_11941014.html]]></link><description><![CDATA[control box. The test distance is controlled by manual. 
Jet hose nozzle with internal diameter of 6.3mm is for IPX5 jet-proof testing, the water flow rate is 12.5L/min, and test time is 1min/m2 and ]]></description><pubDate><![CDATA[20240522]]></pubDate></item>
<item>
<title><![CDATA[AccuThermo AW Series Rapid Thermal Processing]]></title><link><![CDATA[https://allwin21.en.ec21.com/AccuThermo_AW_Series_Rapid_Thermal--9759759_9763379.html]]></link><description><![CDATA[temperature control technologies to achieve the BEST rapid thermal processing performance (repeatability, uniformity, and stability) with decades of research directly applicable to ours.
You can use ]]></description><pubDate><![CDATA[20240514]]></pubDate></item>
<item>
<title><![CDATA[Herb Leaf Dryer,Tunnel Microwave Herb Drying Machine, Stevia Dryer,Thyme Dryer,Olive Leaf Dryer]]></title><link><![CDATA[https://sdyemai.en.ec21.com/Herb_Leaf_Dryer_Tunnel_Microwave--10746022_10747267.html]]></link><description><![CDATA[temperature sterilization, material store for a long time will not mildew.
6) Microwave leakage control in metal drying chamber and the waveguide, no radiation damage and harmful gas emissions, not p]]></description><pubDate><![CDATA[20240508]]></pubDate></item>
<item>
<title><![CDATA[Hydroxyethyl Methyl Cellulose HEMC]]></title><link><![CDATA[https://jfchemtech1.en.ec21.com/Hydroxyethyl_Methyl_Cellulose_HEMC--11882969_11929927.html]]></link><description><![CDATA[Temperature (°C)
70-90
Ash (WT%)
≤ 3.0
Residue On Ignition (WT%)
≤ 5.0
Moisture (﹪)
≤ 5.0
Viscosity (mpa.s, 2% solution, 20°C)
5-200000
Loss On Drying (WT%)
≤ 5.0
PH Value (1% solution, 2]]></description><pubDate><![CDATA[20240426]]></pubDate></item>
<item>
<title><![CDATA[High Temperature High Pressure Water Mold Temperature Controller]]></title><link><![CDATA[https://xinbangltd.en.ec21.com/High_Temperature_High_Pressure_Water--11910358_11913365.html]]></link><description><![CDATA[controller can display both the actual temperature and set temperature, easy to
operate with accuracy ±0.1 Celsius and long continuity and high efficiency. ▪
Digital timing for 24 hours a week to ]]></description><pubDate><![CDATA[20240409]]></pubDate></item>
<item>
<title><![CDATA[Trimble 5600 Total Station]]></title><link><![CDATA[https://endangsurvey.en.ec21.com/Trimble_5600_Total_Station--11329183_11842790.html]]></link><description><![CDATA[temperature:-20°C to +50°C (-5°F to +122°F)Data input/output:RS-232C Two-way communicationBatteries:–Central unit:–External:rechargeable NiMH battery 12V, 1.6 Ahrechargeable NiMH battery 12V,]]></description><pubDate><![CDATA[20240408]]></pubDate></item>
<item>
<title><![CDATA[Dry Type Floating Fish Feed Plant]]></title><link><![CDATA[https://hermmachinery.en.ec21.com/Dry_Type_Floating_Fish_Feed--11249522_11249580.html]]></link><description><![CDATA[time, it can improve the palatability of the feed and reduce the powder content. The best working temperature for this process is around 80°C. After the material passes through the external spraying]]></description><pubDate><![CDATA[20240402]]></pubDate></item>
<item>
<title><![CDATA[Cut To Length Machine]]></title><link><![CDATA[https://boyamachinery.en.ec21.com/Cut_To_Length_Machine--11540734_11599241.html]]></link><description><![CDATA[Temperature Impact
Based on the pursuit of coil cut to length machines efficiency, we need to increase the shear speed and reduce cutting time. However, while increasing the shear speed, the working ]]></description><pubDate><![CDATA[20220708]]></pubDate></item>
<item>
<title><![CDATA[Economical Wood Carving CNC Router 1212]]></title><link><![CDATA[https://hopetool1129.en.ec21.com/Economical_Wood_Carving_CNC_Router--11604297_11604463.html]]></link><description><![CDATA[Temperature:0-45℃
22
Packing size
1850*1750*1650mm
23
Net weight 
300kg
24
Gross weight
350kg
Remove columnRemove rowInsert columnInsert rowMerge RightMerge DownSplit HorizontalSplit VerticalBackgr]]></description><pubDate><![CDATA[20220718]]></pubDate></item>
<item>
<title><![CDATA[Metal Flue Gas Treatment System]]></title><link><![CDATA[https://sdngroups.en.ec21.com/Metal_Flue_Gas_Treatment_System--11906760_11906761.html]]></link><description><![CDATA[temperature protection;
③ Anti-condensation, anti-tar paste membrane;
④ High temperature back blowing online , online automatic ash discharge;
⑤ Automatic detection and control.
Advantages of R]]></description><pubDate><![CDATA[20240227]]></pubDate></item>
<item>
<title><![CDATA[High Low Temperature/ Low Air Pressure Test Chamber]]></title><link><![CDATA[https://lilyviyo12345.en.ec21.com/High_Low_Temperature_Low_Air--11853101_11853630.html]]></link><description><![CDATA[controller, color LCD touch screen
Communication interface
RS485, USB or LAN interface (Optional
according to customer’s requirements)
Vacuum pump
Leybold, Germany
Temperature sensor
Pt100
Power su]]></description><pubDate><![CDATA[20231013]]></pubDate></item>
<item>
<title><![CDATA[DDTG-55Z High Speed Tubular Linear Actuator]]></title><link><![CDATA[https://jointwayleader1.en.ec21.com/DDTG_55Z_High_Speed_Tubular--11883663_11883664.html]]></link><description><![CDATA[times , stop for 20minutes（15%-20%）;under min load can work continuously
Protection Class
IP67
Operating temperature
-20-60ºC
Wire length
Custom
Noise on load
≤60db
Dimension of DDTG-55Z High ]]></description><pubDate><![CDATA[20240104]]></pubDate></item>
<item>
<title><![CDATA[Semiconductor Molding Equipment Fou Display LED Plastic Package]]></title><link><![CDATA[https://llp6258280.en.ec21.com/Semiconductor_Molding_Equipment_Fou_Display--11840944_11840945.html]]></link><description><![CDATA[control parameters such as temperature and injection pressure to ensure the quality and stability of the plastic package.
Cutting: Cut the plastic package into individual LED lamp beads. This process]]></description><pubDate><![CDATA[20230903]]></pubDate></item>

</channel>
</rss>