EC21 Product Catalogs - 300 300mm

Digital Protractor 360 Degree with Length Scale 300mm/11 Inch

20230221

Sisco 2-in-1 digital protractor can not only measure angles, but also measure lengths as a ruler. Angle measurement range is 0-360 degrees, length measurement range is 0~300 mm/11 inches. Sisco digit

FLIR T840 Thermal Imaging Camera

20250226

mm (5.5 x 7.9 x 3.3 in)CONNECTIONS & COMMUNICATIONSCommunication Interfaces: USB 2.0, Bluetooth, Wi-FiStorage Media: Removable SD cardVideo Out: DisplayPort over USB Type-CMETERLiNK: YesENVIRONMENTAL

Hall Effect Thickness Gauge(Magnetic Bottle Thickness Gauge)

20241127

The “CanNeed-MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as pla

High-Force Shaker System (Water-Cooled)

20240809

of 300kg to 15,000kgDisplacement peak-to-peak: 51 mm,76mm or 100mm.JOEO water-cooled high-force shaker system complies with NASA-STD-7001, NASA-STD-7002B, RTCA/DO-160，MIL-STD-810, ASTM D999 ect.

Sell Electronic Tensile and Compression Testing Machine

20240803

300 Max. test force 300 kN accuracy class 0.5class measurement range of force value 2%-100% FS test force accuracy ±1% displacement measurement micrometer gauge speed of test 0.01-500 mm/min effecti

Multi Channel Ultrasonic Flaw Detector

20240723

mm in steel Material Velocity 100 to 20000 m/s adjustable Display Delay -20 - 3400 µs Probe Delay / Zero Offset 0 - 99.99 µs Gain 110 dB max in selectable resolution 0.1 dB, 1.0 dB, 2.0 dB and 6.0

NDJ-8T Lab Digital Rotating Viscosity Meter Viscosimeter

20240705

300 × 300 × 450(mm) Main feature: 1.ARM technology, built-in Linux system. The operation interface is simple and clear, and the viscosity test is performed quickly and conveniently through the cr

Plastic Test Device Small Single Screw Extruder with Casting Unit

20240628

mm L/D：28 Screw speed: 0-120rpm Mold head width: 250mm Mold opening range: 0-0.8mm Roll surface width: 300mm Linear speed: 0-10m/min Width of casting roller surface: 300mm Casting roller surface di

Thermal Shock Test Chamber

20240624

300*450*350 mm 500*600*400 mm 600*700*450 mm External dimensions (D*W*H) 2250*1300*1950 mm (approximately) 2750*1200*2000 mm (approximately) 2350*1640*2640 mm (approximately) High temperature area Te

ST-8601 Series Conductor Elongation Tester

20240614

sample: ST-8601S ST-8601M ST-8601L Ø0.08-0.8mm Ø0.08~1.6mm Ø0.08~3.2mm Elongation speed: 250~300mm/min Length of test specimen: 250mm Elongation range: 0~60% Displayer: LCD digital displayer.

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage

20240603

±30％ @ 4kV 6.0A ±30％ @ 6kV 8.0A ±30％ @ 8kV Environment: Temperature:15°C－35 °C ;Humidity:10%－75% Power supply: AC220±10％，50/60Hz, 300W Dimension: 260mm(W)×170mm (H)×360mm(D)

Large Size CNC CMM Measuring Machine Fotuna Series XYZ 203015

20240530

mm) Max Load. (kg) Machine size (mm) Machine Weight (kg) Resolution MPEP (μm) MPEE (μm) Scanning probing error X Y Z Lx Ly Lz (μm) TP20 TP200 SP25/SP80 TP20 TP200 SP25/SP80 1 FOTUMA 121510 120

GS-SW3201730300-C1-CL Cooled SWIR Camera

20240530

300-C1-CL Detector type InGaAs FPA Spectral range 0.9μm ~ 1.7μm Resolution 320×256 Pixel size 30μm Active area 9.6mm x 7.68mm Quantum efficiency >70%@（1.0μm-1.6μm） Pixel o perability

Directional Portable X Ray Flaw Detector NDT Machine

20240422

mm) XXQ-1605 80-160 1.5 0.8×0.8 40+5° 19 15 225×225×585 XXQ-2005 100-200 2.0 1.5×1.5 40+5° 30 23 285×285×665 XXQ-2505 150-250 2.5 2.0×2.0 40+5° 40 35 320×320×730 XXQ-3005 170-300 3.0 2.3

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

3000STT25T1,STT25H1 Micro Motion 20002000 IS970197129739Moore Products 3441 Rosemount115120883001C3051, 3051S3044C64431443244, 3144P SiemensSITRANS P DSSITRANS P ES SMARLD301TT3011 ViatranI/A Pressur

KRD70 Hydraulic Vibration Shaker Vibration Table Sine Test Random Test Machine for Earthquake

20240402

300 0～200 0～150 Max. Load (kg) 100 200 400 600 800 1000 1500 3500 5000 7000 8000 Table Size (mm) 600×600 800×800 1000×1000 1200×1200 1500×1500 1800×1800 2000×2000 2500×2500 3000×3000 Max

Heat Seal Tester ASTM F2029 Plastic Film Heat Seal Data Testing Instrument for Sale

20240325

Sealing Temp. Ambient~300℃ Deviation ±0.2℃ Sealing Time 0.1S~9999S Sealing Pressure 0.15~0.7 MPa Seal Jaws 330*10 mm L*W Gas Pressure 0.7 MPa Port Size Ф6 mm PU Hose Power AC 220V 50Hz

Programmable Hast Accelerated Aging Tester for Industry

20230727

mm)300×250350×450450×550550×650650×750External Dimension Φ×D (mm)850×1300×900900×1350×9001000×1480×10001150×1650×12001300×1800×1350Steam Temperature Range Steam Temperature Range: 10

Multi-channel Multi-function Intelligent Temperature and Humidity Itinerant Detector

20221209

Products DescriptionDTZ-300BW wireless intelligent itinerant detector is a multi-function inspection unit with 24 units 24-bit high-precision sampling channels, each channel can be independently conf

Flir E95-24 Advanced Thermal Imaging Camera

20220526

SpecificationsFeature by CameraFLIR E95 - 24° LensIR Resolution464 x 438 (161,472 pixels)Object Temperature Range-20°C to 120°C0°C to 650°COptional 300°C to 1500°CTime-lapse (Infrared)10 Sec t

Active Piston Prover

20240301

mm Active Piston Prover Model Effective VolumeFlow Range Class Of Accuracy Working Pressure HQD-0.02 0.02L （0.1~25）mL/min ≤0.05%，≤0.1%（0-100）kPa HQD-0.1 0.1L （0.4~100）mL/min ≤0.05

New Olympus BondMaster 600 Multimode Bond Tester

20230604

mm × 167 mm × 70 mm (9.3 in. × 6.57 in. × 2.76 in.) Weight1.70 kg (3.75 lb), including lithium-ion battery Standards or DirectivesMil Standard 810G, CE, WEEE, FCC (USA), IC (Canada), RoHS (China)

300W Xenon Light Source System Photocatalysis Photocatalytic Xenon Lamp CEL-PF300-T8

20230614

300nm ~ 2500nm CEL-PF300-T8 (ozone free); 200nm ~ 2500nm CEL-PUV300-T8 (ozone); 5.Working Light diameter: <60mm; 6. Bulb Life（Hours）: > 1000H; 7.Temperature control system: the light box adopts d

LT-JJ03-B Office Chair Repeated Impact Test Machine

20210410

mm Technical parameters 1. Maximum impact height: 250mm 2. Impact frequency: 5-15 times/min 3. Sample limit: length 1000× width 1000× seat height (300 ~ 650mm) 4. Impact weight: 125 ~ 500Ibs(pre

High Purity Gas Generator, Hydrogen Generator, Nitrogen Generator

20240307

300 0-500 Output pressure (MPa) 0.4 (factory set at 0.3) adjustable Working power supply 110/220V ± 10%; 50/60Hz ± 5% Maximum power (W) 200 Environmental conditions and temperature: 10-40 ℃; Rela

Falling Dart Impact Tester

20231016

300~2000g Dart Diameter Method A: 38±1mm Method B: 50±1mm Impact Height 660mm/1500mm Accuracy 0.1g (0.1J) Clamp Pneumatic Clamp Gas Supply 0.6 MPa Φ8 mm PU Tubing Specimen Size > 150 mm x 150 mm P

EN60350-2 Figure Z1 Vessels for Cookware with CNAS Calibration Certificate

20210805

mm±0.05mm, the bottom of the vessel is made of 1.4016 stainless steel with thickness 6mm±0.05mm, the cookware is cylindrical without handle or protrusions. And the lid is made of aluminum, and thic

JB-300 150J / 300J Manual Pendulum Charpy Impact Tester

20230529

300 Reading Of Dia : 0-150J (1J/Grid); 0-300J(2J/Grid) Impact Energy : 150J, 300J Impact Speed 5.2 m/s Pre-rising Angle Of The Pendulum: 135° Specimen Bearer Span: 40+0.2mm Round Angle Of The Jaw :

Manifold Filtration Device

20230721

mm and 50mm membrane. - Filter head accept flame fast sterilization. - Special Taking membrane groove, easy to take off membrane. - Filtration support can be moist heat sterilization. Technical Param

NDW-500 Computer Controlled Torsion Testing Machine

20120515

Function: 1) This series torsion testing machine is composed of loading syste, transmission system, STC300 digital data acquisition and processing system and measurement, display and control system,

ACP Electrical Current Transformer Test, CT/PT Analyzer

20210224

30000 1~5000 error<0.2% 5000~30000 error<0.5% 18 Saved data groups >1000groups 19 Work condition Temperature: -10℃-50℃, moist: ≤90% 20 Size 485mm*356mm*183mm 21 Weight <15Kg Please contact ASS

ST3007 Digital Measuring Projector

20180729

ST3007 DIGITAL MEASURING PROJECTOR (Reverse image) Technical Parameters: Worktable Metal dimension (mm) : 260×152mm Glass dimension (mm): 125*100mm X-axis travel: 75mm Y-axis travel: 50mm Z-axi

1000kn Computer Servo Steel Hydraulic Universal Testing Machine

20211029

300KN 2. Number of columns: four column 3. Measuring range: 2%~100%FS(full range) 4.Accuracy class:1 class 5.Relative Error of Indicating Value: ≤± 1% 6.Test Force Resolution:0.01KN 7.Deformation

Ripple Ceramic X-ray Tube

20140520

current(mA) Focal spot (mm) Filament voltage(V) Filament current ï¼Aï¼ XT-200 200 5 2×2 7 4 XT-250 250 5 2×2 7 4 XT-300 300 5 2.5×2.5 7 4

STZJY-6 Digital Electric Strain Direct Shear Apparatus

20150509

300, 400(Kpa) 6. Max. horizontal loading:1.2KN 7. Variable speed, 0.01 to 2.99mm/minute 8. AC220VAC/60HZ 9. Packing measurement:1000x680x1300mm, weight: 215kg Features: 1. Microprocessor contro

Dyeing Rubbing Tester JIS Standard

20170530

300 g 4.Friction hammer size: 45 * 50 mm 5.Specimen: 22 * 3 cm 6.White cotton: 5 * 5 cm 7.Machine weight: about 60 kg 8.White cotton friction area: about 1 cm2 9.Friction distance: 100 mm 10.C

300kN UTM / TTM / Tensile Test Equipment / Tensile Testing Machine Price (WEW-300B)

20190815

300kN Indicating value precision of test force ±1% Measurement precision of deformation ±1% Test force value relative error Better than the shown ±1% Max. Tensile space 550mm Max. compression spa

UTM / TTM / Tensile Testing Machine / Lab Test Equipment 300kN

20190821

300KN 2. measuring range: 4%-100%; 3. the testing power accuracy: ± 1% 4. the maximum distance of tensile space: 550mm 5. the round specimen clamp diameter: φ10-32 6. the thickness of flat specimen

SOBEKK E300 Manual Video Measuring Machine

20210222

300 E400 E500 / S300 Z axis auto S400 Z axis auto S500 Z axis auto EP200 3D probe EP300 3D probe EP400 3D probe EP500 3D probe Measuring range(mm) 200*100*200 300*200*200 400*300*200 500*400*200 Mach

Burst Tester

20120619

300~6000kPa 3. Compression rate: 170±15ml/min 4. Resolution: 0.1kPa 5. Accuracy: ≧99.5 % 6. Diaphragm size: bulge height: 2.5±0.2mm bulge diameter: 27.8mm 7. Diaphragm resistance: whe

Torque Meter Tester Testing Measuring Machine 0.15~500kg

20221112

300 times Charger Input:AC110~240V,50/60Hz output:DC7.25V,120mA Joint terminal size 12 angles or 20 mm² Dimension 230*120*60mm Weight 2.0kg Note Can`t be used to test the continuous impact type semi

Ponovo POM2-6143 Universal Protection Relay Test System for Protective Relays

20230609

300V, the POM2‐3243 with 3×20A and 4×300V.POM2 universal test system could be used for testing all kinds of relays. Its localcontrol system is with 10.4inch LCD screen based on Windows system.POM

Mattress Tester Machine

20180821

mm 7. Impact height: 0-300mm adjustable 8. Counter range: 0-99999 times 9. Power: 380V ,2KW DC pressure range 0-300KG maximum force 1025N minimum force 22N Pusher travel speed adjustable 160 w

Refractometer RA-620 / RA-600

20140212

300 data Calibration Record 20 data Check Record 20 data External Storage USB Flash Drive Temp. Compensation Brix 5.00 ~ 75.00°C (Automatic compensation by preprogrammed conversion table.) Concen

Fluxmeters Electromagnetic Flux Meter Price Magnetic Flux Flow Density Meter

20230522

to 3mwb range); 7. Volume: 285mm × 300mm × 100mm, weight: 3kg; (width * depth * height); 8. Operating environment: -45 ℃ -38 ℃; humidity: <85%; environmental sea wave: <3500 meters.

Ultrasonic Thickness Meter TM-8812 for Sale

20230523

mm High Temperature Probe: Measuring range (steel): 1.0~225.0 mm (normal temperature) Measuring range (steel): 4.0~100.0 mm (high temperature) Operating temperature: -10~300°C 3. Curved Surface Prob

HSL-6001 Heat Seal Tester

20210625

300℃ Accuracy: ±0.2 ℃ Dell time: 0.1~ 999.9s Pressure: 0.05 MPa~1.1MPa Heat jaw surface: 265mm × 12 mm (customized) Heat jaws: 2, controlled independently Gas source pressure: 0.05MPa ~ 1.1MPa

HZC-3980 High Voltage CB Tester Circuit Breaker Dynamic Characteristics Analyzer

20210426

breaker: range-600.0mm, resolution-1mm, error-1%±1d Current Range: 20.00A, resolution: 0.01A Output power DC30~250V digitally adjustable /20A (Instantaneous) Dimension 360×280×300mm3 Weight 9kg

Coefficient of Friction COF Tester Testing Equipment

20180626

300mm/min Sled Size: 63mm x 63mm Heated Plane: 150mm x 300mm (option to operate COF testing at ambient or heated temperature) Travel Distance: 220mm Communication: USB Cutting Templates Included: 1 x

XEX Series Electronic Universal Testing Machine

20231013

300E Max. load (kN) 0.05/0.1/0.2 /0.5/1/2/5 5/10/20 50 100 200/300 Control method / Isokinetic stress, isokinetic strain, isokinetic displacement, closed loop control Load accuracy Class 1, class 0.5