EC21 Product Catalogs - ph 6

Iron Oxide Pigments Epoxy Resin ,Red 110 120 130,Yellow 313,Used for Color Cement, Color Cement

20240626

6 96 96 86 86 90 Moisture ≤% 1.0 1.0 1.0 1.0 1.0 1.0 Volatile(105°C)% ≤ 0.8 0.8 0.8 0.8 0.8 0.5 Water Soluble %(M/M) ≤ 0.3 0.3 0.5 0.3 0.3 0.5 pH value 5-7 5-7 5-7 4-6 4-6 5-8 Oil Absorption %

Iron Oxide Black

20231120

6. Instructions for use: Used in cement, iron black ratio is 2 ~ 4%. Adequate mixing. Test item The indicator Test results Fe3 O4 content% 90 95 Water% 1.0 0.8 Water-soluble matter, % 0.5 0.4 Sieve

Chrome Oxide Green

20070803

6 Specification Cr203 : 99%min Moisture: 0.3%max Water soluble matter: 0.3%max PH 6--8 Covering Power 95%min Oil absorption,g/100g: 15�5 Particle Size:325 mesh passing through 99.7% min. [Pac

Titanium Dioxide

20100625

Titanium DIoxide Anatase Type Tio2 98%Min Volatile Content 0.4%Max Water Soluble Matter 0.5%Max Oil Absorption 26%Max Suspension PH 6.5-8.0 Titanium DIoxide Rutile Type Tio2 93%Min Water Solub

Titanium Dioxide rutile & anatase

20110401

PH of aqueous suspension: 6.5-8.0 Oil absorption(g/100g): 26 max Residue on sieve(45 μm): 0.10% max Resistivitv in water extraction: 20 min Note: It is maily used in paint and coating. 5)Tita

VQ-D Series Thermoset Microspherical Fluorescent Pigments

20100127

pH: 3.8~ 6 (5% dispersion in water) ã *Moisture*: < 4% (2 gram under 140C for 0.5 hours) ã Specific Gravity: 1.3 (20C) ã Solvent Resistance: Not soluble in most solvent systems. (Solub

Chrome Oxide Green

20170908

Product Name Chrome oxide green Cr2O3 99.0%min Cr6+ ppm 10ppm max Oil absorption g/100g 25 max PH 5-8 Water soluble matter 0.4% max Residue on 325 mesh 0.3% max The color can be adjusted by the custo

Dispersant HIDIS

20130128

6 44-46 Viscosity (at 25°C) 100-300cps 200-500cps 100-300cps pH 7.0-9.0 7.5-8.0 6.0-8.0 Sp/Gr (25°C/4°C) 1.25-1.35 1.30-1.40 1.15-1.25 Solubility in water Readily soluble Readily soluble

Large Production Pigment Orange 13 Fast Orange G Used for Textile Pigment Paste and Plastic

20170808

PH Value ≤2.0 ≤1.5 30-40 ≤500 ≤5.0 6.0-7.0 Acid Resistance Alkali Resistance Alcohol Resistance Ester Resistance Benzene Resistance Ketone Resistance Soap Resistance Bleeding

Pigment Yellow 83

20140717

6H32Cl4N6O8 4) Molecular weight 386.36 5) CAS No. 5567-15-7 6) EU No. 226-939-8 2. Physical, Chemical and Fastness Properties 1) PH Value 6.0-7.0 2) Specific gravity 1.60±0.1 3) Oil absorption

CAISON Series Pigment Dyeing Color Paste for Garments

20181221

PH value to about 6. （2）Temperature rising and dyeing: Keep stirring during heating and dyeing, pay attention to the speed of temperature rising when the bath ratio is little. If unequally dyeing

Pigment Violet 23 Permanent Violet 23

20180817

PH Value 5.0-6.0 Fastness Properties Acid Resistance ------------ 5 Alkali Resistance ---------- 5 Alcohol Resistance -------- 5 Ester Resistance ----------- 5 Benzene Resistance ------- 5 Ket

Factory Pigment Yellow Iron Oxide

20171212

6 ISO 1248 Oil absorption ml/100g 25~35 ISO 787-5 Res. on 325 mesh % ≤0.3 ISO 787-7 Water soluble salts % ≤0.3 ISO 787-3 Moisture % ≤1.0 ISO 787-2 pH value 3.5~7 ISO 787-9 Ignition loss(1000

Micronized Barium Sulfate 2500mesh Paint, Coating Ink, Plastic Products

20190219

650mesh 800mesh 20BC 1250mesh 10AB 2500mesh 5AA 3500mesh 1AA 4500mesh~ 5000mesh SF10E 6000mesh Specific Gravity 4.35~4.40 4.35~4.40 4.35~4.40 4.35~4.40 4.35~4.4 4.35~4.4 4.4 4.4 4.4 Particle Si

Iron Oxide Yellow China's National Quality Products Hunan China

20190623

PH Value Tamped Apparent Density (g/cm³) Color Shade △E (Compared With Std.) Tinting Strength (%, Compared With Std.) 86% 25-35 25-35 ≤0.3 ≤0.3 4-7 0.4-0.6 ≤1.0 98-102 Paint, such as wooden

Pigment Red 57:1

20220722

6S 分子量：424.4407 相对密度：1.42-1.80 堆积密度/（lb/gal）：11.8-14.9 熔点/℃：360 平均粒径/μm： 0.04-0.3 颗粒形状：棒状比表面积/（m2/g）：21-105 pH/（10%浆