EC21 Product Catalogs - chang

ESS Chambers-Rapid Temperature Change Test Chamber

20231107

change test chamber, accelerated stability chamber,pressure test chamber is designed to simulate the harshest environmental conditions at acceleration rates of -35°C to 200°C in a single stage or -

Seam Stripper

20250106

change in few seconds. Models are available for most common can sizes of beverage and food cans. When ordering, the end diameter and can height must be specified so that the appropriate change parts

YH800C Portable Fully Automatic Pressure Calibrator

20241225

changing the time-consuming and laborious problem of traditional calibration methods.YH800C on-site portable fully automatic pressure calibrator is a highly integrated portable calibration device des

Bebur BT6308 Ozone Analyzer for Drink Water Wastewater Industrial Process Water

20241224

the sample water, and the output signal of the sensor is compensated by an electronic device, so that the measured value can be corrected with the change of temperature (temperature compensation).

Photovoltaic Freezing Test Chamber

20241118

environment can endure the degree of the specimen can be detected in the shortest possible time due to thermal expansion and contraction of the chemical changes caused by the physical damage.

Hot Sale Turbidity Meter for Water Reliable Turbidity Sensors and Transmitters with RS485

20240929

change to different measurement range , improve flexibility ◇Multiple beam RD measurement technique , to compensate for the effects of ambient light , pickup ,element aging affect ◇Two -point cal

Combined Vibration Climatic Chamber

20240809

changes during transportation and actual use, expose product defects, and is an essential and important testing method for the entire process of new product development, prototype testing, and produc

EMCEE Model 1143 Micro-Filter Analyzer

20240808

change in filtration performance after storage, pretreatment, or commingling can be indicative of changes in fuel condition. Causes of poor filterability in industrial/refinery filters include fuel d

NDJ-1C Hot Melt Adhesives Brookfield Viscosity Meter

20240705

change of viscosity with time, rotation speed or rotor (shear rate) and temperature in real time, which provides a good understanding of the viscosity and rheological properties of non-Newtonian l

Maintenance Free Real-time Rebar Special Measuring Instrument GDC-L350-JX

20240703

changes in meter load tolerance caused by changes in contour dimensions, allowing timely and accurate judgments to adjust the rolling mill or replace rolls, thereby shortening the time to adjust the

High Low Temperature Low Air Pressure Test Chamber

20240624

changes in temperature and / or humidity parameters, pumping time, duration - regulated by Russian or other standards, including international standards; ² The presence of heat from the test product

ST-6600 Plug Skin High Voltage Tester

20240614

to find the gas bubble and exposed copper wire. Features: Output sensitivity can be adjust continually Alarm functions of light and voice for NG sample Test fixture is simple and easy to change

F105/F305/F505/F505H Advanced Test Stand Frame

20240530

change with load. 2. Convenient modular Frame bases can be easily removed and extended. Most electronics parts are housed in the frame, easily accessed and replaced. 3. External limits switch Solid-

Professional FI Manufacturer for Power Distribution Network Intellegent Wireless Office System

20240520

change of current, grounding fault, and the fault state, real time current, battery voltage and other information. is uploaded to the remote server, which provides reliable data for the various types

KRD100 Incline Impact Tester

20240416

change value Driven by a motor, with simple structure and high reliability, no pollution Complete control and measurement system, simple and convenient operation, integrated control and measurement T

VC5000A Power Quality Analyzer

20240416

changes in voltage and current, monitor starting current, monitor various power parameters and generate alarm events list, record test data fora long time and generate trend curves Picture and other

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

change with arrow buttonsAutostepFully programmable for function, start delay, stepvalue, time per step, repeatEnvironmental SpecificationsOperating temperature-10°C to +50°CStorage temperature-20

KRD100 Multi-Function Packaging Testing Laboratory Incline Impact Test Equipment

20240402

change value.High-strength and low-friction profile guide rails are beneficial to the accurate free sliding of the block.For heavy-duty test products, the horizontal rotation mechanism of the composi

Product Purchasing

20240329

changes and modifications to the design to improve the efficiency of purchasing goods from China. Source candidate suppliers - Our next task is to find the right factories to manufacture the product

Coefficient of Friction Tester ASTM D1894 Plastic Friction Coefficient Tester Paper Friction Testing

20240325

150mm/min(ASTM) Power AC 220V 50Hz ( can be changed to local requirement) Dimensions 540mm(L)×38mm(W)×24mm(H) Coefficient of Friction Tester Standards ASTM D1894, ISO 8295, TAPPI T816, GB 10006

Automatic Image Measuring Device

20231012

change ＜ 2 ℃ / HR, humidity 30-80%, vibration ＜ 0.002g, lower than 15Hz Category Core components Brand Quantity Main part Base and column Shandong Taiqing marble component 1 set Mobile workbenc

Three Comprehensive Environment Humidity Integrated Combined Humidity Vibration Test Machine

20230814

The Temperature And Humidity Vibration Test mainly provides temperature and humidity change environment for scientific research and production units such as aerospace, aviation, petroleum, chemical i

Radiation Monitoring System

20230926

changes in the radiation field generated by radioactive sources or radiation equipment. This capability ensures the safety of radiation workers by promptly identifying potential risks and enabling ap

High Low Temperature Test Chamber

20231013

High low temperature test chamber is a test equipment that simulates the temperature change in the natural environment by technical means to test the performance of the specimens. It is mainly used t

High Quality High Transmittance UV Fused Silica Windows

20240201

other elements of these environments to mix. And it does not change the wavelength distribution of the beam, the transmitted wave front, nor does it scatter any of the light out of the beam.

3kW/3.5kW/4kW/5kW/6kW/7kW AC/DC Load Bank for Data Center Load Test

20230615

changes2: To test UPS,air conditioning fresh air system, lightning protection and grounding system, monitoring system, computer room comprehensive environment, cabinet IT environment, computer room d

LT-03 Leak Tester

20240202

change language to local type. For GMP purpose, we can add access level management. We provide a variety of chamber shapes and sizes. Why do you need LT-03 Leak Tester? LT-03 leak tester is the first

Thermo Niton DXL Precious Metal Analyzer

20230815

changing the calibration.Precisely determine the presence and concentration of other trace alloying elements and dangerous heavy elements, which could impact valuation and future refining needs.Built

MDKN Gas Meter Endurance Test Bench

20240308

change not exceed ±300Pa.3. Can meet the requirements of the cycle a and cycle b cycle test methods.4. The test volume of the maximum flow method is 0.05V, 0.4V, 0.7V, and V (where V is the total vo

DL400 Pro Smart Screen Tester

20230908

changes from a small red square to a large green square. The selling point of the original color repair: DL400 Pro Smart Screen Tester supports the original color repair to make the display more vivi

China Enviclone Programmable Walk in Large Size Salt Fog Spray Corrosion Test Chamber

20240113

changes of components and equipment in a salt spray environment. This large salt spray chambers bring salt fog spray, temperature and humidity together. enviClone has such test chambers compliant wi

Walk-in Climatic Test Chamber

20240117

inner chamber size, inner chamber stratification, temperature range, temperature change rate, and other specifications can be customized according to customers testing requirements

EST-FG1V Manual Force Measurement Test Stand

20240313

changes of various test forces. EST-FG1V Manual Test Stand Features EST-FG1V manual test stands is easy to use with its rugged construction. Precision manual handwheel is equipped. The testing capaci

Kiln Flue Gas Temperature Infrared On-line Monitoring System

20230513

online monitoring of kiln internal temperature, which provides a basis for operators to grasp the changes of kiln internal temperature in real time and improve the level of process control.

LITE800 Industrial SLA 3D Printer

20230615

Change Rate 1 °C/hour Relative Humidity < 40% Machine Size (W x D x H) 1555 × 1445 × 2215 mm Machine Weight 1050 kg Initial Resin Weight 560 kg Resin Vat Manual / Fixed Processing and Finishing Po

Toughened Glass Shelves

20230822

change around 200°C. 4. Toughened glass panels will shatter into oval-shaped fragments when broken, which eliminates the danger of sharp edges and relatively harmless to human body. 6. Toughened gl

LED Power Driver Tester

20240102

Changing curve and data of the lamp voltage and lamp current within 0~2 seconds.• Lamp voltage range: 3~500V; Lamp current range: 5mA~8A 6. Harmonic TestingTotal harmonic and the harmonic component

12PSB Diesel Fuel Injection Pump Test Bench

20230605

Changing frequency changing rotational speed 2. Low fall of rotational speed and high output torque 3. High measurement precision; 4. The functions of over voltage, overload and short circuit protect

Dissolution Tester Device

20231012

changeable). ※• Fully adjustable cup holder. ※• Adjust the shaft system in all directions, and the machine head can be lifted and lowered electrically.• Low noise, long life, multiple prote

Solar Simulator Xenon Lamp Light Source Solar Cell IV Test

20240104

change the light output spot size Lamp life 500-1000 hours Cooling method Air-cooled Accessories and photocatalytic xenon lamp light source accessories common, can be combined with a variety of filt

Good Price Chair Armrest Fatigue Durability and Bending Durability Testing Machine for Office Chair

20210410

change the position; 2. The loading pad is attached to the handrail under test, and the cylinder can choose to work without retracting to increase stability; 3. Precise manual pressure regulating val

Made by Yongstar YFT Series Horizontal Claws Clamping Type Hydraulic Valve Seat Test Bench

20230330

changed by itself. So it can reduce oil temperature, elongate the life of valve test bench. 8. PLC control touchscreen display pressure diagram and printer system is optional. 9.Safety door is option

ICONE2

20200511

changes. Spark Ignition - By 10kV spark generator fitted with a safety cut-out device. Exhaust System - Manufactured from stainless steel for long life. This comprises of a hood, a gas sampling rin

Digital Salt Checks

20190703

change batteries. 5) Battery In case of no use for a while, please remove batteries. 6) Keeping Keep the instrument in a cool place. Clean the instrument, especially 'Sample Spoon' after measurement

IEC60529 Waterproof Testing Machine IPX12 Vertical Rain Drip Box

20210722

change. The stainless steel protective cover under the nozzles can protect user from any hurts. ● Equip with high accuracy filter, the filter element can change regularly. ● Control system: 7 i

Hand Held Lube Oil Quality Analysis Kit

20230106

Product Introduction: THY-23A Oil Analyzer is applied to analysis the quality of lubricant oil .The simply operating process only takes 10 seconds to detect oil pollution degree.The analyzer has main

Factory Supply Metal Thin Sheet and Metal Strip Erichsen Cupping Testing Machine

20190821

changed the past oil source afterburner loaded servo motor constant speed, at the same time, we have changed the hydraulic sensor to wheel-spoke sensor, it improve the accuracy and precision of testi

ACP Electrical Current Transformer Test, CT/PT Analyzer

20210224

change range in 0.1/0.4/2/10A) 8 Current measurement error <±0.1%+0.01%FS 9 Voltage measurement range 0~200 V (automatically change range in 1V/10V/70V/200V) 10 Voltage measurement error < ±0.1%+0.

Digital Halogen Moisture Analyzer

20161204

Machine, CNC Router, UV Line, Press, etc. 6. Glass Machine: Edge grinding machine, bevelling machine, angle-changing edging machine, sandblasting machine, drilling machine, washing machines, etc.

Torque Meter Tester Testing Measuring Machine 0.15~500kg

20221112

changes with torque F.PEAK Display the first maximum value Zero adjustment Press the key of ZERO-CHECK or key of CLEAR until zero value is presented Power supply Nickel-cadmium rechargeable battery 1