EC21 Product Catalogs - points

Good Price PE Wax Flakes Melting Point 110

20230401

PE wax properties: Polyethylene wax (PE wax), also known as polymer wax for short. It is widely used for its excellent cold resistance, heat resistance, chemical resistance and abrasion resistance.

Zinc Borate (ZB35)

20250220

point °C .......................................980 Temp. of dehydration °C.................................320 Refractive index.........................................1.58 First Grade Whiteness..

Polyethylene Wax/PE Wax/White PE Wax in Flake/Powder/Granular Polyethylene Wax/PE Wax/White PE Wax I

20241114

point mpa.sat 140ºC Viscosity mpa.sat 140ºC Viscosity Molecularweight Form (%)Whiteness g/cm3at 25ºC Density HA Hardness L101 110±5 20-100 <5 2000-3000 Powder/particle 85±5 0.94 2 L102 110±5 40

Factory Supply High Quality DOTP PVC Plasticizer DOTP Oil Dioctyl Terephthalate for PVC Products

20241021

(20℃)，g/cm³ 0.981-0.985 0.981-0.985 Water content.% ≤ 0.03 0.05 Flash point,（open-cup）℃ ≥ 210 210 Purity % ≥ 99.5 99.0 Volume resistivity/Ω, cm 2x1010 1x1010

Eco-Friendly Plasticizer Dipropylene Glycol Dibenzoate (DPGDB, ECOD FLEX-342) for Adhesives, PVC

20240919

point which means faster processing speed. Very good foaming effect in PVC foaming process. 3. High plasticizing efficiency. More fillers can be added. In some formulations there is an apparent decre

Hydrolysis-resistant Stabilizer Antihydrolysate Bio-SW 100

20240827

point: ≥ 50 ℃ Purity (GC) : ≥ 98% Transmittance %: 425nm:≥95%; 500nm:≥98% Application Features This product is classified as a representative species of monomeric carbodiimide hydrolysis-re

Epoxy Fatty Acid Methyl Esters(EFAME)

20240530

,can use 20-30 per dosage . Remarks: Freezing point: 5-10℃. If freezed, EFAME will return to normal physical appearance when heated to above 25℃. Temperature changes do not affect the quality.

Blends of Acid Remover and EVA (Ethylene Vinyl Acetate Copolymer)

20240415

Application: Can be used for photovoltaic EVA packaging film Features: 1. Uniform mixing and stable performance; 2. High cleanliness, no black spots, gel, crystal points, impurities, etc; 3. Strong a

High Density Oxidized Polyethylene Wax

20240321

point and low viscosity, it promotes good resin fluidity, relatively reduces the power consumption of resin mixing, reduces the adhesion between resin and mold, is easy to remove film, plays the role

Dioctyl Terephthalate (DOTP)

20230829

Chemical Name: Di-2-ethylhexyl terephthalateCAS NO.:6422-86-2 Molecular Formula: C24H38O4 Molecular Weight: 390.50 g/mole Melting Point: -50 ℃Boiling Point: 380℃ Appearance: Transparent liquid Pr

1, 3, 5-Tris (2-hydroxyethyl) Cyanuric Acid Theic CAS No. 839-90-7 Stabilizer Plasticizer Water-Born

20220607

point: 133.5 - 137ºC Acid value: ≤1.0(KOHmg/g) Moisture: ≤0.3% PH: 6.5-7.3 Turbidity: ≤1.0PPM Packing: 25Kgs 500Kgs 800Kgs plastic woven bag lined with plastic bag. Application: the prod

PC(Polycarbonate) Flame Retardant

20230828

point ℃ 95~115 PH - 6.4~6.8 Vertical burning grade - UL94-V0(≥1.6mm) III . Product Features 1. The product is not deliquescent, not hydrolyzed, has excellent fireproof performance, and becomes c

PVC Resin Cas No.

20230911

CAS No.:9002-86-2 EINECS number :208-750-2 Subformula :-[CH2CHCl]-n Melting point :302 Refraction rate :1.54 (20 C) Density: 1.4g /mL at 25 °C(lit.) Items SG3 SG5 SG7 SG8 K Value 72-71 68-66 62-60

Optical Brightener OB for Plastics

20220926

Point:357~359°C Purity:≥99% Uses Mainly be used in whitening of polyester and plastic, as well in whitening of Nylon during polymerization. For whitening of polyester and nylon; also used in AB

Brominated Polystyrene

20160705

point °C ....................................... 150 min. Volatile% ...................................................0.3 max. BPS 7010 Appearance ................................... White gr

Zinc Borate 2335

20180515

point (℃) 980 Temperature of dehydration (℃) > 320 Refractive index 1.58 Application: Zinc Borate 2335 has small particle size so that it own average particle distribution and fine dispersion pe

Industry Grade Environmental Plasticizer DOP Liquid

20230809

point: 190-195 * It can also be used in paint, dyes, dispersants, etc. , DOP plasticized PVC can be used to manufacture artificial leather, agricultural films, packaging materials, cables, etc. Our

PA Red Phosphorus Masterbatch(RP/MB-PA50)

20231129

point 'C 300 min Flammability UL94 V-0(3.2-1.6mm）% 10-15 Suggestions: 1. This product should be used in dark products (such as black). 2. In some FR system, you can add ATH/MDH or zinc borate as FR

PE Wax PW-300

20200702

point 105-120 ℃ Viscosity(CPS) 50-70 Acid number 4-7 CAS No. 09002-88-4 Package. 25kg/bag with PP bag and PE inner or Kraft paper bag. 550kg/bag Woven bag. For 20 container, we can load 1

PVC Impact Modifier Chlorinated Polyethylene CPE 135A

20230810

point of PVC. specification unit V alue Appearance --- White Powder Chlorine content % 35±2.0 Heat of fusion J/g ≤2.0 Remains (40 mesh) % ≤2.0 Volatile matter content % ≤0.5 Remains crysta

Antioxidant 425 CAS NO.88-24-4

20230310

Chemical name: 2,2’-Methylene bis(4-ethyl-6-tert-butylphenol) CAS No.: 88-24-4 Molecular formula: C25H36O2 Molecular weight：368.54 Appearance: White powder Melting point，℃：≥ 122 Heatin

Antioxidant 168, Phosphite 168

20230315

Appearance White Powder Assay ≥ 99% Bulk Density 0.55-0.65g/ml Specific Gravity@20oC 1.03g/ml Melting Range 183-187oC Flash Point 225oC Synergistically combined with other antioxidants, comprise

Calcium Stearate

20170330

Point ( C ) : 140-158 Chloride (%) : Almost Nil Fineness (% pass through 200 Mesh B.S.) : 99.9 % min PACKAGING : 10 Kg in PP bags with inner PE liner. ORIGIN OF COUNTRY : Thailand MANUFACTURER :

Tri Octyl Trimellitate (TOTM)

20181221

point:258 ℃/ 0.13 kPa Refractive index (20℃):1.483~1.485 Viscosity (20℃):252 MPas Product standard:HG/T 3874-2006 Trioctyl Trimellitate Colour:APHA 100 Max Specific Gravity:0.992 +/- 0.005

UV Stabilizer UV- 328

20190719

light-resistant containers Quality data Assay (HPLC) 99.0% min Melting point 79-87 Volatiles Content 0.5% max. Ash content 0.1% max Transmittance (460) 96% min Transmittance (500) 97% min

UV Absorber UV P Cas No.2440-22-4

20230310

Chemical name: 2-(2'-Hydroxy-5'-methylphenyl)benzotriazole CAS No.:2440-22-4 Molecular formula:C13H11N3O Molecular weight:225.3 Appearance: White to yellowish crystal powder Melting point,℃:128-13

Light Stabilizer Ls 119 Cas No.106990-43-6

20230226

point:115~150℃ Ash content:≤0.1% Transmittance: 425nm 93.0%min 450nm 95.0%min LIGHT STABILIZER LS-119 is used for the light stabilization of polyolefins, particularly polypropylene fibers and p

Antioxidant 1035 Cas No.41484-35-9

20230310

point,℃:63-68 Ash,%,≤0.03 Volatility,%:≤0.1 Transmittance, %: 425nm ≥ 95 500nm ≥ 97 ANTIOXIDANT HONOX-1035 is a sulfur containing primary antioxidant and heat stabilizer which is widely us

Ope Wax OA-103H

20240122

Appearance white powder/round beads Acid value (KOH/g) 23-29 Penetration (dmm) <3 Drop melting point (℃) 93-101 Density (g/cc) 0.92-0.93 Viscosity@150℃(cps) 20-30

RX-971 Brominated SBS Replace HBCD Be Used in EPS and XPS As Flame Retardant

20221125

Point≥120oCAppearanceWhite or off white powderPH6.5-8.5Molecular Weight≈100000 Product Performance Brominated SBS (RX-971) has good thermal stability, and according to the research, it bears rel

Dpt Blowing Agent

20220823

point（℃）200（decompose）Critical temperature（℃）205Gas evalution（20℃，101325Pa），mL/g270～290Particle size120 meshes passedAsh content / ％ ≤0.5Water content / ％ ≤0.5pH6.

2,4,6 Tris (Dimethylaminomethyl) Phenol- Ancamine K54 Cas 90-72-2

20221208

point is about 250℃, 130-13Chemicalbook5℃ (0.133kPa), the relative density is 0.972-0.978 (20/4℃), and the refractive index is 1.514. Flash point 110℃. It has ammonia odor. Insoluble in cold

Di Tert Butyl Peroxide CAS:110-05-4

20230314

Di Tert Butyl Peroxide - DTBP Appearance: Pale yellow or colorless transparent liquid Molecular Formula: C8H18O2 Density:0.794 g/cm³ CAS :95-92-1 EINECS:203-733-6 Melting point: -30 ℃ Boiling

Acrylic Processing Aid 401

20181201

point, while PVC processing aid with high viscosity will increase the tensile strength and Vicat softening point. Acrylic processing aid can be widely used in clear and opaque PVC profile, PVC pipe,

Ultraviolet Absorbent UV-284 BP-4 UV Absorber UV Stabilizer BENZOPHENONE-4

20160711

Point: 170 min Loss On Drying: 5.0%max Heavy Metals(ppm): 20max Specific Extinction: at 285nm.460min at 325nm.290min Description & Applications: 　　 It is water-soluble and mainly applied in man

Cresyl Diphenyl Phosphate

20140820

Appearance clear liquid Phosphorus content, wt % 9.1 Specific Gravity@25℃,g/cm3 1.195～1.215 Viscosity Range@25℃,cps 30～50 Acidity,mgKOH/g Max 0.1 Flash Point@℃ Min 230 Applications : CA﹑C

Fischer Tropsch Wax, FT Wax for Hot Melt Adhesives, PVC, Masterbatches

20230326

points ranging from about 45 - 106ºC. FT wax can be used in: 1. Hot melt adhesives. 2. PVC Lubricants. 3. PVC Stabilizers. 4. Masterbatches. 5. Asphalt modifiers. 6. Rubber Protective waxes. 7.

Wood Rosin

20161224

point 2,Soluble in alcohol sovent 3,Good compatibility with a variety of polymers Application:1,Aqueous links,alcohol-soluble inks 2,Aqueous varnish. 3,Soldering flux and aquesous adhesives

Dioctyl Phthalate DOP

20130311

point(open) o C≥ 210 10 205 Packing: 200kg/metal drum, 16MT/20'FCL Uses:It can work well in cold, hot, light place, it is a good electrical isolation matter. It often works with phthalate plastici