EC21 Product Catalogs - 5 points

Bis (2,3-dibromopropylether) of TBBA (BDDP)

20250220

point °C.........................................100 min. Volatile %................................................0.1 max. TGA 5% weight loss ...........................................305°C 10%

Polyethylene Wax/PE Wax/White PE Wax in Flake/Powder/Granular Polyethylene Wax/PE Wax/White PE Wax I

20241114

point mpa.sat 140ºC Viscosity mpa.sat 140ºC Viscosity Molecularweight Form (%)Whiteness g/cm3at 25ºC Density HA Hardness L101 110±5 20-100 <5 2000-3000 Powder/particle 85±5 0.94 2 L102 110±5 40

Factory Supply High Quality DOTP PVC Plasticizer DOTP Oil Dioctyl Terephthalate for PVC Products

20241021

50 Acid Value(mgKOH/g) ≤ 0.02 0.03 Density (20℃)，g/cm³ 0.981-0.985 0.981-0.985 Water content.% ≤ 0.03 0.05 Flash point,（open-cup）℃ ≥ 210 210 Purity % ≥ 99.5 99.0 Volume resisti

Eco-Friendly Plasticizer Diethylene Glycol Dibenzoate (DEGDB, ECOD FLEX-314) for Adhesives, PVC

20240919

Point(5mmHg, ℃ ): 240 Freezing Point(℃ ): 16 Flash Point(TCC, ℃ ): >150 Refractive Index(25℃ ): 1.5428 Specific Gravity(25℃ ): 1.17-1.18 Viscosity(Brookfield,25℃): 75 cps VOC Conten

Hydrolysis-resistant Stabilizer Antihydrolysate Bio-SW 100

20240827

5 Molecular Weight : 362.57 Physical and Chemical properties and Technical Properties Appearance: white or light yellow crystalline Melting point: ≥ 50 ℃ Purity (GC) : ≥ 98% Transmittance %: 42

Epoxy Fatty Acid Methyl Esters(EFAME)

20240530

,can use 20-30 per dosage . Remarks: Freezing point: 5-10℃. If freezed, EFAME will return to normal physical appearance when heated to above 25℃. Temperature changes do not affect the quality.

2,4,6 Tris (Dimethylaminomethyl) Phenol- Ancamine K54 Cas 90-72-2

20221208

point is about 250℃, 130-13Chemicalbook5℃ (0.133kPa), the relative density is 0.972-0.978 (20/4℃), and the refractive index is 1.514. Flash point 110℃. It has ammonia odor. Insoluble in cold

1, 3, 5-Tris (2-hydroxyethyl) Cyanuric Acid Theic CAS No. 839-90-7 Stabilizer Plasticizer Water-Born

20220607

5-Tris (2-hydroxyethyl) cyanuric acid CAS NO. 839-90-7 white crystalline powder or granule Hydroxyl value: 640±10(KOHmg/g) Melting point: 133.5 - 137ºC Acid value: ≤1.0(KOHmg/g) Moisture:

Industry Grade Environmental Plasticizer DOP Liquid

20230809

point: 190-195 * It can also be used in paint, dyes, dispersants, etc. , DOP plasticized PVC can be used to manufacture artificial leather, agricultural films, packaging materials, cables, etc. Our

PVC Impact Modifier Chlorinated Polyethylene CPE 135A

20230810

point of PVC. specification unit V alue Appearance --- White Powder Chlorine content % 35±2.0 Heat of fusion J/g ≤2.0 Remains (40 mesh) % ≤2.0 Volatile matter content % ≤0.5 Remains crysta

Di Tert Butyl Peroxide CAS:110-05-4

20230314

Di Tert Butyl Peroxide - DTBP Appearance: Pale yellow or colorless transparent liquid Molecular Formula: C8H18O2 Density:0.794 g/cm³ CAS :95-92-1 EINECS:203-733-6 Melting point: -30 ℃ Boiling

Dioctyl Terephthalate (DOTP)

20230829

Chemical Name: Di-2-ethylhexyl terephthalateCAS NO.:6422-86-2 Molecular Formula: C24H38O4 Molecular Weight: 390.50 g/mole Melting Point: -50 ℃Boiling Point: 380℃ Appearance: Transparent liquid Pr

High Quality Maleic Anhydride Wax with Low Price

20220319

SpecificationGrade: Maleic anhydride grafted PE wax M101 Melting point: 105±5 ℃ Grafting ratio: 5 % Volatility: < 5 %Form: white powderWhiteness: 80±5 %Density: 0.94 g/cm3Hardness: 2 dmm Applica

UV Absorber UV P Cas No.2440-22-4

20230310

Chemical name: 2-(2'-Hydroxy-5'-methylphenyl)benzotriazole CAS No.:2440-22-4 Molecular formula:C13H11N3O Molecular weight:225.3 Appearance: White to yellowish crystal powder Melting point,℃:128-13

Light Stabilizer Ls 119 Cas No.106990-43-6

20230226

5.7 Appearance: White or Light Yellow Granule or Powder Purity, by HPLC:≥99.0% Volatile matter:≤0.5% Melting point:115~150℃ Ash content:≤0.1% Transmittance: 425nm 93.0%min 450nm 95.0%min

Antioxidant 1035 Cas No.41484-35-9

20230310

5-9 Molecular formula:C38H54O6S Molecular weight:642.95 Appearance: White free flowing powder Assay,%:≥99 Melting point,℃:63-68 Ash,%,≤0.03 Volatility,%:≤0.1 Transmittance, %: 425nm ≥ 95

RX-974 Tris(Tribromoneopentyl) Phosphate FR-370 CAS 19186-97-1 TTBNP

20230104

Point178ºC-181ºCVolatile Matter≤0.3%Phosphorus Content2.90%-3.10%Relative Density2.325%TGA≥310ºCBoiling Point466.5ºC at 760 mmHgFlash Point235.9ºCProduct Performance It has excellent thermal

PVC Resin Cas No.

20230911

CAS No.:9002-86-2 EINECS number :208-750-2 Subformula :-[CH2CHCl]-n Melting point :302 Refraction rate :1.54 (20 C) Density: 1.4g /mL at 25 °C(lit.) Items SG3 SG5 SG7 SG8 K Value 72-71 68-66 62-60

Optical Brightener for POLYMER FP-127, CBS-127, Oba 378 Cas No.40470-68-6

20220926

point: 219-221 ℃ Purity: ≥ 99% Uses: Applicaticable to polymer, paint, printing ink and artificial fiber. It presents blue fluorescent light in all the polymers. PACKAGE: 25KG(55.1 pound) net

Zinc Borate 2335

20180515

5 Crystal water (%) 13.0 - 15.5 Particle size (μm) 2 - 5 Fineness (Residue on 45μm sieve) (%) ≤ 0.1 Specific gravity (g/cm3) 2.67 Melting point (℃) 980 Temperature of dehydration (℃) > 3

Acrylic Processing Aid 401

20181201

point, while PVC processing aid with high viscosity will increase the tensile strength and Vicat softening point. Acrylic processing aid can be widely used in clear and opaque PVC profile, PVC pipe,

Environment-Friendly XPS Flame Retardant Masterbatch

20231129

5 flammability % GB 8624-2012 DIN 4102-1 EN 13501-1 B1 ：5-6；B2：3-5 B1 ：5-6；B2：3-5 ：5-6；E ：3-5 Suggestions: 1. As the main flame retardant has a low melting point, it is recommended

Internal Lubricant LU-60

20200702

5±1.5 Melting point （℃） — 50-70℃ Density(g/cm3) — 0.8-0.9 Package 20kg/bag with PP bag and PE inner or Kraft paper bag. 550kg/bag Woven bag. For 20 container, we can load 11.2mt with p

Antioxidant 697 CAS NO.70331-94-1

20230310

point，℃：174-180 Ash，%：≤0.1 Volatility，%：≤0.5 Light transmittance: 425nm≥97% 500nm≥98% ANTIOXIDANT HONOX-697 is a sterically hindered phenolic antioxidant and metal deactivator.

Calcium Stearate

20170330

5 Free Fatty Acid (%-max) : 1.0 Melting Point ( C ) : 140-158 Chloride (%) : Almost Nil Fineness (% pass through 200 Mesh B.S.) : 99.9 % min PACKAGING : 10 Kg in PP bags with inner PE liner. OR

UV Absorber UV-9; BP-3; BENZOPHENONE-3; EVERSORB11; Oxybenzone

20160711

57-7 Structural Formula Main Indexes Appearance: Light yellow crystalline powder Content :≥99% Melting Point :62-64°C Ash: ≤0.1% Loss on Drying : ≤0.5% Solubility: Benzene : 56.2%;

Fischer Tropsch Wax, FT Wax for Hot Melt Adhesives, PVC, Masterbatches

20230326

points ranging from about 45 - 106ºC. FT wax can be used in: 1. Hot melt adhesives. 2. PVC Lubricants. 3. PVC Stabilizers. 4. Masterbatches. 5. Asphalt modifiers. 6. Rubber Protective waxes. 7.

UV Absorber UV-326

20190719

5kg cardboard drum Appearance Light yellow powder Storage conditions Sealed, light-resistant containers Quality data Assay (HPLC) 99.0% min M elting point 137-141 Volatiles Content 0.5% max. Ash

Tris(2,3-dichloropropyl)Phosphate (Tdcpp)

20170104

504, Conversion raten n20D1.498, Flash point(open)251°C, Freeze point-6°C, Decompose temperature 230°C, solubility 0.01%(30°C), P 7.2%, Cl 49.4%, soluble in ethanol and chloroform, in

Dioctyl Phthalate DOP

20130311

50 120 Ester % ≥ 99.5 99.0 99.0 Acidity (as adipic acid )% ≤ 0.02 0.02 0.04 Density (ß 20)g/cm 3 0.913-0.919 Loss on dry (125 o C3hr)%≥ 0.2 0.3 0.5 Flash point(open) o C≥ 210 10 205