EC21 Product Catalogs - resin softener

LH-007 Strongly Acidic Styrene Type Cation Exchange Resin

20251029

this product is the cation exchange resin that is sulfonated styrened 7% styrene copolymer.It is mainly used for softening hard water and pure-water preparation and also used for hydrometal-lurgy,sug

Colophony Gum Rosin for Sale Ww Grade

20250225

Grade X WW WG N M K Appearance Transparent Solid Color slightly yellow pale yellow yellow deep yellow yellow brown yellow red Correspond to the Standard Glass Color Piece of Rosin Softening Point (R&

C9 Petroleum Resin

20250224

BTack L series is a type of low-molecular-weight thermoplastic aromatic C9 resin that is produced through a catalytic polymerization process using the C9 fraction, a by-product from the ethylene crac

Weakly Acidic Cation Exchange Resin

20240914

BC86 is an acrylic – based macroporous weak acid cation exchange resin containing carboxylic groups. It can be used in the cases of softening, dealkalizing, deionization and chemical processing. It

C9 Petroleum Resin

20240702

resin is fully compatible with nature rubber, various kinds of synthetic rubber, such as SBR,BR,CR,NBR,IIR and PE,PP,SIS,SEBS,EVA. Product Specification: Item Softening Point (℃) Color Gardner(#) A

Strongly Acidic Ion Exchange Resin

20240403

softening Amberlite IRA-120 Preparation of pure water Dowex 50 Wet metallurgy KY2-8 Rare element separation Diaion SK-IA Precautions Resin should be wet state preservation. The best temperature is ab

Phenolic Resin 2402

20200512

Resin 2402 Appearance Faint yellow platy and lump Softening point: 85-115 °C Hydroxymethyl 9-15% Free phenol <5.0% Ash content: <0.3% 4.Applications: 1.Produce end coating for external use, lacquer

Gum Rosin Ww Grade

20231220

softens and melts under the influence of heat,and burns with a bright but smoky flame.Plant resins are valued for the production of varnishes,adhesives,they are also prized as raw materials for the s

Epoxy Resin

20210414

Softening Point：94-95℃ Epoxy Equivalent eq/100g：0.117-0.125 Organic Chlorine eq/100g：≤0.0028 Inorganic Chlorine eq/100g：≤0.0005 High viscosity of epoxy resin with good mechanical proper

Maleic Modified Rosin Esters

20231012

resin that exhibits strong adhesion, good color stability, and heat stability. easily dissolved in char, esters, turpentine solvents, the series "MRP" products can completely soluble in petroleum sol

Polyimide Resin Powder

20230619

We could supply below polyimide resins: 1. PIR-001 Visual: Fine yellow powder Particle size:30-40um Gravity:1.3g/cm3 Softening temp.:110-130℃ Hardening temp.:230℃ Application: used as solid lu

WW Grade Gum Rosin

20221021

WW grade gum rosin Specifications : Appearance: Pale Yellow Correspond to the standard glass color piece of rosin. Softening Point (C) 76 Acid Number (mg.KOH\g) 166 Ash Content Percent by mass Max.

Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether MP15 MP25 MP35 MP45 MP60

20200311

Index ： Item Standard Test method(Q/321284GHI 02-2019) MP15 MP25 MP35 MP45 MP60 Appearance fine white powder Vicat softening temperature 48-52℃ Volatile (≤%) ≤0.5% ISO 1269 Chlorinate mass f

Gum Rosin Resin

20170112

Specifications CAS No. 8050-09-7 Other Names: Gum Rosin, Colophony MF: C19H29COOH EINECS No.: 232-475-7 Type: Synthetic Fibers, Synthetic Resin and Plastics, Synthetic Rubbers, Gum Rosin Model Numbe

Hydrocarbon Resins (C5/C9 Petroleum Resins)

20180105

C5 and C9 Petroleum Resin Petroleum Resin 1.For road marking paint,rubber,adhesive 2.Good adhesiveness,compatibility 1.Specification: C9 Color (in 50% Toluene) from No 3 to No.6 Soften Point (DC

001&TIMES8; Styrene Series Gel Strong Acid Cation Exchange Resin

20180725

resin volume =3:1 Regenerant Flow Rate 2 to 4 BV/h Regenerant contact Time At least 40 minutes Service Flow Rate 10-25m/h 4.Applications It is used in water softening applications and Demineralizati

Hydrogenated Hydrocarbon Resin

20231214

resin solid in Toluene) Ga # Max9# (ASTM D1544) Softening point (Ring & Ball) °C 115-125 (ASTM E28) Acid value mgKOH/g Max 0.10 (ASTM D974) Bromine value g /100g Max.30 (ASTM D1959) Ash content % Ma

Printing Ink Resin for Extrusion Lamination-LW-AS-D

20120515

resin Specification: Appearance: tranparencin viscous liquid Scope of usage: PE PP Solution: alcohola ,alcohol-ester and alcohol-water Solid percentage: 50±2% Viscosity:1000-2500mPa.s Soften p