EC21 Product Catalogs - external

Quartz Cuvettes 2mm QS-2

20260416

Quartz cuvettes 2mm QS-2 External size: Height 45mm x 12.50mm x 4.50mm Pathlength 2.0mm, we supply from 1mm to 100mm,pls see below picture Polished windows:2 Material type: Synthetic high purity qua

Medical Insulation Detector

20250226

External insulation performance test for electrical hook, electric rod, electric coagulator, electric coagulation forceps and other electric surgical instruments ; 3. External insulation performance

Fluke 393-IRR-PVLEAD Solar Kit with True RMS Solar Clamp Meter, Irradiance Meter and MC4 Test Leads

20250220

Lead Set MC4 Solar Clamp Test Lead Set Magnetic Hanging Strap External Temperature Probe with Suction Cup Carrying Case with Shoulder Strap Premium Carrying Case User Manual Three-Year Warranty

Valid Magnetics Air Cooled / Blower Hysteresis Dynamometer for Motor Test, Torque, Speed and Power

20250205

external source) AHD type: cooling by compressed air BHD type: cooling by dedicated blower Our hysteresis dynamometers have achieved accuracy ratings of ±1% full scale, depending on size and syste

Stress Cracking Tester

20250106

External calibration connector for easy calibration of the total air source. Door status sensing, rapid air release by opening the door during the test. Leakage detection during pre-inflation to prev

YH800C Portable Fully Automatic Pressure Calibrator

20241225

externally connected to any range of pressure modules; ◆ 7-inch touch screen display, icon style management menu, Chinese and English operation interface; ◆ Measurement value digit display: 4, 5,

Three-box High and Low Temperature Alternating Test Chamber

20241112

external test power or signal cablesviewing window210 x 275mm or 395 x 395mm (effective field of view)Outer case materialHigh quality A3 steel plate electrostatic sprayingInner box materialImported h

Smoke Heat Detector Test Tunnel

20241019

is an external data interface, which can exchange data through MODBUS protocol. 19． The smoke box shall be equipped with smoke exhaust fan (including smoke exhaust hose) 20． Excluding MIC

Medium Force Shaker System (Air Cooled)

20240901

external guide can be used for heavy, unstable loads. Exciting force range of 30kN to 70KNMax. Load range of 500kg to 1000kgDisplacement peak-to-peak: 51 mm,76mmJOEO water-cooled high-force shaker sy

EMCEE Model 1154 Precision Conductivity Meter

20240813

Test Method D 4308, a CU is equal to a picosiemen per meter (1 CU = 1 pS/m). The enclosure technique employed in the Cell precludes the need for external screening from stray electrical fields.

Additel ADT878-160-NO-220V

20240722

task documentationFull HART communicatorOptional external temperature controlWi-Fi and Bluetooth capableColor touch screen displayQuick-Push connectors (PC Option) Contact Us Wisnu Precision

NDJ-1C Hot Melt Adhesives Brookfield Viscosity Meter

20240705

configuration Host: 1 set External drum: 2 piece High temperature heating furnace: 1 piece Rotor: 21/#, 27#, 28#, 29# Temperature control device: 1piece Power supply, cable: 2 piece

Cuvettes&Cuvettes(Glass)&Cuvettes (Quartz)

20240705

external force on the color plate, resulting in stress damage. 3, can not be placed on the flame or electric oven for heating or drying oven baking; . 4. When it is found that the colorimetric dish i

Maintenance Free Real-time Rebar Special Measuring Instrument GDC-L350-JX

20240703

external inspection of rolling stock according to different standard site conditions of different rolls in each steel plant. Online monitoring of contour dimensions provides accurate and timely feedb

High Low Temperature and Humidity Test Chamber

20240624

External dimensions (D*W*H) 1250*900*1300 mm 950*900*1500 mm 1500*850*1650 mm 1750*1050*1850 mm 2100*1200*1950 mm Temperature Control mode BTHC: Balanced temperature & humidity control Working enviro

Shortwave Infrared SWIR TEC Cooled Thermal Camera with InGaAs Detector for Target Measurement

20240620

external trigger 1~100Hz Exposure time 10μs~1 frame period Image processing Automatic exposure, automatic gain, non-uniformity correction, automatic dimming, image enhancement, blind pixel replaceme

Gear Measuring Machine for Worm Wheel Rotary Table,Bevel Gear,

20240531

external straight teeth, helical teeth, spiral bevel teeth, involute splines, hobbing cutters, shaving cutters, gear cutters, worm gears, etc. Technical Parameters Model 30 45 65 80 100 120 Teste

F105/F305/F505/F505H Advanced Test Stand Frame

20240530

External limits switch Solid-state upper and lower limits’ switches may be set the test limits or testing exception. Dual-graduated rulers’ aid with switch placement. 4. Perfect force sensor inte

GS-SW6401725-80-U Scientific Deep-cooled SWIR Camera

20240530

External trigger port MCX L ens mount C/CS Power input 220V AC Power consumption ＜3 W TEC off Peak power consumption ＜600W@-80℃ Operation temperature 0℃ ~ ﹢40℃ Storage temperature

IEC61180-1 1.2/50us Impulse Voltage Generator

20240528

external oscilloscope to monitor waveform. 2. SpecificationModelLSG-255Control and display modeLCD+touch screenoutput voltage (open circuit)500V-12KV±5% (customize-able)Frontier time1.2μs ±30%Half

Hot Sales of ELK4 Series Short Circuit and Fault Indicator

20240520

high capaci ty lithium battery, battery operating life long (more than 8 the external structure of the year); the clamping or lock design, simple and convenient loading and unloading machine.

Additel ADT761

20240515

Pressure generated by built-in pump and controlled automatically from 90% vacuum to 375 psi (25 bar)Pressure measured with external pressure modules (ADT160 series) to 10,000 psi (700 bar)0.02%FSFull

Gravimetric Water Meter Test Bench

20240509

external factors and cost-effectiveness make it a dependable and economical choice for long-term use. We are a professional Gas Flow Measurement supplier, providing high-quality products and have qua

Testing Equipment

20240416

external climate and mechanical environment during the design and application process. Reliability testing is to verify the ability of the product under the specified environmental conditions. The re

High Voltage Wire Harnesses/Cables Testing Bench Top(Table) for Automotive

20240412

±3%±0.1 100K-1MΩ; ±5% 0.01-75Ω; ±3%±0.01 ICR Test Frequency 50Hz-1MHz optional Test Signal Level 0.1V-2V Bias Current Internal: 0-1A optional External: 0-120A optional

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

external box or second tool for everyday HART calibration and maintenance.Offers fast HART communication.Supports popular models of HART transmitters, with more devise-specific command support than a

KRD60 3-DOF Test System Motion Tester Motion Training Simulator

20240402

external forces such as wind and waves, which must be maintained normally or products that work reliably, and products that have a significant impact on their performance in a rocking environment. l

High Purity Gas Generator, Hydrogen Generator, Nitrogen Generator

20240307

power (W) 200 Environmental conditions and temperature: 10-40 ℃; Relative humidity: ≤ 85%; No large amount of dust and corrosive gases External dimensions (mm) 320 * 180 * 350 (L x W x H)

Xenon Lamp Weather Resistance Test Chamber

20231013

External dimensions (D*W*H) 1400*750*1500 mm 1840*1150*1900 mm Performance Temperature range -70～ +80℃ Humidity range 40～95%R.H. Temperature fluctuation ±2℃ Temperature accuracy ±1℃ Hu

Flexible Rogowski Coils

20231031

External Field: ± 1.5% maximumCoil Working voltage: 1000VRMS or 1000VDCCoil Dielectric Surge Withstand: 5kVRMS for 1 minuteOperating temperature: -20ºC to +60ºCLeads: Shielded cable, or as per cus

GBPI Automatic Oxygen Transmission Rate Tester Y310 2.0

20220901

external accessories. Precision: 0.1℃. 2)Humidity control: Dual gas flow method(dry gas and humid gas), with broad range, high precision (1%RH) and stable flow. 3)Carrying cutting-edge ARM control

Automatic Kinematic Viscometer

20231019

external cold source. Temperature control accuracy ±0.02°C 4.Unit of work: 2 units 5.Timing accuracy: ±0.01S 6.Test accuracy: <1% 7.Heating method: electric heater 8.Display: Color touch screen 9

LT-JJ03-B Office Chair Repeated Impact Test Machine

20210410

External Size1350* 1000* 2200mm Technical parameters 1. Maximum impact height: 250mm 2. Impact frequency: 5-15 times/min 3. Sample limit: length 1000× width 1000× seat height (300 ~ 650mm) 4. Im

YFT-400 Horizontal Claws Clamping Type Flange Valve Test Bench for Gate Valve Seal and Shell Test

20230330

external force on the tested valves, which is in accordance with the requirements of GB/T 1392-92JB/T 909-99 and API 598. 3. The right workbench can be turned over 90 degrees，for the convenience of

Surge Generator

20240102

External Optional)It can be selected according to the maximum output voltage of the surge and the maximum input of the EUT. Please visit LISUN CDN61000-5P to learn more details.N/ACDN for Communicati

Falling Dart Impact Tester

20231016

Background Impact strength is a crucial parameter for assessing the quality of plastic films. It plays a significant role in determining a film's ability to withstand external forces and impacts, w

IEC60068-2-75 Spring Impact Hammer for IK01 IK02 IK03 IK04 IK05 IK06 and IK07 Impact Test

20210722

external mechanical impacts. it is suitable for outer casing, operating rod, handle, knob, indicator light, signal lamp and lampshade of household and similar electronic and electrical products and t

Pipe Drop Weight Impact Tester Machine

20221130

external impact resistance of the board, also suitable for rigid plastic board. Digital display impact height, with automatic hammer suction, automatic zero, automatic lifting, prevent the second imp

Programmable Hast Accelerated Aging Tester for Industry

20230727

External Dimension Φ×D (mm)850×1300×900900×1350×9001000×1480×10001150×1650×12001300×1800×1350Steam Temperature Range Steam Temperature Range: 100ºC~135ºC, (143ºC is optional) Relative

Humidity Chamber Generator Humidity Sensor Probe Calibration Hygrometer Test Calibrator

20221209

external drying cylinder, desiccant replacement can be operated on-line, convenient and simple * Design of double-zone drying cylinder, supporting both molecular sieve and discolored silica gel * Vis

Automatic Capacitance and Dissipation Factor Test Set

20240130

externally connected if further testing is required. 12KV high voltage is generated by internal transformer of the instrument.. External standard capacitor and power supply can be connected if furthe

Niton DXL Precious Metal Analyzer

20230710

external power) 110/220V Adhesive tack for precise sample positioning Standard analytical range: 21 elements including all precious metals. Nondestructive analysis with near instantaneous results. Ex

High Temperature Oven

20231120

external chamber temperatures below 40 degrees Celsius.If you need more models about our test equipment, please reference our chamber-testing（.）com Feature Digital display controller or touch sc

New Olympus EPOCH 650 Ultrasonic Flaw Detector

20230604

carrying case with pouch (navigation pad version)• N600-EXTALM (U8780332): External alarm beeper• CBAS-10669-0010 (Q7790008): Encoder cable for B-scan buggy (10 feet, other lengths available)

100k - 10T Micro Signal Type Tester Resistance Capacitance and Inductance Tester

20240119

external single pulse signal input interface, making it easy for pipeline operation. The quipped communication interface can achieve the off-site operations of all functions of the instrument through

VICIMETER Megga Resistance Testing VC60B+ Insulation Tester

20220419

external DC 9V power source Power consumption Quiescent current approx.3 mA General characteristics Color Dark gray-yellow Weight 580g (including battery) Meter size 176 (L) x116 (W) x62.5 (D) mm Sta

Falling Dart Impact Tester

20180829

external destruction. Technical Features 1. PLC control and touch screen operation 2. Two tests methods of A and B 3. Test results multi-units display 4. Electromagnetic suspension and automatic

High-Strain Dynamic Pile Tester

20161117

external u-disk (8) During test every blow can be saved automatically (9) Storage capacity of more than ten thousands blows. (10) HPT can be used for pile driving monitoring and the cast-in-place

Electronic Tensile Strength Test Equipment LDS-50A

20190815

200mm/min divide class adjustment; 7) Tensile space: 0~700mm 8) Compression space: 0~700mm 9) Test space width: 360mm 10) External size of host: 760*460*1900mm 11) Supply power: 0.75KW, 220V, 50Hz.

Low Temperature Meter / Impact Testing Machine

20190821

external form: 910 * 510 * 920mm (length * width * height) 5.The effective working space: 275 * 160 * 120mm 6. The sample quantity can be loaded: > 60 (The impact of sample size: 10 * 10 * 55mm) 7. D