EC21 Product Catalogs - digital control power supply

Fluke TI480 PRO Thermal Imaging Camera

20250226

Digital zoom: 2x and 4xTemperature measurement Temperature measurement range (not calibrated below -10 °C): ≤-20 °C to 1000 °C (-4 °F to 1832 °F)Accuracy: ±2 °C or 2% (at 25 °C nominal, whi

Fluke TIX580 Infrared Camera

20250109

power supply and battery pack charger (including universal AC adapters)Two, rugged lithium ion smart battery packsUSB cableHDMI video cableBluetooth headset (where available)Rugged, hard carrying cas

New Fluke TI480 PRO 60HZ Thermal Imager

20250104

In The Box Infrared camera with standard infrared lensAC power supply and battery pack charger (including universal AC adapters)two rugged lithium ion smart battery packsUSB cableHDMI video cable4 GB

YH800C Portable Fully Automatic Pressure Calibrator

20241225

control mode, which can quickly increase and decrease pressure and instantly stabilize; ◆ Equipped with a large capacity rechargeable lithium battery for power supply, with a working time of no les

NDJ-1C Hot Melt Adhesives Brookfield Viscosity Meter

20240705

configuration Host: 1 set External drum: 2 piece High temperature heating furnace: 1 piece Rotor: 21/#, 27#, 28#, 29# Temperature control device: 1piece Power supply, cable: 2 piece

Sand and Dust Chamber

20240624

Digital intelligent, touch input Operation mode Constant operation Input PT-100 sensor Subsidiary Timer function Safety device Overload fuse protection, ground protection, etc. Power supply AC 380V

Digital Infrared Radiometer

20240527

digital infrared radiometer Three functions: measurement control, data processing and product calibration Option Tripod, laptop (common/reinforced), filter: 3.0-5.0um、 8-14 um or user specified ·

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

Power transmitters during test using loop supply with simultaneous mA measurementMeasure/source pressure using any of 29 Fluke 700Pxx Pressure ModulesCreate and run automated as-found/as-left procedu

KRD30 Constant Acceleration Tester (Box Type)

20240402

Power Supply 3-phase AC380V±10% 50Hz Control Mode Fully closed-loop digital network (remote) automatic control + manual control Installation Condition Foundation-free, the cement floor shall be leve

Horizontal Vertical Combustion Tester

20221130

digital display can be preset); 9. Repeated firing times: 1 ~ 9999 times (digital display can be preset); 10. The use of automatic lighting device, convenient automatic test; 11. The box internal vol

AST900 Digital Pressure and Temeprature Indicator

20230623

Description: AST900 901 902 digital pressure and temeprature indicator designed with advanced technology in the world, it is small in volume, light in height and save power and completed function, it

300W Xenon Light Source System Photocatalysis Photocatalytic Xenon Lamp CEL-PF300-T8

20230614

power: 300W (100 ~ 320W continuously adjustable) 2.Display: digital display current and voltage; 3.Light Output density: 0 ~ 20 Sun continuously adjustable (1Sun = 1000W / m2 solar constant); 4.Total

Computer Servo System Double-Column Tensile Testing Machine

20210423

controlled by the computer, different traditional AC and DC motors are controlled by voltage, the control accuracy is poor in different sections.7. Test speed: 0.001 ~ 500mm/min8. Power supply: 1 wir

Computer Control YFTD300 Safety Valve Test Bench for Safety Valve Pressure Calibration and Seal Test

20230330

digital and image curve and more accurate set pressure value can be captured to print out the testing monitoring graph, which can be used as technical document archive. 5. "Safety door" device is adv

<1 Rh Ultra Low Dry Cabinet CF1 Series

20230206

control, and fast recovery time and is supplied with an anti-static body structure, adjustable shelves, wheels (except the 157 and 200 bench top), locking doors, and a decimal digital display. <1%Rh

Heating Oil Bath Series

20170216

power saving, electronic cosntant temperature. We also switched the control system of the product,whether digital or table display, all eqipped the temperature control device. Oil bath shell with b

LVLP Linear DC Power Supply

20151002

digital display (standard), LCD display (optional) or LCD touch screen display (optional) Pulsing working: could add time controller to be pulsing power supply (optional) Communication port: RS232/RS

NAVLF Ultra-low Frequency High Voltage Generator

20180827

Product introduction NAVLF Ultra-low Frequency High Voltage Generator combines the modern digital frequency advanced technology, uses computer control, boost, buck and measurement, automatically ful

CO/CO2/SO2/NO Analyzer

20210621

Power: ＜80W Work Power Supply: 220VAC ± 10%, 50Hz ± 5% Insulate Current: (0/4~20) mA (500Ω) Insulate Communication: RS232, RS485 (Choosable) Output Control: Upper and lower bound passive electr

Automatic Melting Point Tester

20230426

Power supply: 220V 50HZ power: 120W. 3. Automatic Melting Point Tester Feature 1: With refrigeration system, 3 samples can be processed at a time; 2: One-key automatic detection function, effectively

Apparent Viscosity At High-Temperature and High-Shear Rate Tester ASTM D548

20230201

control method: digital display PID temperature control 3. Temperature control range: normal temperature to 250±0.5℃ 4. Heating method: metal bath heating 5. Pressure adjustment: high precision ne

WDW-S100 Electronic Universal Testing Machine

20120515

Control mode LCD digital display control 11 Power supply (should be firmly grounded) -380V±10%, 50Hz; 1.5KW 12 Dimension of main machine (L*W*H) 850*555*1900mm 13 Weight About 800kg

JB-300S Digital Display Semiautomatic Impact Testing Machine

20211028

JB-300S Digital Display Semiautomatic Impact Testing Machine Equipment type and name JB-300S Digital Display Semiautomatic Impact Testing Machine Equipment usage and characteristics The equipment is

TN11328 Electronic Fabric Strength Tester,Tensile Tester---UTM

20170530

digital speed, error ≤ ± 2% 5.Instruments stroke: 600 mm 6.Elongation Resolution: 0.01 mm 7.Sample holder: manual clamping, pneumatic clamping 8.Power supply: AC 220V ± 10% 50Hz

Tensile Tester

20120619

Power supply: AC220V±10% 2A 50HZ 2. Measuring range: 4 options: 0～30N /0～100N/0～300N/0～500N 3. Tensile velocity: 1.0～400.0 mm/min (Can be adjusted digitally) 4. Interval of clamping

Vibration Meter VM-6360 for Sale

20230731

digits Operating Conditions Temperature 0~50ºC Humidity <90%RH Power Supply 4x1.5V AAA(UM-4)Battery Dimensions 124x62x30mm Weight 120g(Not Including Batteries) Standard Accessories Main Unit Piezoel