EC21 Product Catalogs - Angle

Fluke RSE600/C 60HZ - Fixed Mount Thermal Imager with Case, HS1 - 640 X 480 Resolution, 60 Hz

20250226

angle, note, pinsReal-time trendPoint trend, area trend, mix trend, profile trend, boxline trendCustomizable reportsDisplay the information you need based on your applicationCenter-point temperature

Medical Insulation Detector

20250226

angle, easy for watching; ★Alarm mode: sound, light, shadow three alarm modes, leakage detection prompt flashing, automatic voice broadcast the results after the completion of detection; ★Battery

Fluke 393-IRR-PVLEAD Solar Kit with True RMS Solar Clamp Meter, Irradiance Meter and MC4 Test Leads

20250220

Included with the Fluke 393-IRR-PVLEAD True RMS Clamp Meter Solar Irradiance Meter Test Leads, Right Angle Plugs with Safety Caps Flexible Current Probe MC4 Test Lead Set MC4 Solar Clamp Test Lead Se

Fluke TI480 PRO 60 Hz, 640 X 480 High-Performance IR Thermal Camera

20250129

angle markers in-camera identify min/max temperatures for areas of equipment or equipment array Distinguish heat differences more easily with new color palette and wider array of yellows and greens i

Fluke TIX580 Infrared Camera

20250109

angle, unlike standard pistol grip camerasErgonomic design and neck strap make long inspection days much easierGet an in-focus image with the touch of a button. LaserSharp® Auto Focus, exclusive to

WDLYCH/WDLHCN CCS Marine Analog Panel Current Meter/Ammeter for Switchboards

20241227

Angle 90/240-270° Temperature -13-33℃, 100% comply with accuracy class Technical Standards GB/T7676-1998 Environment GB8355-1987 Safety Standards GB4793-20 Working Temperature -40℃-65℃ Options

Construction Laser Level

20241206

angle exceeds 3 Self-leveling time:less than 5s Horizontal line and vertical lines can be switched automatically 360°rotating,outdoor and indoor use Can be used with tripod to adjust the level heigh

Exit Device Durability Test Equipment

20241122

angle can be adjusted according to test requirements. If test sample failed, the equipment can stop test door automatically. The equipment includes a touch screen to set, control and display the test

Drop Test Machine

20241113

Drop test machine, drop test bench for product packaging in the simulation of different angles, corners, surfaces at different heights when dropped on the ground, so as to understand the damage to th

YH701 Temperature and Humidity Calibration Device

20241106

angles without dead corners.◆Humidity control system: Humidification is achieved by heating water to produce water vapor. Humidification is done as steam instead of water particles, which is more u

Portable Hardness Tester

20240925

Portable Hardness Tester Features ● Compact plastic case, suitable for use under poor working conditions. Test at any angle, even upside down. ● Wide measuring range. It can measure the hardness

Steel Bar/Steel Tube/Steel Pipe/Rebar Bending Testing Machine

20240803

angle figures is intuitive, smooth running makes low noise, the using life is long and reliable, it is designed to facilitate to repair easy , and so on. Technical parameters: Items Technical speciat

2 Axis 2 Frame POD Multiple Spectral Electro Optic Camera Sensor 4.5kg

20240628

angle Nx360° Elevation Axis working angle -110°~+30° Maximum Angular Velocity ≥60°/S Maximum Angular Acceleration ≥60°/S2 Stability Accuracy ≤100μrad Video Interface Network port Communic

Gear Measuring Machine for Worm Wheel Rotary Table,Bevel Gear,

20240531

angle range 0～90° Distance between top and bottom tips（㎜） 10～500 10～800 10～1000 10～1000 10～1000 10～1000 Vertical measurement range（㎜） 400 400 600 600 800 800 Workp

IEC60695-11-4 UL94 Horizontal and Vertical Flame Test Apparatus

20240524

angle, the fire hazard is evaluated by burning rate, after glow time, after flame time and damage length of the specimen. Horizontal and vertical flame test apparatus is applied to 50W vertical flame

Directional Portable X Ray Flaw Detector NDT Machine

20240422

angle Penetrationion (mm) Generator Weight(kg) Generator Size (mm) XXQ-1605 80-160 1.5 0.8×0.8 40+5° 19 15 225×225×585 XXQ-2005 100-200 2.0 1.5×1.5 40+5° 30 23 285×285×665 XXQ-2505 150-250 2.

Biological Safety Cabinet_PURICUBE NEO

20210713

Angle in front - ② Frame-less window -> Strengthen validation support using higher performance filters - HEPA filter that enables to remove 99.995% of particles that have a size greater than or

Carpet Flammability Tester

20160615

Angled mirror for viewing; 4. Applicable to 2 different tests, enclosed unit for optimum; 5. Safety. Test Method: The stainless steel nut is heated to a temperature of 900°C in a muffle furna

Gauging Length Instrument of Tensile Specimens DX-400

20190815

angles, dotting with the impact of elastic spring, the handle shaking one circle will make a straight line on the specimen, the space of 10 mm, a total of 30 points = 300 mm long. Main technical spec

200/500/1000/3000/5000N.M Automatic Metal Wire Spring Material Metal Universal Torsion Tester

20190821

angle, loading rate indicating, peak holding and other functions. 7. Test data can automatic process and display, and print out the test date, number, material quality, reverse, strength and other te

Sobek SP-3015B Vertical Profile Projector

20190123

angle 0～360° Resolution of rotation angle 0.01° or 1′ Accuracy of the rotary angle 6′ Object lens’s magnification 10×（standard） 20×（optional） 50×

Digital Halogen Moisture Analyzer

20161204

Machine, CNC Router, UV Line, Press, etc. 6. Glass Machine: Edge grinding machine, bevelling machine, angle-changing edging machine, sandblasting machine, drilling machine, washing machines, etc.

SM86 Drug Sterility Test Pump

20230721

angle for choice. 8. Side installed with pushbutton power switch with light. 9. Bottle holder can meet the demand on hanging for the pouch. 10. English and Chinese operation language for choice

Torque Meter Tester Testing Measuring Machine 0.15~500kg

20221112

size 12 angles or 20 mm² Dimension 230*120*60mm Weight 2.0kg Note Can`t be used to test the continuous impact type semi-automatic electric or pneumatic tools.Can`t exceed the measuring range.

High Precision Rotation Luminaire Goniophotometer

20230907

angle coder which keep the test results with high accuracy. It is for industrial laboratory photometric data measurement of all kinds of luminaries such as LED luminaries, HID lamps, fluorescent lamp

Digital Surface Roughness Tester

20230830

Angle 90° Vertical Radius 48mm Maximum Driving Stroke 17.5mm/0.7inch Cutoff Length 0.25mm, 0.8mm, 2.5mm Driving Speed Measuring Sampling Length: 0.25mm Vt: 0.135mm/s Sampling Length: 0.8mm Vt: 0.5mm

NACTP Automatic CT PT Comprehensive Analyzer

20180827

angle difference for all kinds of CT (such as protective type, measuring type and TP), but also can test the VA rating curve, ratio, polarity, secondary winding resistance, phase or angle difference

NDW-500 Computer Controlled Torsion Testing Machine

20120515

angle 0-999º 7 Relative error of indicating value of torsion angle Within ±1% of indicating value 8 Torsion speed 3.6-360º/min. (stepless speed regulation) 9 Relative error of torsio

ACP Electrical Current Transformer Test, CT/PT Analyzer

20210224

angle difference) measurement 8. Primary Current Injecting 9. Withstand Test of Power Frequency Alternating Current 10. Secondary Load Test 11. Secondary Winding Test 12. Measuring the volt-ampere

ST3007 Digital Measuring Projector

20180729

angle digital display resolution: 1’or 0.01º Objective Magnify multiple: 10X (standard) 20X(option) 50X(option) 100X(option) Objective field: Ø30 mm Ø15 mm Ø6 mm &Osla

Made in China HZ-3120A Automatic Transformer DC Winding Resistance Tester

20210426

angle and other data when measuring, to better analyze the quality of the test product The instrument uses 8.0 inches 800 × 600 dot matrix K600 + core 65K color DGUS screen, touch operation, can be

Crease and Stiffness Tester

20180628

angle. The C0039-M2 model offfers added functionality of being able to test for round corner creases. Any corner crease can be tested with the easily changeable Round Corner Jaw. Applications: &bul

AS-2011 Micron Laser Particle Size Analyzer 0.1-500um

20100926

angle 21.5 degree. Crossly positioned irregular side array comprises 5 photocells with maximum angle 75 degree. Technologies of software -Two login ports one for the administrator the other for the o

100A Permalloy AC Clamp On Ct for Power Quality Analyzer

20180509

Angle meter Resistance tester Features 0.1% accuracy clamp on ct Low phase shift for power measurement Improved ergonomic design Easy operation High content Permalloy core Measurement range o

JB-500S Impact Testing Machine

20211028

angle: 0 ° 9. Radius of impact knife: 2 ~ 2.5mm 10. The inter angle of the impact knife: 30 ° ± 1 ° 11. The thickness of the impact knife: 16mm 12. Sample specifications: 10 × 10 × 55mm 13

Horizontal and Vertical Flammability Tester UL94 IEC 60695

20170530

angle, then observe whether it is burned,and use The burning time and burning length to evaluate fire risk . 2.This tester is used for the flammability testing of plastic materials such as V-0 V-1

Ponovo NF802 IEC61850 Protection Digital Relay Test Kit for Digital Substations

20230609

angle0 to 359. 9°Accuracy<0.1°,50/60HzResolution±0.01°8 pairs of binary input(A-H)Input characteristic30V～250V (DC)or empty contact (automatic identification)Sample frequency10kHzTime resolutio

Refractometer RA-620 / RA-600

20140212

Angle of Optical Refraction Light Source LED Na-D Line (589.3nm) Measuring Items Refractive Index, Brix, Other Concentrations Measuring Range Refractive Index (nD) 1.32000 - 1.58000 1.3200 - 1.7000 B

Hot Sale Surface Roughness Tester SRT-6200

20230607

Angle 90° Vertical Radius of Guiding Head 48 mm Maximum driving stroke 17.5 mm / 0.7 inch Cutoff length (l) 0.25 mm / 0.8 mm / 2.5 mm optional Driving speed Sampling When Length = 0.25 mm, Vt = 0.13

Horizontal Vertical Combustion Tester

20221130

Angle: 0~45°(manual adjustment, with scale); 3. Ignition bedding plate: standard medical cotton; 4. The combustion gas: 98% methane standard gas or 37MJ/m3±1MJ/m3 natural gas or propane (gas); 5.Ga

12kV Transformer Capacitance &Tan Delta Tester

20240130

12kV Transformer Capacitance &Tan Delta Tester Product Description Highly accurate loss angle tangent/power factor measurement equipment is used to measure very low dielectric losses in high voltage

Ulso High Acoustic Sensitivity Immersion Transducer

20220308

Product DescriptionImmersion TransducerAn immersion transducer is a single element longitudinal wave transducer with a 1/4 wavelength layer acoustically mached to water.It is specifically designed to

Salt Spray Tester (SO2 Sulfur Dioxide

20231120

angle are placed to ensure the specimen is inclined at 15-30 degrees. Pressure barrel is welded seamlessly with 2.0mm SUS304 stainless steel plate Salt spray tester（SO2 sulfur dioxide) With color

EHP210 Leeb Digital Hardness Tester

20240313

angle, even upside down Compact plastic case, suitable for use under poor working conditions. Large screen (5 inches), showing all functions and parameters. With background light Large capacity memor

Drop Test Machine

20240416

angle of the sample. This equipment is mainly used to evaluate the ability of product or packaging to withstand drops during transportation and loading and unloading, so as to improve product and pac

Digital Protractor 360 Degree with Length Scale 300mm/11 Inch

20230221

Sisco 2-in-1 digital protractor can not only measure angles, but also measure lengths as a ruler. Angle measurement range is 0-360 degrees, length measurement range is 0~300 mm/11 inches. Sisco digit

LM-79 Moving Detector Type C Goniophotometer

20231024

Angle, EEI, UGR, etc. Features:• The near field detector moves together with the big mirror in a line. The big mirror and the far field detector move synchronously.• The burning position of the l

Power Quality Analyzer(3P)

20201231

angle and neutral line current • Supports a variety of wiring such as single-phase 2-wire, single-phase 3-wire, three-phase 3-wire and three-phase 4-wire • Displays voltage and current in wavefor

KRD60 3-DOF Test System Motion Tester Motion Training Simulator

20240402

angle tilt caused by ship damage, manipulation, imbalance in loading and unloading, and wind. The sway test is mainly applicable to long-term swaying of the ship due to external forces such as wind a

Phantomlab ECTphan 330

20230822

angled ramps provide the ability to measure slice thickness. Uniformity Section: The uniformity section provides a 20cm diameter area that can be visually examined for artifacts and non-uniformities.