EC21 Product Catalogs - hot melt adhesive

Fischer Tropsch Synthetic Wax F110 for Hot Melt Adhesive

20230401

Product name: fischer tropsch synthetic wax F110 for hot melt adhesive Melting point: 110 ±2 ℃ Viscosity: 10 mpa.s at 140℃ Volatility: <2% Density: 0.92 g/cm³ at 25℃ Whiteness: 80±5 Appearan

Fischer Tropsch Wax, FT Wax for Hot Melt Adhesives, PVC, Masterbatches

20230326

melting points ranging from about 45 - 106ºC. FT wax can be used in: 1. Hot melt adhesives. 2. PVC Lubricants. 3. PVC Stabilizers. 4. Masterbatches. 5. Asphalt modifiers. 6. Rubber Protective wax

Antioxidant 1098 Cas No. 23128-74-7

20230310

molded parts, fibers and films. It is also used for other polymers such as polyacetal, polyester, polystyrene, elastomer, polyurethane, ABS resin, adhesive, rubber and so on. info at hhochem. com

Yinox 430(300/TBM-6),Antioxidan

20230315

It is effective as an anti-skinning agent for hot melt adhesives, an anti-scorching agent for polyurethanes during condensation of TDI on polyesters, and a heat stabilizer for lubricants.

Antioxidant 565 Cas No.991-84-4

20230310

of hot melt adhesives (especially those derived from unsaturated elastomers), rosin ester tackifier resins, EPDM, ABS, impact polystyrene, polyamides and polyolefins. info at hhochem. com