EC21 Product Catalogs - melting

Fischer Tropsch Synthetic Wax F110 for Hot Melt Adhesive

20230401

Product name: fischer tropsch synthetic wax F110 for hot melt adhesive Melting point: 110 ±2 ℃ Viscosity: 10 mpa.s at 140℃ Volatility: <2% Density: 0.92 g/cm³ at 25℃ Whiteness: 80±5 Appearan

Fischer Tropsch Wax, FT Wax for Hot Melt Adhesives, PVC, Masterbatches

20230326

melting points ranging from about 45 - 106ºC. FT wax can be used in: 1. Hot melt adhesives. 2. PVC Lubricants. 3. PVC Stabilizers. 4. Masterbatches. 5. Asphalt modifiers. 6. Rubber Protective wax

High Quality Memory Nanomaterials

20250316

melting process, so as to the processed fibers can be bending in three dimensions. Features of product: *FCN01S is mainly suitable for PP materials with high viscosity; *The fiber added with FCN01S

Zinc Borate (ZB35)

20250220

Melting point °C .......................................980 Temp. of dehydration °C.................................320 Refractive index.........................................1.58 First Grade Whi

PVC Processing Aid

20241220

melting, improving melt rheological properties, and imparting lubrication properties. Main types and functions one Promoting resin melting: When PVC resin is heated and melted, processing aids first

High Molecular Weight Processing Aid

20241017

High molecular weight processing aid can effectively adjust the density and size of the foam, greatly improve the melt strength of PVC materials, effectively wrap the foaming gas, form a uniform hone

Acrylic Processing Aid

20241008

melt strength, enhances extensibility and improves melt homogeneity. Significantly increases the surface quality of PVC products,offering excellent wall-thickness control and good thermoforming capab

Hydrolysis-resistant Stabilizer Antihydrolysate Bio-SW 100

20240827

Melting point: ≥ 50 ℃ Purity (GC) : ≥ 98% Transmittance %: 425nm:≥95%; 500nm:≥98% Application Features This product is classified as a representative species of monomeric carbodiimide hydro

High Density Oxidized Polyethylene Wax

20240321

melting point and low viscosity, it promotes good resin fluidity, relatively reduces the power consumption of resin mixing, reduces the adhesion between resin and mold, is easy to remove film, plays

Acrylic Processing Aid

20231122

melt, change melting body flow, change the sex and change products surface quality . 4.The range of usage: ① profiles ② Pipes ③ Pipe fittings ④ Boards ⑤ Gusset plate ⑥ films. 5

Dioctyl Terephthalate (DOTP)

20230829

Chemical Name: Di-2-ethylhexyl terephthalateCAS NO.:6422-86-2 Molecular Formula: C24H38O4 Molecular Weight: 390.50 g/mole Melting Point: -50 ℃Boiling Point: 380℃ Appearance: Transparent liquid Pr

1, 3, 5-Tris (2-hydroxyethyl) Cyanuric Acid Theic CAS No. 839-90-7 Stabilizer Plasticizer Water-Born

20220607

Melting point: 133.5 - 137ºC Acid value: ≤1.0(KOHmg/g) Moisture: ≤0.3% PH: 6.5-7.3 Turbidity: ≤1.0PPM Packing: 25Kgs 500Kgs 800Kgs plastic woven bag lined with plastic bag. Application:

PC(Polycarbonate) Flame Retardant

20230828

Melting point ℃ 95~115 PH - 6.4~6.8 Vertical burning grade - UL94-V0(≥1.6mm) III . Product Features 1. The product is not deliquescent, not hydrolyzed, has excellent fireproof performance, and b

PVC Resin Cas No.

20230911

CAS No.:9002-86-2 EINECS number :208-750-2 Subformula :-[CH2CHCl]-n Melting point :302 Refraction rate :1.54 (20 C) Density: 1.4g /mL at 25 °C(lit.) Items SG3 SG5 SG7 SG8 K Value 72-71 68-66 62-60

Optical Brightener for POLYMER FP-127, CBS-127, Oba 378 Cas No.40470-68-6

20220926

optical brightener FP-127 OBA 378 Chemical name: 1,1'-biphenyl-4,4'-bis-benzoxazole Formula: C30H26O2 Appearance: yellowish or milk white crystal powder Melting point: 219-221 ℃ Purity: ≥ 99%

Tetrabromobisphenol A Bis ( 2,3-dibromopropyl Ether ) Manufacturer

20180530

Melting Point 105-115°C Bromine Content 67%min Volatile Matter 0.30% max Acetone Insoluble 0.060% max Carbonization Temperature 240°Cmin Whiteness 92min ♣ Usage: It is mainly used for p

Zinc Borate 2335

20180515

Melting point (℃) 980 Temperature of dehydration (℃) > 320 Refractive index 1.58 Application: Zinc Borate 2335 has small particle size so that it own average particle distribution and fine dispe

EPS/XPS Flame Retardant(FR-972)

20231129

Melting point 'C 110 min Decomposition temperature ℃ 280 min dosage % B1：5-6 B2：3-4 Suggestions： 1. As the main flame retardant has a low melting point, it is recommended that the product is

PVC Impact Modifier Chlorinated Polyethylene CPE 135A

20230810

melting point of PVC. specification unit V alue Appearance --- White Powder Chlorine content % 35±2.0 Heat of fusion J/g ≤2.0 Remains (40 mesh) % ≤2.0 Volatile matter content % ≤0.5 Remain

Ca-Zn Stabilizer CS-50

20210228

Melting temperature 90~150℃ Recommended Application Keep the original formula unchanged. The recommended dosage of CS-50 is 3~ 5 PHR. Adding Ca-Zn stabilizer CS-50 together with the PVC resin and o

Acrylic Processing Aid TF-100 for Foaming and PVC Powder.

20230901

the melt strength of PVC so as to prevent from bubble amalgamation for obtaining even foaming products. ● ensure perfect flow of PVC melt for obtaining smooth surface of PVC finished products.

Antioxidant 1098 Cas No. 23128-74-7

20230310

Melting point,℃: 156-162 Ash,%: ≤0.1 Volatility,%: ≤0.3 Clarity of solution: Clear Transmittance 425nm≥97% 500nm≥98% ANTIOXIDANT HONOX-1098 has characteristics of nondiscolouring, low vol

Antioxidant 168, Phosphite 168

20230315

Appearance White Powder Assay ≥ 99% Bulk Density 0.55-0.65g/ml Specific Gravity@20oC 1.03g/ml Melting Range 183-187oC Flash Point 225oC Synergistically combined with other antioxidants, comprise

Nano-based Compatible Toughener for PC Alloys or ABS Alloys

20230607

Melting index: 12.5g/10min. (190 ℃/2.16KG) l Basic resin: Composite ion polymer 9、 Processing suggestions: DRG-798 can be processed over a wide range, with typical processing temperatures ranging

Calcium Stearate

20170330

Melting Point ( C ) : 140-158 Chloride (%) : Almost Nil Fineness (% pass through 200 Mesh B.S.) : 99.9 % min PACKAGING : 10 Kg in PP bags with inner PE liner. ORIGIN OF COUNTRY : Thailand MANUFA

UV Absorber BENZOPHENONE-6

20190722

Clear solution, free from insoluble Transmittance: 300-400nm: 450-550nm: 500nm+: 1% max 90% min 95% min Melting Point: 134.0 min Loss on Drying: 0.5% max K value: 49 min Gardner Color: 4.0 Max

UV Absorber UV 531 Cas No.1843-05-6

20230310

Chemical name: 2-Hydroxy-4-n-octoxybenzophenone CAS No.:1843-05-6 Molecular formula:C21H26O3 Molecular weight:326 Appearance: Pale yellow crystalline powder Melting point,℃:47-49 Purity (HPLC), %:

Light Stabilizer Ls 791 Cas No.70624-18-9 / 52829-07-9

20230226

Chemical name: Light Stabilizer Blend 50% HALS944 + 50% HALS770 CAS No.:70624-18-9 52829-07-9 Apprearance: White or slightly yelloeish solid Melting Range, ℃: 〉50 Relative Density : 1.0-1.2g/l Va

Antioxidant 80 Cas No.90498-90-1

20230310

Melting point,℃:112.5 - 116 Ash, %:≤ 0.1 Transmittance: 425nm ≥ 96% 500nm ≥ 98% ANTIOXIDANT HONOX-80 is highly efficient radical scavenger, exceptional processing and long-term heat stabiliza

Ope Wax OA-103H

20240122

Appearance white powder/round beads Acid value (KOH/g) 23-29 Penetration (dmm) <3 Drop melting point (℃) 93-101 Density (g/cc) 0.92-0.93 Viscosity@150℃(cps) 20-30

Tribromoneopentyl Alcohol FR-513 TBNPA CAS 1522-92-5 CAS 1522-92-5

20230104

Melting Point≥64ºCWater Content≤0.3%Acid Value≤0.15mg KOH/g Product Performance: Tribromoneopentyl Alcohol (RX-973) contains approximately 73% aliphatic bromine. It has a high bromine content

Injection Application CACO3 Filler Masterbatch

20230815

Injection molding is a method of plastic formation including 2 phases: extruding melted plastic and pressing it into mould for fixed forms. Common applicationsGarden FurnitureOffice MaterialHousehold

Dpt Blowing Agent

20220823

Melting point（℃）200（decompose）Critical temperature（℃）205Gas evalution（20℃，101325Pa），mL/g270～290Particle size120 meshes passedAsh content / ％ ≤0.5Water content / ％

Aniline CAS 62-53-3

20221208

Aniline is the simplest aromatic amine, benzene molecule in a hydrogen atom for the amino group of compounds generated, colorless oil flammable liquid, strong smell. The melting point is -6.3℃, the

Silicone Masterbatch LYSI-401 Improve Processability and Productivity in HFFR Wire and Cable

20220628

Melt index ( 230℃, 2.16KG ) g/10min 12 ( typical value ) Dosage % (w/w) 0.5~5 Benefits (1) Improve processing properties including better flow ability , reduced extrusion die drool , less extruder

Di Tert Butyl Peroxide CAS:110-05-4

20230314

Di Tert Butyl Peroxide - DTBP Appearance: Pale yellow or colorless transparent liquid Molecular Formula: C8H18O2 Density:0.794 g/cm³ CAS :95-92-1 EINECS:203-733-6 Melting point: -30 ℃ Boiling

Acrylic Processing Aid 401

20181201

melt strength and uniformity, abate fracture and exudation of the fondant without bad influence of the mechanical properties of PVC. So the processing aid has been widely used in the PVC products. D

Optical Brightener / Optical Brightening Agent FP-127/ Fluorescent Whitening Agent

20160304

Melting Point:219-221°C Purity:>=99% Maximum UV Spectrum Absorption:359nm Uses Mainly be used in whitening of plastics such as PVC,PS,ABS,TPR,etc. Packaging & Shipping 10/20/25kg/drum Our Se