EC21 Product Catalogs - 2 point

Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine(FR245)

20250220

2. COA of product: Appearance .................................................white powder. Bromine %..........................................................67 min. Melt point °C.................

Polyethylene Wax/PE Wax/White PE Wax in Flake/Powder/Granular Polyethylene Wax/PE Wax/White PE Wax I

20241114

209000 Parameters: Polyethylene Wax PE Wax Model (ºC)Softening point mpa.sat 140ºC Viscosity mpa.sat 140ºC Viscosity Molecularweight Form (%)Whiteness g/cm3at 25ºC Density HA Hardness L101 110±5

Plasticizer DPHP Bis(2-propylheptyl) Phthalate Cas 53306-54-0 for Plastic Industry

20241021

2006) ltem Index Color(pt-co number) ≤ 30 Acid Value (mgKOH/g) ≤ 0.07 Density (20C)，g/cm³ 0.960-0.965 Water content, % ≤ 0.10 Flash point, ℃ ≥ 210℃ Ester content,%(GC) ≥ 99.

Eco-Friendly Plasticizer Dipropylene Glycol Dibenzoate (DPGDB, ECOD FLEX-342) for Adhesives, PVC

20240919

2. High solvating and lower fusing point which means faster processing speed. Very good foaming effect in PVC foaming process. 3. High plasticizing efficiency. More fillers can be added. In some form

Hydrolysis-resistant Stabilizer Antihydrolysate Bio-SW 100

20240827

25H34N2 CAS No : 2162-74-5 Molecular Weight : 362.57 Physical and Chemical properties and Technical Properties Appearance: white or light yellow crystalline Melting point: ≥ 50 ℃ Purity (GC) :

Blends of Acid Remover and EVA (Ethylene Vinyl Acetate Copolymer)

20240415

Application: Can be used for photovoltaic EVA packaging film Features: 1. Uniform mixing and stable performance; 2. High cleanliness, no black spots, gel, crystal points, impurities, etc; 3. Strong a

2,4,6 Tris (Dimethylaminomethyl) Phenol- Ancamine K54 Cas 90-72-2

20221208

2-7 (Cardinal method), the boiling point is about 250℃, 130-13Chemicalbook5℃ (0.133kPa), the relative density is 0.972-0.978 (20/4℃), and the refractive index is 1.514. Flash point 110℃. It h

1, 3, 5-Tris (2-hydroxyethyl) Cyanuric Acid Theic CAS No. 839-90-7 Stabilizer Plasticizer Water-Born

20220607

2-660-9Product Description1,3,5-Tris (2-hydroxyethyl) cyanuric acid CAS NO. 839-90-7 white crystalline powder or granule Hydroxyl value: 640±10(KOHmg/g) Melting point: 133.5 - 137ºC Acid value

PC(Polycarbonate) Flame Retardant

20230828

point ℃ 95~115 PH - 6.4~6.8 Vertical burning grade - UL94-V0(≥1.6mm) III . Product Features 1. The product is not deliquescent, not hydrolyzed, has excellent fireproof performance, and becomes c

Industry Grade Environmental Plasticizer DOP Liquid

20230809

Place of Origin: Zibo, China * English name: Dioctyl Phthalate * Quality index: GB11406-89 * Chemical formula: C24H38O4 * CAS Registry Number: 117-81-7 * EINECS Accession Number: 204-211-0 * Clas

PVC Impact Modifier Chlorinated Polyethylene CPE 135A

20230810

point of PVC. specification unit V alue Appearance --- White Powder Chlorine content % 35±2.0 Heat of fusion J/g ≤2.0 Remains (40 mesh) % ≤2.0 Volatile matter content % ≤0.5 Remains crysta

Di Tert Butyl Peroxide CAS:110-05-4

20230314

Di Tert Butyl Peroxide - DTBP Appearance: Pale yellow or colorless transparent liquid Molecular Formula: C8H18O2 Density:0.794 g/cm³ CAS :95-92-1 EINECS:203-733-6 Melting point: -30 ℃ Boiling

Dioctyl Terephthalate (DOTP)

20230829

Chemical Name: Di-2-ethylhexyl terephthalateCAS NO.:6422-86-2 Molecular Formula: C24H38O4 Molecular Weight: 390.50 g/mole Melting Point: -50 ℃Boiling Point: 380℃ Appearance: Transparent liquid Pr

Fischer Tropsch Synthetic Wax F110 for Hot Melt Adhesive

20230401

Product name: fischer tropsch synthetic wax F110 for hot melt adhesive Melting point: 110 ±2 ℃ Viscosity: 10 mpa.s at 140℃ Volatility: <2% Density: 0.92 g/cm³ at 25℃ Whiteness: 80±5 Appearan

UV Absorber UV 360 Cas No.103597-45-1

20230310

2-hydroxy-5-tert-octylphenyl) CAS No.:103597-45-1 Molecular formula:C41H50N6O2 Molecular weight:658.9 Appearance: Slightly Yellow powder Melting point,℃:195-198 Assay by HPLC, %: ≥99 Ash, %:

Light Stabilizer Ls 119 Cas No.106990-43-6

20230226

2H250N32 Molecular weight:2285.7 Appearance: White or Light Yellow Granule or Powder Purity, by HPLC:≥99.0% Volatile matter:≤0.5% Melting point:115~150℃ Ash content:≤0.1% Transmittance:

Antioxidant Dtbhq Cas No.88-58-4

20230310

Chemical name: 2,5-Di-Tert-Butylhydroquinone CAS No.：88-58-4 Molecular formula：C14H22O2 Molecular weight：222 Appearance: White powder Assay，%：≥98 Melting point，℃：212-218 Ash，%：

RX-971 Brominated SBS Replace HBCD Be Used in EPS and XPS As Flame Retardant

20221125

2.0g/cm3Volatile Matter≤0.3%5% TGA≥256oCSoftening Point≥120oCAppearanceWhite or off white powderPH6.5-8.5Molecular Weight≈100000 Product Performance Brominated SBS (RX-971) has good thermal

PVC Resin Cas No.

20230911

CAS No.:9002-86-2 EINECS number :208-750-2 Subformula :-[CH2CHCl]-n Melting point :302 Refraction rate :1.54 (20 C) Density: 1.4g /mL at 25 °C(lit.) Items SG3 SG5 SG7 SG8 K Value 72-71 68-66 62-60

Optical Brightener OB for Plastics

20220926

28H18N2O2 Molecular Weight 414 Technical Index Appearance:yellowish green powder Melting Point:357~359°C Purity:≥99% Uses Mainly be used in whitening of polyester and plastic, as well in white

Tetrabromobisphenol A Bis ( 2,3-dibromopropyl Ether ) Manufacturer

20180530

2 Formula: C21H20Br8O2 Molecular Weight: 943.62 Chracteristics: It is white powder, Soluble in dichloromethane, toluene, acetone and insoluble in water and methanol Items Index Melting Point 105-115&

Zinc Borate 2335

20180515

2 - 5 Fineness (Residue on 45μm sieve) (%) ≤ 0.1 Specific gravity (g/cm3) 2.67 Melting point (℃) 980 Temperature of dehydration (℃) > 320 Refractive index 1.58 Application: Zinc Borate 233

Acrylic Processing Aid 401

20181201

point, while PVC processing aid with high viscosity will increase the tensile strength and Vicat softening point. Acrylic processing aid can be widely used in clear and opaque PVC profile, PVC pipe,

PE Red Phosphorus Flame Retardant Masterbatch

20231129

2-1.4 1.3-1.6 Ignition point ℃ 300 min 300 min dosage UL94 V-0 3.2-1.6mm）% 10-15 6-12 Suggestions: 1. This product should be used in dark products (such as black). 2. In some FR system, you can a

Internal Lubricant LU-60

20200702

2h ≤0.20 Acid value （ mgKOH/g ） — 3.5±1.5 Melting point （℃） — 50-70℃ Density(g/cm3) — 0.8-0.9 Package 20kg/bag with PP bag and PE inner or Kraft paper bag. 550kg/bag Woven bag

UV Absorber UV 1 Cas No.57834-33-0

20230310

2 Molecular weight:282.3 Appearance: Slightly yellowish liquid Assay, %: ≥ 98.5 Boiling point, ℃/0.1mmHg：188-190 Water,%:≤1.0 UV ABSORBER HOSORB-UV1 is a high efficient anti-ultraviolet addi

Calcium Stearate

20170330

2.5 Free Fatty Acid (%-max) : 1.0 Melting Point ( C ) : 140-158 Chloride (%) : Almost Nil Fineness (% pass through 200 Mesh B.S.) : 99.9 % min PACKAGING : 10 Kg in PP bags with inner PE liner.

Tri Octyl Trimellitate (TOTM)

20181221

point:258 ℃/ 0.13 kPa Refractive index (20℃):1.483~1.485 Viscosity (20℃):252 MPas Product standard:HG/T 3874-2006 Trioctyl Trimellitate Colour:APHA 100 Max Specific Gravity:0.992 +/- 0.005

Optical Brightener / Optical Brightening Agent FP-127/ Fluorescent Whitening Agent

20160304

26O2 Molecular Weight 418 Technical Index Appearance:slight yellow powder Melting Point:219-221°C Purity:>=99% Maximum UV Spectrum Absorption:359nm Uses Mainly be used in whitening of plas

Fischer Tropsch Wax, FT Wax for Hot Melt Adhesives, PVC, Masterbatches

20230326

points ranging from about 45 - 106ºC. FT wax can be used in: 1. Hot melt adhesives. 2. PVC Lubricants. 3. PVC Stabilizers. 4. Masterbatches. 5. Asphalt modifiers. 6. Rubber Protective waxes. 7.

UV Absorber UV-326

20190719

25kg cardboard drum Appearance Light yellow powder Storage conditions Sealed, light-resistant containers Quality data Assay (HPLC) 99.0% min M elting point 137-141 Volatiles Content 0.5% max. Ash

Wood Rosin

20161224

20days after deposit Finish:Pallet packaging,stretch film Color:Light yellow Size:115x115x104(cm) Description: 1.Light color,low odor high softening point 2,Soluble in alcohol sovent 3,Good com

Dioctyl Phthalate DOP

20130311

20 Ester % ≥ 99.5 99.0 99.0 Acidity (as adipic acid )% ≤ 0.02 0.02 0.04 Density (ß 20)g/cm 3 0.913-0.919 Loss on dry (125 o C3hr)%≥ 0.2 0.3 0.5 Flash point(open) o C≥ 210 10 205 Pac