EC21 Product Catalogs - 120

New BEL M124A Laboratory Balance - 120g - 0.1mg

20241028

New BEL M124A laboratory balance - 120g - 0.1mg New equipment in its original packaging Technical parameters: Precision balance reference M124A Readability: 0.1 mg (10-4 g) Maximum capacity: 120 g Re

Low-pressure Mercury Lamp Light Source CEL-LPH120

20221027

120W ultra-strong ultraviolet low-pressure mercury lamp, the main output wavelength is 254nm, 185nm uses a serpentine lamp, the irradiation area is 128*128mm, can realize downward irradiation and sid

Snap On Compact Low Pressure Regulator Basic+Standard Type for A120is/ A121is/ A122is/ A127is

20230410

Introduction A120isD1: Low pressure gas regulator with 20mm inlet A122isU1: Low pressure gas regulator with 8mm outlet A127isU2: Low-pressure regulator with 27mm inlet S100 Orange: Snap On Compact Lo

Fluke PTI120 Pocket Thermal Camera

20230519

In the box: Fluke PTi120 Pocket Thermal Camera (9 Hz)Soft caseLanyardUSB cable Specifications: Compact Fluke PTi120 Pocket Thermal Camera Key FeaturesIFOV (spatial resolution)7.6 mRadInfrared resolut

100V 120A 18650 Finished Battery Pack 100v200a 300a Tester for Lithium Battery Pack Assembly Line

20240109

100V 120A 18650 Finished Battery Pack Comprehensive Tester For Lithium Battery Pack Assembly Features The comprehensive test equipment for finished battery is a fast and accurate device for testing t

Megger BAKER PPX30A 30KV 120V

20231115

, Torque , Total Station , XRF Analyzer , 3D Printer , 3D Scanner,ETC. turn to Geomultimeter.com! 30 kV Auxiliary HiPot Power Pack 120V AC w/ Armature test Order #: PPX30A-120V Mfg #: 99-350-085RC

Visionix VX120 AR / K / Topographer / Aberrometer / Pachymeter / NCT

20210825

The VX 120 is a unique, complete, and fully automatic diagnostic screening device. The VX 120 features variations of refraction, screening for glaucoma, cataracts, corneal pathologies such as keratoc

FLIR T840 Thermal Imaging Camera

20250226

120°C (-4°F to 248°F); 0°C to 650°C (32°F to 1202°F); 300°C to 1500°C (572°F to 2732°F)Spot Meter: 3 ea. in live modeThermal Sensitivity/NETD: <30 mK at 30°C (42° lens)METER DATA Display

FLIR E4 Thermal Imager with MSX Technology 80 60 (4,800 Pixels) with WiFi

20250221

INProduct Length13.00 INProduct Width16.00 INData LoggingYes HTS/Schedule B Number9027.50.4020ECCN Number6A993Calibration IncludedNoneBattery TypeLi-ion Power Supply Voltage120V/220V Universal

Valid Magnetics Air Cooled / Blower Hysteresis Dynamometer for Motor Test, Torque, Speed and Power

20250205

120 — — 25000 By Fan HD-303 30 700 — — 150 — — 25000 By Fan HD-503 50 1000 — — 200 — — 25000 Convection HD-603 60 140 — — 300 — — 25000 Convection HD-144 140 2000 — —

New Fluke TI480 PRO 60HZ Thermal Imager

20250104

120V/220V Universal, Battery PoweredTi480 PRO General SpecificationsKey featuresDetector resolution640 x 480 (307,200) or 1280 x 960 with SuperResolutionSuperResolutionYes, in software. Captures and

WDLYCH 0-5 0-10 Megaohm Resistance Meter AC DC Insulation Monitor for Marine Electrical Net On Ship

20241231

120 individuals. The company is a member of the National Standardization Committee for Electric Meters & Instruments. Wei Dian Union concentrates on the fabrication of electric measurement instrument

Laser Distance Measurer

20241206

Features: Measuring range is optional; Accurate and stable distance measurement Language customization is available; Specifications: Model Number Z-40 Z-60 Z-80 Z-100 Z-120 Measurement Range 0.05~40M

YH800F Portable Fully Automatic Pressure Calibration Device

20241105

120% of the range, an alarm will be issued), sensor failure, etc., to protect the safety of the calibrated meter; ◆ The pressure calibration system can achieve full range automatic pressurization,

Fully Automatic Online Surface Defect Detection Equipment BQJ-D4100

20240703

120m/s Adaptable rolling temperature: ≤1200℃ A Surface Inspection System is a technology used to detect and analyze defects or irregularities on the surfaces of various materials. These systems a

Plastic Test Device Small Single Screw Extruder with Casting Unit

20240628

120rpm Mold head width: 250mm Mold opening range: 0-0.8mm Roll surface width: 300mm Linear speed: 0-10m/min Width of casting roller surface: 300mm Casting roller surface diameter: 215mm/120mm Working

Walk in Temperature Humidity Test Chamber

20240624

120℃,150℃ optional) Humidity range 20%~98%R.H. Temperature fluctuation ≤0.5℃ Temperature uniformity ≤2.0℃ Temperature deviation ±2.0℃ Humidity deviation ±3%(≥75%RH); ±5%(<75%RH) He

Switch Rail Lateral Wear Gauge

20240603

规格模型 Lj-jgcm-i类型1.垂直尺:数字2侧尺:数字测量范围 1.垂直尺:92-193.侧向尺:0-120 决心数字尺:0.01准确性0. 01 校正块可选择的

Gear Measuring Machine for Worm Wheel Rotary Table,Bevel Gear,

20240531

120 Tested gear module（㎜） 0.7～15 0.7～20 0.7～20 1～20 1～20 1-40 The maximum outer diameter of the tested gear（㎜） 300 450 650 800 1000 1200 Measurable spiral angle range

RLK607 Contact Infrared Radiometer

20240530

temperature +10℃～+55℃, non-condensing Storage temperature -30℃～+65℃, non-condensing Dimensions Φ60mm*120mm Product weight 700g Product housing Aluminum alloy housing, black spray

Multifunction Strength Tester

20240430

parameters Maximum pullout force of the detector 40kN Work the piston stroke 10mm Chassis fulcrum diameter 120mm Minimum reading: 0.01kN Indication error: Less than ± 2% F.S Weight: 4kg

Piston Type Circulating Real Gas Flow Standard Device

20240417

120 L, the maximum working pressure is 10 kPa, and the cylinder volume standard uncertainty Urel=0.05% (k=2), which meets the flow range of (0.016～10) m³/h for different media of electronic gas me

High Voltage Wire Harnesses/Cables Testing Bench Top(Table) for Automotive

20240412

±3%±0.1 100K-1MΩ; ±5% 0.01-75Ω; ±3%±0.01 ICR Test Frequency 50Hz-1MHz optional Test Signal Level 0.1V-2V Bias Current Internal: 0-1A optional External: 0-120A optional

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

120883001C3051, 3051S3044C64431443244, 3144P SiemensSITRANS P DSSITRANS P ES SMARLD301TT3011 ViatranI/A Pressure WikaUNITRANST32H1 YokogawaEJAYTA 110, 310 and 320 1Sensor Trim not supported The 754

KRD101 Custom Printed Packaging Cardboard Compression Testing Machine

20240402

1200×1200 (extension plate is optional) Working Stroke (mm) 0 ~1500 (can be customized) Pressing Speed (mm / min) 0~10 (can be set arbitrarily) Return Speed (mm / min) 0 ~120 (can be set arbitraril

Octane Testing Engine Waukesha Cfr ASTM D2699 D2700

20240314

120 octane number range. Octane Testing Engine Applications FTC-M2 Octane Testing Engine applies to the user who has the requirements of wide source test samples, large test quantity, long continuous

WF-EDU-01 Motor and Propeller Test Kit

20240313

is specially designed for large propulsion system testing. This thrust stand is capable of testing max thrust 200kg, max torque 15NM electrical propulsion system. The max propeller can be 120 inch.

ZHLB Bell Porver

20240308

120m3/h） Flowmeter Specification ZHLB-1000(DN50、DN40、DN32、DN25） ZHLB-2000(DN80、DN50、DN40、DN32、DN25） Gas Meter G6～G100 Temperature Test(0～50)℃ Environment Temperature (20±2)

Gas Chromatography

20240301

120 ℃/min Cooling method; Rear door opening+air-cooled or liquid nitrogen Temperature range: 7 ℃~450 ℃ above room temperature Injection port: can be equipped with filling columns, splitters, an

Thermal Shock Test Chamber (Two Zones)

20231013

120 L 190 L Basket dimensions (D*W*H) 700*200*300 mm 500*600*400 mm 600*700*450 mm External dimensions (D*W*H) 2223*1125*2030 mm 2750*1200*2000 mm 2350*1640*2640 mm High temperature area Temperature

EMI Test Receiver

20240102

120kHz• Connect PC via USB cable and software can run on Win7, Win8, Win10, Win11 What is EMI ?EMI (Electromagnetic Interference) is electronic noise that interferes with cable signals and reduces

WDW Electronic Pellets Compression Testing Machine

20120515

speed: 0.2mm/min-500mm/min; 6) effective test space: 0-400mm; 7) effective test width: 360mm 8) power supply: 220V, 50Hz, power: about 750Kw; 9) dimension: 630*380*1570mm; 10)weight: about 120kg.

ST3007 Digital Measuring Projector

20180729

and size of L800*W550*H650 mm Measurement L770 * W550 * H1100mm Weight Approx. 120kg Power supply 110V/220V(AC), 50/60Hz, power of 400W Accessories for option Mini-printer, software, Edge detector

1000kn Computer Servo Steel Hydraulic Universal Testing Machine

20211029

Roller Space:120mm 23.Bending Test Roller Width:140mm 24.Bending Pressure Head Diameter:φ30 25.The host machine overall dimension:(800×600×1950)mm 26.Weight: About 2000Kg 27.Voltage:380V/50Hz

Ozone Test Chamber,Ozone Colorfastness Tester AATCC 109 ISO 105 G03 ASTM D1149

20200216

120×110×165 cm STANDARDS AATCC 109 ISO 105- G03 GB/T11039.3 etc INCLUDES Rotary specimen rack OPTIONAL TN1418B-1 Dynamic stretching apparatus TN1418B-2 Static stretching apparatus

Ponovo T1000 Primary Injection Test Set for Different Types of Relays

20230609

120s at 1000AAC Voltage (U1) Range250V/750VAAccuracy0.5%Load timecontinuousDC Voltage (Udc) Range300V/750WAccuracy0.5%Auxiliary DC supply 20-240VVoltmeter0-600V ac/dcAmmeter0-6A ac/dcBinary input2Bin

Karl Fischer Volumetric Titrator MKV-710S

20170120

120 Key operation Touch panel Displays 1) 8.4-inch color LCD 800 x 600 dots 2) English / Japanese / Mandarin Chinese / Korean / Russian / Spanish / German / French 3) 1-channel display 3) Simultaneou

Analog Current Panel Meter47X47 Current Meter

20210619

Transformer over 75A,Overload 0.5A 5A 1-600V,750V,1000V,1500V Attach FJ-7 Constant Resistor 3-600V Develop 80-120V,180-220V,300-450 CosΦ:10V/5A 220V/5A 380V/5A Hz:45-55,55-65Hz Voltage:220V,380V

Vibration Meter VM-6360 for Sale

20230731

120g(Not Including Batteries) Standard Accessories Main Unit Piezoelectric Transducer Powerful Rare Earth Magnet Probe(Cone)&Probe(Spherical) Carrying Case(B04) Manual Book Optional Accessories Heads

Phantomlab ECTphan 330

20230822

Test Plate: The test plate has 4 ‘hot’ holes spaced 120mm apart for measuring pixel size in X and Y axes. Four bar patterns up to 2.5lp/cm are available for visual evaluation of spatial resolutio

IFR Aeroflex IFF-701Ti Transponder IFF Interrogator Test Set

20230627

V2.3, FGPA V025 Antenna: 1030MHZ/9.4dBi, 1090MHz/9.7dBi, serial 7216 Accessories: Antenna, Crypto Cable, BNC/TNC Adapters, AC Cord, DC Input Cable Power: 100/120, 220/240 VAC, 100W Weight: 16.0kg

Laser Measuring Tape 40m Digit Tape Measure Laser Digital Laser Measure Tape

20230316

120 wm, length 5mOperation Temperature0～40°C / 32～104°FStorage Temperature-20～60°C / -4～140°FSingle MeasurementYesLaser classclass II,650nm,＜1mWDust & Splash ProofIP 54 ProtectionAccura

EN60350-2 Figure Z1 Vessels for Cookware with CNAS Calibration Certificate

20210805

120±0.5 130±1 80±1 7 125±0.5 ≥0 <0.075 650 ≥100 <130 A 150±0.5 165±1 110±1 11 125±0.5 ≥0 <0.075 1030 ≥130 <160 180±0.5 200±1 140±1 16 125±0.5 ≥0 <0.075 1500 ≥160 <190 B 210±0

Ultra High Pressure Seals

20230706

steel pipe. Working pressure: ≤ 120 MPa Working temperature: -20 to +80℃ Working medium: water, emulsion, hydraulic oil Material: Polyurethane For more information, please visit our website .

Pipe Drop Weight Impact Tester Machine

20221130

120°V type or flat supporting plate with support and fixture; 6. Overall size: 750mm×550mm×3500mm; 7. Work table stroke: 0mm ~ 400mm; 8. Impact center and fixture center deviation: ≤2mm; 9. Powe

Programmable Hast Accelerated Aging Tester for Industry

20230727

12001300×1800×1350Steam Temperature Range Steam Temperature Range: 100ºC~135ºC, (143ºC is optional) Relative Pressure/ Absolute Pressure Relative pressure: display values indicated on the pressu

ASTM D5264 Rub Tester

20180829

Data AnchorRub Pressure 8.9 N(2lb); 17.8N(4lb) Rub Speed 20-120 cpm Number of Specimens 1 ~ 2 Power Supply AC 220V 50Hz Instrument Dimension Anchor 390 mm (L) x 480 mm (W) x 220 mm (H)

CDW-60 Impact Test Low Temperature Chamber / Environmental Chamber

20190815

120mm 6. The sample quantity can be loaded: > 60 (The impact of sample size: 10 * 10 * 55mm) 7. Digital timer: 1 minute ~ 9999 minutes, 1 minute resolution 8. Cooling medium: ethanol or other ice-fre

Low Temperature Meter / Impact Testing Machine

20190821

120mm 6. The sample quantity can be loaded: > 60 (The impact of sample size: 10 * 10 * 55mm) 7. Digital timer: 1 minute ~ 9999 minutes, 1 minute resolution 8. Cooling medium: ethanol or other ice-fre

Torque Meter Tester Testing Measuring Machine 0.15~500kg

20221112

120mA Joint terminal size 12 angles or 20 mm² Dimension 230*120*60mm Weight 2.0kg Note Can`t be used to test the continuous impact type semi-automatic electric or pneumatic tools.Can`t exceed the