EC21 Product Catalogs - 10 in 1

CT-20C Multifunction Cable Tester 10-way Switch Wire Tracker 16 in 1 Cables Checker with LED

20241210

CT-20C cable tester CT-20C cable tester a detection tools for many cables including USB, RCA, DIN, Powercon, Speakon, RJ45, 6.3mm Jacks, 3.5mm Jacks, USB type C, and etc . Easy to carry, operate and

Custom Optical Grating Replication Service | OEM Grating for Spectrophotometers

20260420

in 3-5 weeks. Mass production 6-10 weeks based on quantity and complexity. Q: Do you offer coating services? A: Standard aluminum coating is provided. Gold, silver and custom coatings are available o

Fluke II500 - Acoustic Imager (2-52 Khz)

20250328

1-10)This model does not show leak rate or leak cost estimationFrequency: 2 to 52 kHz In The BoxAcoustic ImagerPower supplyLithium-ion smart battery packUSB-C cableRugged hard carrying caseArray sens

Fluke 87V Industrial Multimeter 2025

20250321

19,999 counts in high–resolution modeAnalog32 segments, updates 40/secFrequency19,999 counts, updates 3/sec at > 10 HzWarrantyLifetimeBattery LifeAlkaline~400 hours typical, without backlightShock1

FLIR E4 Thermal Imager with MSX Technology 80 60 (4,800 Pixels) with WiFi

20250221

in-picture, thermal blending, digital cameraColor palettes: Iron, Rainbow, Black & WhiteWIFI ConnectivityIncludes FLIR TOOLS softwareWarranty1 YEARSWarranty Details10-Year Detector Protection5-Year B

New Fluke TI480 PRO 60HZ Thermal Imager

20250104

1280 x 960 with SuperResolutionSuperResolutionYes, in software. Captures and combines 4x the data to create a 1280 x 960 imageIFOV with standard lens (spatial resolution)0.93 mRad, D:S 1065:1Field of

Automatic Digital Enamel Rater for Cans

20241225

in can-making industry. Advantages: 1) Equipped with multi-channel automatic sampling device, can test a variety of can samples at one time. 2) Patented design liquid level control system, automati

Laser Meters

20241206

in electronic angle sensor; Specfications: Model No. Z-40 Z-60 Z-80 Z-100 Z-120 Measuring Range 0.05~40 0.05~60 Z-80 Z-100 Z-120 Measurement Accuracy ±1.5mm Laser Class Ⅱ Laser Diode 635nm , P＜1

Three-box High and Low Temperature Alternating Test Chamber

20241112

10% 50HzPower（A）8.5kW/12.0kWoperating environment5℃～＋28℃ ≤85% RHNote:1、 the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured2、The abov

YH800 Intelligent Digital Pressure Calibrator

20241106

10~50℃, automatic temperature compensation, stable product performance;◆Data storage: the data quantity is not less than 10,000 records; ◆Data export: the data can be directly imported into the

New BEL M124A Laboratory Balance - 120g - 0.1mg

20241028

New BEL M124A laboratory balance - 120g - 0.1mg New equipment in its original packaging Technical parameters: Precision balance reference M124A Readability: 0.1 mg (10-4 g) Maximum capacity: 120 g Re

Performance Test System of Floor Spring

20241019

1.5%; 9． Angle sensor: accuracy 1%, resolution 0.1% ° 8. Action: in the whole process of opening / closing, it is gentle without obvious shaking (except the sample quality); 10．Computer and tes

Industrial Videoscopes-Industrial Videoscopes Manufacturer

20241019

Industrial videoscopes. Industrial videoscopes manufacturer.Industrial videoscopes sales.Industrial videoscopes wholesale. We have been engaged in the industrial videoscopes field for more than 10 ye

Dissolved Ozone Meter Intelligent Online Water Ozone Analyzer Tester Sanitizer Ozone

20240929

conditionsenvironmental temperature of 0~60℃, relative humidity ≤90%◇Output load:<750Ω(4-20mA)◇Working voltage: 220VAC10%,50/60Hz.◇Dimension :96x105×168 mm◇Hole size:92×92mm

UTOCO Handheld Laser Detector with Tdlas for Natural Gas Distribution Pipeline

20240926

100000ppm·mDistance50 metersResponse timeT90 < 0.1 secondWorking temperature-20ºC~50ºCStorage temperature-20ºC~60ºCHumidity<99% RH (no condensation)Explosion-proof gradeEx ib IIB T4 GbIngress pr

Portable Hardness Tester

20240925

170-960) HLD, (17-68.5) HRC, (19-651) HB, (80-976) HV, (30-100) HS, (59-85) HRA, (13-100)HRB ● Measuring direction: 360° ( ↓ ↖ ↗ ↘ ↙ → ← ↑ ) ● Hardness Scale: HL, HB, HRB, HRC,

EMCEE Model 1153 Digital Conductivity Meter

20240813

in Specifications D975, D1655, and D7566) Continuous standard electrical conductivity range from 1 to 2,000 picosiemens per meter (pS/m)Available in other conductivity ranges (from 2000 - 10M pS/m)LE

Steel Bar/Steel Tube/Steel Pipe/Rebar Bending Testing Machine

20240803

1 the curved heart diameter of steel tube uses:------------------φ6 —φ10 2 the curved heart diameter of steel tube use---------------------φ10—φ25 1.φ6-φ10 2.φ10-φ25 the exterior dimensio

Wireless LoRaWAN Temperature and Vibration Sensor Industrial LoRa IoT Solution for Smart Industry

20240730

in 8500mAH battery； Ø Velocity Measurement Range : 0.1-199.9mm/s; Ø Displacement Measurement Range : 0.01-1.99mm/s; Ø Frequency Response Range:＜1000Hz Ø High Accuracy:±10%@100Hz; Ø Temperat

Cuvettes&Cuvettes(Glass)&Cuvettes (Quartz)

20240705

For more product information, please visit our website: https://www.biogene-bio.com Product Information Cat. No.Product NameSizeFeaturePackageBCG-5Cuvette5mmglass10pcs/boxBCG-10Cuvette10mmglass10pcs/

Digital Lab Liquid Brookfield Rotational Viscometer

20240705

in Chinese and English) Speed (r/min) 0.3/0.6/1.5/3/6/12/30/60 Measuring range 1~2000000mPa.s (1-10mPa.s, need to choose 0# rotor) Rotor 1 - 4# (standard); 0# rotor (optional) Viscosity accuracy 0.0

Film-stretching Instrument | Laboratory Film Stretching Machine

20240628

10 Applicable materials PE, PP, PET,PTFE, PVDF, etc. Sample thickness 0.02-2mm Sample size Min.95mm×95mm Max.110 mm×110 mm Stretching ratio 10:1（min. sample） Stretching speed 0-500mm/s (steples

Thermal Shock Test Chamber

20240624

10 seconds. Technical specifications: Model HD-CTS2-01J HD-CTS2-02J HD-CTS2-03J Basket volume 48 L 120 L 190 L Basket dimensions (D*W*H) 300*450*350 mm 500*600*400 mm 600*700*450 mm External dimensi

Shortwave Infrared SWIR TEC Cooled Thermal Camera with InGaAs Detector for Target Measurement

20240620

1.7μm Resolution 640×512 Pitch 15μm Quantum efficiency >70% Cooling temperature TEC Cooling temperature -20℃ -40℃ -20℃/-40℃ Functional indicators Frame rate Internal sync 25/50/100Hz, ex

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber

20240603

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber Dustproof test chamber is designed according to the standards of GB/T10485-2007, GB2423.37-2006 test L, GB4208-2008, IEC60529 (IP code), GB7001-1986

Extra Large Measuring Machine Atlas Series UCC Pantec Controller AC-Dmis for Large Workpieces

20240530

152515 1500 2500 1500 10 Atlas153015 1500 3000 1500 10 Atlas153515 1500 3500 1500 10 Atlas203015 2000 3000 1500 10 Atlas203515 2000 3500 1500 10 Atlas204015 2000 4000 1500 10 Atlas253015 2500

RLK607 Contact Infrared Radiometer

20240530

100μW/cm*cm～100mW/cm*cm (automatic range switching) Display resolution ±1.0μW Surface temperature to be measured 10℃～55℃ Surface size to be measured Bigger than Φ60mm, flat Measure sam

Professional FI Manufacturer for Power Distribution Network Intellegent Wireless Office System

20240520

10A±1%，I>10A±2%  Sensor factory automatic calibration, to ensure consistency；  intelligent motor control flop；  Support remote, telemetry, remote control, remote adjust；  There

HTT-02 Hot Tack Tester

20240517

1~9999s(Heat Seal ) Dwell Time 0.1~9999s(Hot Tack ) Sealing Pressure 0.15MPa~0.7MPa Sealing Jaws 50mmx10mm Teflon Coated Jaws Heating Double Heating Load Cell 200N(Optional:30N50N100N, etc) Accuracy

Original Schmidt Test Hammer HT-225

20240430

concrete test hammer (schmidt hammer) Applied to test compressive strength of hardened concrete Measuring ranges: 10-60MPa Impact energy: 2.207J Size: L280mm*D54mm N W: 1kg Concrete Test Hammers are

Piston Type Circulating Real Gas Flow Standard Device

20240417

Piston Type Circulating Real Gas Flow Standard Device use real gas to detect G1.6~G6 ultrasonic and thermal gas meters. In order to provide flow meter manufacturers with in-depth research on the meas

VC5000A Power Quality Analyzer

20240416

1Hz / ±0.03HzTrue RMS Voltage1.0-1000V / 0.1 / ±(0.5%+5dgt)True RMS Line Voltage1.0-2000V / 0.1 / ±(0.5%+5dgt)DC Voltage1.0-1000V / 0.1 / ±(1.0%+5dgt)True RMS Current10mA-9000A / 1mA / ±(0.5%+5d

Testing Equipment

20240416

10G, MIL-STD-202, MIL-STD-750, MIL-STD-883, MIL-STD-901D, IEC60068-2, ISTA, ASTM, IEC68-2-27, UN38.3, UL2580, ISO 2248, ISO-2247…… Besides, CME has an excellent design team and R&D team, which pr

High Voltage Wire Harnesses/Cables Testing Bench Top(Table) for Automotive

20240412

in the cable assembly of automotive industry，etc. Function and brief characteristics: 1: Equipped with over voltage protection, over current protection, leakage protection, which can greatly prote

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

144P SiemensSITRANS P DSSITRANS P ES SMARLD301TT3011 ViatranI/A Pressure WikaUNITRANST32H1 YokogawaEJAYTA 110, 310 and 320 1Sensor Trim not supported The 754 supports the commands contained in HART

KRD100 Multi-Function Packaging Testing Laboratory Incline Impact Test Equipment

20240402

KRD100 Incline Impact Tester KRD100 series incline impact tester simulates the ability of product packaging to resist shock damage in the actual environment, such as handling, stacking of shelves, sl

Hot Tack Tester ASTM F2029 Hot Seal Strength Testing Instrument Plastic Packaging Hot Tack Strength

20240325

1~9999s Hot Tack Dwell Time 0.1~9999s Sealing Pressure 0.15MPa～0.7MPa Sealing Jaws 50mmx10mm AnchorTeflon Coated Sealing Jaws Heating Doubt Heating Load Cell 200N Optional:30N50N100N500N） Accurac

MDKN Gas Meter Endurance Test Bench

20240308

19, EN1359-2017 Diaphragm Gas Meter -- 6.4.1 Endurance. The device can meet the endurance test requirements of G1.6, G2.5, G4, G6, G10, G16 specifications of household gas meters and industrial gas m

Liquid Chromatograph

20240308

10 workstation meets various regulatory requirements. Reliable results - meeting customer's accurate requirements for results Compared with imported instruments, the analysis results have a high degr

E5071C ENA Vector Network Analyzers

20231007

123 dBHarmonics:-25 dBcMaximum Frequency:20 GHzNoise Floor:n/aNumber of Built-In Ports:2 or 4 portsNumber of Internal Sources:n/aOperating System:n/aOutput Power:10 dBmType:n/aTrace Noise:0.003 dB rm

BST-01 Ampoule Breaking Tester

20231101

in the testing process. ISO 9187, GB 2637, YBB00332002 Test Process An ampoule sample is place on the fixtures and the pressing head is driven down by the power system at the speed of 10 mm/m. The b

Bruker Tracer 5i Handheld XRF Spectrometer

20230720

140 eV @ 250,000 cps Mn Kα; resolution for optimum light element analysis.Analysis range: Detects from Na to U; analyzes from Mg - USize: 27.3 cm x 9.4 cm x 29.5 cm (10.75 in x 3.7 in x 11.6 in) L x

High Low Temperature Test Chamber

20231013

1HD HLT702HD HLT705HD HLT710HD Internal volume 64 L 110 L 252 L 504 L 1000 L Internal dimensions (D*W*H) 400*400*400 mm 450*450×*550 mm 600*600*700 mm 700*800*900 mm 1000*1000*1000 mm External dime

100kW/200kW/500kW/800kW/1000kW/1200kW/2000kW AC Dummy Resistive Load Bank for Generator Load Test

20230615

100kW/200kW/500kW/800kW/1000kW/1200kW/2000kW AC Dummy Resistive Load Bank for Generator Load Test Following is 1000kW load bank for reference.Our resistive load bank rangeis: 3kW~10000kW for single l

18650 Lithium Battery

20231023

1700, and 32700, to big cylindrical cells like 32140, 40135, and 4680 series. A cylindrical cell is a cell enclosed in a cylinder-shaped case, it has an excellent energy density and the high voltage

Widely Use Brightness Tester Whiteness Meter Test Machine

20220514

1 Indication drift ≤ 0.1 Indication error ≤ 0.5 Repeatability error ≤ 0.1 Specular reflection error ≤ 0.1 Sample size Test surface ≥ φ30mm, thickness ≤ 40mm Power AC 220V ± 10%, 50HZ, 0

Olympus Omniscan SX 16:64 Flaw Detector

20230728

Specifications:HousingOverall dimensions (W x H x D): 267 mm × 208 mm × 94 mm (10.5 in. × 8.2 in. × 3.7 in.)Weight: 3.4 kg (7.5 lb) with battery Data StorageStorage devices: SDHC card or most sta

China MIL-STD-810H Military Standard Dual Blowing Dust Sand Proof Resistance Test Chamber Machine

20240114

Overview Dual Blowing Dust and Sand Chamber is designed as per MIL-STD-810G now MIL-STD-810H 510.5 test standard. It is to test the dust proof performance of enclosures of products. Engineering Team

Tension Tensile Testing Machine Textile Tension Test Machine

20220901

Universal Testing MachineThis Series machine can be applied to test lots of materials in rubber tensile elongation, compression, tear, big size peel (can 90 degrees and 180 degrees) and other mid-f

Borderline Pumping Temperature of Engine Oil Tester

20231020

10. The program automatically controls temperature by nonlinear curve, and measures yield stress and apparent viscosity; 11. The temperature control curve can be edited and drawn in real time accor