EC21 Product Catalogs - 300mm

Digital Protractor 360 Degree with Length Scale 300mm/11 Inch

20230221

Sisco 2-in-1 digital protractor can not only measure angles, but also measure lengths as a ruler. Angle measurement range is 0-360 degrees, length measurement range is 0~300 mm/11 inches. Sisco digit

FLIR T840 Thermal Imaging Camera

20250226

mm (5.5 x 7.9 x 3.3 in)CONNECTIONS & COMMUNICATIONSCommunication Interfaces: USB 2.0, Bluetooth, Wi-FiStorage Media: Removable SD cardVideo Out: DisplayPort over USB Type-CMETERLiNK: YesENVIRONMENTAL

Hall Effect Thickness Gauge(Magnetic Bottle Thickness Gauge)

20241127

The “CanNeed-MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as pla

High-Force Shaker System (Water-Cooled)

20240809

of 300kg to 15,000kgDisplacement peak-to-peak: 51 mm,76mm or 100mm.JOEO water-cooled high-force shaker system complies with NASA-STD-7001, NASA-STD-7002B, RTCA/DO-160，MIL-STD-810, ASTM D999 ect.

Sell Electronic Tensile and Compression Testing Machine

20240803

300 Max. test force 300 kN accuracy class 0.5class measurement range of force value 2%-100% FS test force accuracy ±1% displacement measurement micrometer gauge speed of test 0.01-500 mm/min effecti

Multi Channel Ultrasonic Flaw Detector

20240723

mm in steel Material Velocity 100 to 20000 m/s adjustable Display Delay -20 - 3400 µs Probe Delay / Zero Offset 0 - 99.99 µs Gain 110 dB max in selectable resolution 0.1 dB, 1.0 dB, 2.0 dB and 6.0

NDJ-1C Hot Melt Adhesives Brookfield Viscosity Meter

20240705

300 × 300 × 450mm Main feature 1. Measurement data is displayed directly on the LCD screen without secondary calculation. 2. Adopting microcomputer drive technology and imported stepping motor, the

Plastic Test Device Small Single Screw Extruder with Casting Unit

20240628

mm L/D：28 Screw speed: 0-120rpm Mold head width: 250mm Mold opening range: 0-0.8mm Roll surface width: 300mm Linear speed: 0-10m/min Width of casting roller surface: 300mm Casting roller surface di

Thermal Shock Test Chamber

20240624

300*450*350 mm 500*600*400 mm 600*700*450 mm External dimensions (D*W*H) 2250*1300*1950 mm (approximately) 2750*1200*2000 mm (approximately) 2350*1640*2640 mm (approximately) High temperature area Te

ST-8601 Series Conductor Elongation Tester

20240614

sample: ST-8601S ST-8601M ST-8601L Ø0.08-0.8mm Ø0.08~1.6mm Ø0.08~3.2mm Elongation speed: 250~300mm/min Length of test specimen: 250mm Elongation range: 0~60% Displayer: LCD digital displayer.

IEC61000-4-2 Electrostatic Discharge Generator with 20KV Output Voltage

20240603

±30％ @ 4kV 6.0A ±30％ @ 6kV 8.0A ±30％ @ 8kV Environment: Temperature:15°C－35 °C ;Humidity:10%－75% Power supply: AC220±10％，50/60Hz, 300W Dimension: 260mm(W)×170mm (H)×360mm(D)

Large Size CNC CMM Measuring Machine Fotuna Series XYZ 203015

20240530

mm) Max Load. (kg) Machine size (mm) Machine Weight (kg) Resolution MPEP (μm) MPEE (μm) Scanning probing error X Y Z Lx Ly Lz (μm) TP20 TP200 SP25/SP80 TP20 TP200 SP25/SP80 1 FOTUMA 121510 120

GS-SW640171550-C1-CL Cooled SWIR Camera

20240530

input 12V DC Power consumption ＜5W TEC off Operation temperature -40℃ ~ +55℃ Storage temperature -50℃ ~ +65℃ Weight ≤300g（no lens） Dimensions ≤60mm x 60mm x 63mm

Directional Portable X Ray Flaw Detector NDT Machine

20240422

mm) XXQ-1605 80-160 1.5 0.8×0.8 40+5° 19 15 225×225×585 XXQ-2005 100-200 2.0 1.5×1.5 40+5° 30 23 285×285×665 XXQ-2505 150-250 2.5 2.0×2.0 40+5° 40 35 320×320×730 XXQ-3005 170-300 3.0 2.3

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

3000STT25T1,STT25H1 Micro Motion 20002000 IS970197129739Moore Products 3441 Rosemount115120883001C3051, 3051S3044C64431443244, 3144P SiemensSITRANS P DSSITRANS P ES SMARLD301TT3011 ViatranI/A Pressur

KRD61 6-DOF Motion Simulator Test System Simulation Table

20240402

300 KRD 61-500 KRD 61-1000 KRD 61-2000 KRD 61-5000 KRD 61-10T Max. Load (kg) 100 300 500 1000 2000 5000 10000 Height of Specimen COG (mm) 500-1000 (customized by product) Table Dimension (mm) Customi

ASTM F1140 Package Burst Tester Leak and Seal Strength Testing Instruments ASTM F2054

20240325

adherence to rigorous quality benchmarks. Main Parameters Test Range 0~600KPa Sample Width 300mm (standard) Inflating Head Φ4mm Compressed Air 0.4~0.7MPa (Prepared by user) Power 110~220V 50/60Hz

Programmable Hast Accelerated Aging Tester for Industry

20230727

mm)300×250350×450450×550550×650650×750External Dimension Φ×D (mm)850×1300×900900×1350×9001000×1480×10001150×1650×12001300×1800×1350Steam Temperature Range Steam Temperature Range: 10

Multi-channel Multi-function Intelligent Temperature and Humidity Itinerant Detector

20221209

Products DescriptionDTZ-300BW wireless intelligent itinerant detector is a multi-function inspection unit with 24 units 24-bit high-precision sampling channels, each channel can be independently conf

XEX Series Electronic Universal Testing Machine

20231013

300E Max. load (kN) 0.05/0.1/0.2 /0.5/1/2/5 5/10/20 50 100 200/300 Control method / Isokinetic stress, isokinetic strain, isokinetic displacement, closed loop control Load accuracy Class 1, class 0.5

Flir E95-24 Advanced Thermal Imaging Camera

20220526

SpecificationsFeature by CameraFLIR E95 - 24° LensIR Resolution464 x 438 (161,472 pixels)Object Temperature Range-20°C to 120°C0°C to 650°COptional 300°C to 1500°CTime-lapse (Infrared)10 Sec t

Olympus Omniscan SX 16:64 Flaw Detector

20230728

mm × 94 mm (10.5 in. × 8.2 in. × 3.7 in.)Weight: 3.4 kg (7.5 lb) with battery Data StorageStorage devices: SDHC card or most standard USB storage devicesData file size: 300 MB I/O LinesEncoder: 2-

Active Piston Prover

20240301

mm Active Piston Prover Model Effective VolumeFlow Range Class Of Accuracy Working Pressure HQD-0.02 0.02L （0.1~25）mL/min ≤0.05%，≤0.1%（0-100）kPa HQD-0.1 0.1L （0.4~100）mL/min ≤0.05

EnviClone IEC 61215 From IPX1 Through IPX6 Combined Water Rain Drip Spray Flush Test Chamber

20240113

300mm (adjustable). RPM 1~3/min, adjustableRotary Table1~3r/min, can be set in the controlling system.Illumination LampWith long lifetimeWater RequiredPurified and softened running water.Structure &

New Olympus BondMaster 600 Multimode Bond Tester

20230604

mm × 167 mm × 70 mm (9.3 in. × 6.57 in. × 2.76 in.) Weight1.70 kg (3.75 lb), including lithium-ion battery Standards or DirectivesMil Standard 810G, CE, WEEE, FCC (USA), IC (Canada), RoHS (China)

MOSIP Certified Fingerprint Scanner

20240131

mm x 20.32mm Image Size 300*400 pixel FAP (fingerprint acquisition profile) FAP20 Security FTM based, MOSIP L1 Device, SBI 2.0 Compliance FBI-PIV, MOSIP L1, CE & FCC certified Maximum Acquisition tim

High Purity Gas Generator, Hydrogen Generator, Nitrogen Generator

20240307

300 0-500 Output pressure (MPa) 0.4 (factory set at 0.3) adjustable Working power supply 110/220V ± 10%; 50/60Hz ± 5% Maximum power (W) 200 Environmental conditions and temperature: 10-40 ℃; Rela

JB-300 150J / 300J Manual Pendulum Charpy Impact Tester

20230529

300 Reading Of Dia : 0-150J (1J/Grid); 0-300J(2J/Grid) Impact Energy : 150J, 300J Impact Speed 5.2 m/s Pre-rising Angle Of The Pendulum: 135° Specimen Bearer Span: 40+0.2mm Round Angle Of The Jaw :

Solar Simulator Xenon Lamp Light Source Solar Cell IV Test

20240104

300-2500nm Light intensity(mw/cm2) 10-500 Power Stability ±0.01% Light source stability <±0.5% Parallel light spot diameter 50-60mm Spot light output diameter 2-3mm Zoom function Can change the lig

Low Price Office Chair Backrest Durability Life Testing Machine

20210423

Technical parameters A. handrail strength test technical parameters:1. Cylinder travel: 0 ~ 600mm 2. Electric range: 0 ~ 600mm3. Application load: 50Lb ~ 300Lb or as specified 4. Sensor: 200kg5. Test

Falling Dart Impact Tester

20231016

300~2000g Dart Diameter Method A: 38±1mm Method B: 50±1mm Impact Height 660mm/1500mm Accuracy 0.1g (0.1J) Clamp Pneumatic Clamp Gas Supply 0.6 MPa Φ8 mm PU Tubing Specimen Size > 150 mm x 150 mm P

IEC61000-4-5 Lightning Surge Generator

20210729

300V，10A（16AMax），50/60Hz DC：300V，10A（16AMax） EUT power supply AC110-220V±10％，50/60Hz Coupling mode L-N,L-PE，N-PE，L+N-PE Working environment Temperature:15°C－35°C humidity

Manifold Filtration Device

20230721

mm and 50mm membrane. - Filter head accept flame fast sterilization. - Special Taking membrane groove, easy to take off membrane. - Filtration support can be moist heat sterilization. Technical Param

300J Metal Material Automatic Charpy Pendulum VU-notch Used Izod Laboratory Impact Tester

20190815

300J/150J 2. Angel of the Pendulum raise in advance: 150. 3. The distance from the center of hammer to impact point: 750mm, 4. Impact speed: 5.2m / s 5. The span of sample branch seat : 40mm 6. The r

300J Metal Material Automatic Charpy Pendulum VU-notch Used Izod Laboratory Usage Impact Tester

20190821

300J/150J 2. Angel of the Pendulum raise in advance: 150. 3. The distance from the center of hammer to impact point: 750mm, 4. Impact speed: 5.2m / s 5. The span of sample branch seat : 40mm 6. The r

SOBEKK S600 Semi-Automatic Video Measuring Machine

20190123

mm) 500*400*200 600*500*200 800*600*200 Machine size(mm) 1200*900*1500 1400*1100*1500 1800*1400*1500 Weight（kg） 300 350 400 Max. load（kg） 20 25 25 Accuracy of X-Y axis 3+L/150µm Accurac

Liquid Crystal (SCM) Control Torsion Testing Machine

20120515

300mm 9 Coaxiality error of center line of two collets ≤ÑÂÂ1.0mm, within 1000mm 10 Center height of main shaft 210mm 11 Loading mode Automatically loading 12 Power supply o

ACP Electrical Current Transformer Test, CT/PT Analyzer

20210224

30000 1~5000 error<0.2% 5000~30000 error<0.5% 18 Saved data groups >1000groups 19 Work condition Temperature: -10℃-50℃, moist: ≤90% 20 Size 485mm*356mm*183mm 21 Weight <15Kg Please contact ASS

Torque Meter Tester Testing Measuring Machine 0.15~500kg

20221112

300 times Charger Input:AC110~240V,50/60Hz output:DC7.25V,120mA Joint terminal size 12 angles or 20 mm² Dimension 230*120*60mm Weight 2.0kg Note Can`t be used to test the continuous impact type semi

Mattress Tester Machine

20180821

mm 7. Impact height: 0-300mm adjustable 8. Counter range: 0-99999 times 9. Power: 380V ,2KW DC pressure range 0-300KG maximum force 1025N minimum force 22N Pusher travel speed adjustable 160 w

ST3007 Digital Measuring Projector

20180729

ST3007 DIGITAL MEASURING PROJECTOR (Reverse image) Technical Parameters: Worktable Metal dimension (mm) : 260×152mm Glass dimension (mm): 125*100mm X-axis travel: 75mm Y-axis travel: 50mm Z-axi

1000kn Computer Servo Steel Hydraulic Universal Testing Machine

20211029

300KN 2. Number of columns: four column 3. Measuring range: 2%~100%FS(full range) 4.Accuracy class:1 class 5.Relative Error of Indicating Value: ≤± 1% 6.Test Force Resolution:0.01KN 7.Deformation

Ripple Ceramic X-ray Tube

20140520

current(mA) Focal spot (mm) Filament voltage(V) Filament current ï¼Aï¼ XT-200 200 5 2×2 7 4 XT-250 250 5 2×2 7 4 XT-300 300 5 2.5×2.5 7 4

STDJ-3 Automatic Compactor

20150509

mm dia, adjustable to 2. 5 kg and 4.5 kg weight. 2. Drop: Adjustable to 300 mm and 450 mm 3. Motor:370W, 1400rotate/min. 4. Dimensions 380×640×1350 mm 5. Package weight: 260 kg Featu

Dyeing Rubbing Tester JIS Standard

20170530

300 g 4.Friction hammer size: 45 * 50 mm 5.Specimen: 22 * 3 cm 6.White cotton: 5 * 5 cm 7.Machine weight: about 60 kg 8.White cotton friction area: about 1 cm2 9.Friction distance: 100 mm 10.C

Tensile Tester Free Falling Dart Impact Tester Impacting Test

20220301

300~2000gResult accuracy 0.1g ( 0.1J )Sample clamp Pneumatic.Dart release ElectromagnetismGas source 0.5MPa~1.0MPa (self-provide)Sample size not less 150mm×150mmUnit dimension Method AMethod B 450mm

HZC-3980 High Voltage CB Tester Circuit Breaker Dynamic Characteristics Analyzer

20210426

breaker: range-600.0mm, resolution-1mm, error-1%±1d Current Range: 20.00A, resolution: 0.01A Output power DC30~250V digitally adjustable /20A (Instantaneous) Dimension 360×280×300mm3 Weight 9kg

Crease Bend Tester

20180628

300mm Digital display Accuracy 1% FS Pneumatic sample clamp Motorised Load Bar Adjustable folding distance Peak Memory function Easy to operate Quick and simple testing Benefits: Easy to use

Tensile Tester

20120619

300N/0～500N 3. Tensile velocity: 1.0～400.0 mm/min (Can be adjusted digitally) 4. Interval of clamping heads: 20～350 mm(Can be set digitally) 5. Minimum distinguishhability: 0.1N (When 0~30N, th

Ponovo PW466i Protective Relay Testing Equipment 6-Phase Protective Relay Test Set

20230609

300V Binary input Number 8 Type 0-400Vdc threshold or potential free Binary output 4 Recording & monitoring Internal In-built External optional IEC61850 GOOSE optional Dimension 360*157*367mm Weight