EC21 Product Catalogs - 4 setting

Medical Insulation Detector

20250226

48 hours; ★Connecting end: multi-specification, can connect different diameter electrical port of the instrument; ★Operation setting: Pre-set 6 commonly used voltage measurement modes to meet the

Fluke TI480 PRO Thermal Imaging Camera

20250226

Specification Features IFOV with standard lens (spatial resolution): 0.93 mRad, D:S 1065:1Detector resolution: 640 x 480SuperResolution: Captures and combines 4x the data to create a 1280 x 960 (614,

Fluke 393-IRR-PVLEAD Solar Kit with True RMS Solar Clamp Meter, Irradiance Meter and MC4 Test Leads

20250220

Included with the Fluke 393-IRR-PVLEAD True RMS Clamp Meter Solar Irradiance Meter Test Leads, Right Angle Plugs with Safety Caps Flexible Current Probe MC4 Test Lead Set MC4 Solar Clamp Test Lead Se

Fluke TIX580 Infrared Camera

20250109

Features: TiX580 60Hz Industrial Thermal CameraStunning 640 x 480 image quality (320 x 240 resolution is available on the TiX560, TiX520, and TiX500 models)SuperResolution Mode turns your 640 x 480 i

WDLYCH/WDLHCN CCS Marine Analog Panel Current Meter/Ammeter for Switchboards

20241227

set and control engineering. It is high end meter, and suitbale for complicated environment to measure electric/non-electric energy. Technical parameters: Product Name Customized 0-100A Marine analog

Automatic Digital Enamel Rater for Cans

20241225

4) Fully self-checking to ensure that the results from each test can be relied upon, calibration time can be customized. 5) Automatic monitoring, alarm itself if tested value beyond a set range. 6)

YH800C Portable Fully Automatic Pressure Calibrator

20241225

4. Portability: The device is designed to be lightweight, easy to carry, and suitable for use in various industrial sites, especially in situations with limited space or complex environments.5. Instr

Self Leveling Laser Level

20241206

4. Using a construction laser level to work efficiently and quickly. By using a laser level, workers can easily determine the elevation of a surface, set grades, and ensure building elements are pr

Heat Alarm & Detector Test Tunnel

20241122

4-5HC 2) Power supply：380VAC power：20 kW 3) Test standards： BS 5446-2, EN 54-5, GB 4716 4) Temperature control：PID setting value +/-2℃ 5) Temperature rise rate：0.2° C/min、 1°C/min

Dissolved Ozone Meter Intelligent Online Water Ozone Analyzer Tester Sanitizer Ozone

20240929

4~20mA ◇Relaythe relay lag value can be set freely. Relay load :3A 220VAC/24VDC.◇Working conditionsenvironmental temperature of 0~60℃, relative humidity ≤90%◇Output load:<750Ω(4-20mA)◇Wo

Steel Bar/Steel Tube/Steel Pipe/Rebar Bending Testing Machine

20240803

4, paragraph 4, 5, 6 for production and test, and its main technical parameters in line with the standard requirements of GB5029 -85. it is the essential testing equipment for the steel and building

Ultrasonic Flaw Detector

20240723

setting and alarm indication; ● Gate and DAC alarm; Specification Measuring Range (mm) 0 - 6000 Channels 500 Frequency Range (MHz) 0.5 - 10 Material Velocity (m/s) 1000 - 16000 Vertical Linearity E

NDJ-8T Lab Digital Rotating Viscosity Meter Viscosimeter

20240705

4# (standard); 0# rotor (optional) Measurement error (Newtonian liquid) ±0.5% Repeat error (Newtonian liquid) ±0.25% Timing function Yes Temperature measurement function Standard temperature probe

Fully Automatic Online Surface Defect Detection Equipment BQJ-D4100

20240703

4 mm At 100m/s: 2mm Minimum lateral defect (mm): 0.045 Minimum depth defect (mm): 0.25 The standard configuration of the entire set of equipment: image acquisition vehicle, terminal control cabinet,

Sand and Dust Test Chamber

20240619

setting, blowing dust time can be set, cycle period can be adjusted, time can be adjusted. Safety device Over-temperature protection, grounding protection, etc. Power supply AC 220V/380V±10%, 50 Hz

ST-6609 Abrupt Force Test Machine

20240614

6 workstations Abrupt pull height: 7inch or 10inch (Optional) Weight of abrupt pull: 6pcs of 25Lb Counter: 1~9999 continually counting and setting, when up to set value will stop automatically

F105/F305/F505/F505H Advanced Test Stand Frame

20240530

set the test limits or testing exception. Dual-graduated rulers’ aid with switch placement. 4. Perfect force sensor interface Series FS05 force sensors mount the crosshead of model F105, F305, F505

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage

20240528

IEC61000-4-5 Lightning Surge Generator with 15KV Output Voltage 1. Introduction The LSG-1520 Surge Generator is a auto equipment designed according to IEC61000-4-5 and GB/T17626.5,and completely meet

EKL 4 Cable Fault Locator for Power Distribution Network

20240520

EKL 4 Short Circuit and Ground Fault Indicator This series of products can be widely used in power system, all kinds of ring network cabinet, high voltage switch cabinet and cable branch box, can acc

Smart Supervisor IIOT Gateway

20240504

4G,WiFi & EthernetHigh Uptime of 99.8% - Edge Computing : On board data processing based on rules & logic set by you. Minimizes cloud cost. - High Speed Data Acquisition : High Speed data acquisition

High Voltage Wire Harnesses/Cables Testing Bench Top(Table) for Automotive

20240412

4. With administrator and operator double password , effectively ensure the control and security of the test program; 5. Synchronous recording of test data helps customers promptly understand prod

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

4 supports the commands contained in HART protocol Version 5.7. With 2 MB of memory, the 754 supports a substantial set of HART instructions: Universal commands provide functions that are implemented

KRD20 Factory Direct Sell Bump Test Machine for Mechanical Impact Testing

20240402

set arbitrarily, and it will stop automatically after the test is completed Technical Specifications Model Parameters KRD 20－50 KRD 20－100 KRD 20－200 KRD 20－500 KRD 20－800 KRD 20－1000 KRD

Hot Tack Tester ASTM F2029 Hot Seal Strength Testing Instrument Plastic Packaging Hot Tack Strength

20240325

set temp and keeps stable 7 inch TFT touching screen for easy operation PLC control Aluminum encapsulated sealing jaws for average heating Multi-group parameter saving Any testing speed adjustable Au

TTR-I Fully Automatic Three Phase Power Transformer Turns Ratio Test Set

20220314

TTR-I Fully Automatic Three Phase Power Transformer Turns Ratio Test Set Introduction: TTR-I Transformer Turns Ratio Tester is designed according IEC76-1 and IEC60044. It can be applied to test the t

Fully Automatic Insertion and Extraction Force Tester

20231012

4. Connector single pin and plastic retention test; 5. Connector NORMAL FORCE test; 6. General compression and tensile failure test; Instrument features: 1. The test conditions can be set and stored

Programmable Hast Accelerated Aging Tester for Industry

20230727

4387155250PowderAC220V, 1∮ 3 Lines ,50/60HZ; AC380V ,3∮ 5 Lines,50/60HZ Performance: 1. Temp.Range: ( RT+10ºC ) ~ 135ºC Free setting (saturated steam temperature). 2. Humidity Range : 100%RH (d

Multi-channel Multi-function Intelligent Temperature and Humidity Itinerant Detector

20221209

Products DescriptionDTZ-300BW wireless intelligent itinerant detector is a multi-function inspection unit with 24 units 24-bit high-precision sampling channels, each channel can be independently conf

Leak Tester

20231101

set vacuum. If a minor leak exists, the pressure difference expels trapped air, evidenced by bubbles emerging from the leak area. Main Parameters Test Range 0~-90 KPa Chamber Acrylic Cylinder Shape

Intelligent DC Hipot Tester

20240130

4. Automatic raise voltage/hold voltage/drop voltage/discharge 5. Automatic MOA test function 6. Over-voltage and over-current protection 7. Automatic memory with time/date 8. Built-in thermal printe

3kW/3.5kW/4kW/5kW/6kW/7kW AC/DC Load Bank for Data Center Load Test

20230615

3kW/3.5kW/4kW/5kW/6kW/7kW AC/DC Load Bank for Data Center Load Test 3-12kw AC220/240V Rack Mounted Load Bank for Data Center TestMAIN FUNCTION AND FEATURES 1: Perfect simulation of server power usage

Intelligent Temperature Measuring Machine

20230417

4, RS232language settingsSimplifiedNetwork settingsWired, wireless, 4Gtime settingTime, date, time zone, settings (manual settings and server synchronization)Voice settings0-10 (0 bit mute, the defau

SciAps X-555 Handheld XRF Analyzer

20230815

settings provide optimal performance across the entire periodic table from Mg to U. All in a rugged instrument with state-of-the-art software and outstanding thermal dissipation. In Use Globally SciA

MDKN Gas Meter Endurance Test Bench

20240308

set. The system defaults to 25,000 times, 150,000 times, 300,000 times and 450,000 times.2) The test pressure controlled between 2kPa and 2.5kPa, and the maximum pressure change not exceed ±300Pa.3.

F316 Smart Battery Calibration

20230908

Product DescriptionBuy F316 Smart Battery Calibration which is of high quality directly with low price. Product highlights: 2.4-inch large screen displays calibration battery information; knob button

China MIL-STD-810H Military Standard Dual Blowing Dust Sand Proof Resistance Test Chamber Machine

20240114

4200 x 220045kW2. Specification3. PerformanceTemperature Range23°C~70°CTemperature Deviation≤ ±2°CHumidity＜ 30%R.HAir Velocity1.5 ~ 8.9 m/s (blown dust)18.0 ~ 29.0 m/s (blown sand)Concentrati

ECT Bottle Cap Torque Tester

20240313

Setting 4. Time and Power 5. Torque Value and Unit 6. Statistics: Saved five-point measurements value. 7. Analysis: Average Variance criterion. 8. Prompt First Peak/Double Peak: Drop ratio How to Use

Touch Screen Hot Runner Controller

20231204

4 inch HMI color screen. It is easy to browse, setup and control the hot runner temperature controller systems. Operations can be very simplified and efficient with its modular design and optimized s

ISO 15105-2 Permeable Film Oxygen Transmission Rate Tester GBPI

20220901

set test process. 3)Fully-auto operation, judge and stop automatically. 4)Real time curves display of transmission, oxygen concentration, temperature and humidity, curves can be easily zoomed and mo

Gas Chromatograph Analyzer GC Tester

20230216

set and automatically controlled by the keyboard. There are various over-temperature protection functions, which greatly guarantee the safety of the instrument. The zero-crossing pulse triggers the c

New Olympus BondMaster 600 Multimode Bond Tester

20230604

40 s Low Pass Filter*6 Hz to 300 Hz Probe DriveLOW, MEDIUM, and HIGH user-adjustable settings Variable Persistence*0.1 s to 10 s Variable Display Erase*0.1 s to 60 s Available Alarm Types*3 simultane

High Accuracy 18650/26650/32650/21700 Battery 1-24 Series Bms PCB Testing Machine Bms Tester

20220611

24 Series Bms Testing System Lithium Battery Pack Bms Pcb Tester 18650 Lithium Battery Tester Machine feature : The PBTS series multi-function BMS board testing machine is mainly used to testing th

High Purity Gas Generator, Hydrogen Generator, Nitrogen Generator

20240307

4 (factory set at 0.3) adjustable Working power supply 110/220V ± 10%; 50/60Hz ± 5% Maximum power (W) 200 Environmental conditions and temperature: 10-40 ℃; Relative humidity: ≤ 85%; No large a

Dustproof Testing Machine | Dust Proof Chamber

20231024

423.37-89 (Test L: dust test methods), GB4208, GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB7000.1 9.2.1, 9.2.2 and Figure 6, DIN40050 and IP5K0. The dust test chamber is appli

Automatic Melting Point Tester

20230426

4 samples at a time (3 small and 1 large hole); 3: High automation integration, realize one-key measurement function; 4: Fully automatic recording of melting range, initial melting and final melting;

Eyc DPM02 Multifunction Signal Display Monitor

20220513

4 place, button Display:Highlight red LED(Brightness can be adjusted), digit height 14.1 mm Accuracy:0.1%F.S.±1 digital Parameter setting mode:Button Input Current:0 ... 20 mA / 4 ... 20 mA Voltage:

Photocatalytic Xenon Lamp Light Source Photocatalysis Photocatalytic Visible Light UV Light

20240104

set VisREF (Reflect Visible Light, 350-780nm) UVREF (Reflect UV, 200-400nm) AM1.5G (300-1100nm) UVIRCut400 (Band Pass 400-780nm) UVIRCut420 (Band Pass 420-780nm) CUT800 (Pass Above 800nm) Band Pass F

Computer Servo System Double-Column Tensile Testing Machine

20210423

4. Can do tension, extension, stress, strain, and show the curve, holding pressure, bending5. Maximum stroke: 1000mm(including fixture), left and right span: 410mm(standard machine)6. Protection devi

Single Workbench Type YFT-T2400 Hydraulic Butterfly Valve Test Equipment for Butterfly Valve Test

20230330

4. Test medium are optional including water, air or kerosene. 5. It has low and high pressure water pump and water booster . There is an air connection reserved for air pump. 6. Water and hydraulic o

Falling Dart Impact Tester

20231016

4-1, GB/T 9639.1 echnical Features FDT-01 Falling Dart Impact Tester is a PLC controlled unit (industrial level stable) and HMI touch screen operated. Every part of the dart assembly and releasing