EC21 Product Catalogs - iec design

Fluke TI480 PRO Thermal Imaging Camera

20250226

design for one-handed use: YesDigital zoom: 2x and 4xTemperature measurement Temperature measurement range (not calibrated below -10 °C): ≤-20 °C to 1000 °C (-4 °F to 1832 °F)Accuracy: ±2 °C

Fluke TIX580 Infrared Camera

20250109

design and neck strap make long inspection days much easierGet an in-focus image with the touch of a button. LaserSharp® Auto Focus, exclusive to Fluke, uses a built-in laser distance meter that cal

New Fluke TI480 PRO 60HZ Thermal Imager

20250104

design for one-handed useYesThermal sensitivity (NETD)**≤ 0.05 °C at 30 °C target temp (50 mK)Level and spanSmooth auto and manual scalingFast auto toggle between manual and auto modesYesFast aut

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber

20240603

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber Dustproof test chamber is designed according to the standards of GB/T10485-2007, GB2423.37-2006 test L, GB4208-2008, IEC60529 (IP code), GB7001-1986

Constant Acceleration Tester

20240416

designed to indicate types of structural and mechanical weaknesses not necessarily detected in shock and vibration tests. Many standards specify the constant acceleration test procedure, especially t

Fluke 754 Documenting Process Calibrator and Hart Instrumentation

20240408

designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers most of the communication capabilities of a HART communicator. To create a seamles

KRD11 Pneumatic Vertical Shock/Bump Test System Impact Testing Machine

20240402

design or layout of the products. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform sh

Electrodynamic Vibration Generator System

20230907

LVD-100KG/LVD-100KG-6D Electrodynamic Vibration Generator Test Table is according to IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 and other relevant standards. • LVD-100KG: Combined the Ve

EnviClone IEC 61215 From IPX1 Through IPX6 Combined Water Rain Drip Spray Flush Test Chamber

20240113

IEC 60529, ISO 20653, DIN 40050-9 and DIN EN 60529, etc. The interior test space can be customized as per specific test requirement by enviClone technology. SpecificationsFollowing is one of our IPX1

NACTP Automatic CT PT Comprehensive Analyzer

20180827

Product introduction NACTP Automatic CT PT Analyzer is designed for analyzing current transformers (CT) and voltage transformers (PT) of protection or measurement use. Which is suitable for laborato

Glow-wire Test Apparatus

20240102

The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < Basic testing methods

IEC-60156 Transformer Oil Breakdwon Voltage Tester, Insulating Oil BDV/Dielectric Strength Test Kit

20180515

IEC-60156 Transformer Oil Breakdwon Voltage Tester, Insulating Oil BDV/Dielectric Strength Test Kit JS-023A Series High Quality Intelligent Transformer Oil Dielectric Strength Tester is specially de

IEC60529 IP56X Sand Dustproof Test Chamber

20210722

Dustproof Test Chamber Dustproof test chamber is designed according to the standards of GB/T10485-2007, GB2423.37-2006 test L, GB4208-2008, IEC60529 (IP code), GB7001-1986 and etc. This equipment is

TTR-I Fully Automatic Three Phase Power Transformer Turns Ratio Test Set

20220314

TTR-I Fully Automatic Three Phase Power Transformer Turns Ratio Test Set Introduction: TTR-I Transformer Turns Ratio Tester is designed according IEC76-1 and IEC60044. It can be applied to test the t

Horizontal Vertical Combustion Tester

20221130

The China Qiantong® Horizontal Vertical Combustion Tester is designed and manufactured according to the requirements of Volkswagen PV3357 standard, IEC60950-1, UL94, IEC60707, IEC60695-2-2, GB5169,

Package Large Scale Simulation Transportation Vibration Tester

20230727

design, easy to use.6.Rotary vibration (commonly known as horse racing type), in line with European and American transportation standards. Vibration Testing Machine Technical Parameters: ModeAS-100AS

Enviclone IEC 62782 Photovoltaic Modules Solar Panel Cyclic Dynamic Mechanical Load Test Machine

20240111

Description enviClone Dual Static and Cyclic (Dynamic) Mechanical Load Tester or Testing Machine is a specially designed for IEC61215 standard MQT16, MQT20 clauses and IEC 62782 to test impact resist

Thermal Shock Test Chamber(2 Zone)--Thermal Chamber Manufacturers

20231107

Application JOEO temperature shock test chamber meet common test specifications including MIL-STD 883, MIL -STD 202 and a variety of other test standards such as IEC and JEDEC. JOEO Thermal shock ch

ST Portable BDV Oil Test Kit,Oil Dielectric Strength Tester

20210224

design makes the tester has a good performance at stability and anti-noise. Functions: 1.Breakdown test of user-defined 2. Proof test 3. IEC156/IS6792/BS5874/ 4. ASTM D1816 standard test 5. ASTM D877

ST9602P Temperature & Humidity Testing Chamber

20201002

IEC60068-2-56, IEC60068-2-30) According to IEC60068, GB2423.1, GB2423.2, GB11158, GB10589 and GB10586 etc. RS232 Com port with professional installation software to record and save the test result. T

Dustproof Testing Machine | Dust Proof Chamber

20231024

design, improvement, verification and factory inspection of the product. Fully meets IEC60529:1989 +A1:1999 +A2: 2013 ,IEC60598-1, GB2423.37-89 (Test L: dust test methods), GB4208, GB/T 4942.2-93(pro

Ponovo POM2-3243 Universal Protection Relay Test System for Protective Relays

20230609

IEC61850‐8‐1More than 500 relay templates offered freely to do automatic testingsSupport to import CSV, RIO and XRIO files Modular Structure Evolutional modular structure design with only 4 modu

Programmable Anti-yellowing Resistance Corrosion Tester

20160523

Design criteria: (1) ASTM D4587: Standard Practice for Fluorescent UVCondensation Exposures of Paint and Related Coatings (2) ASTM D4799: Standard Practice for Accelerated Weathering Test Conditions