EC21 Product Catalogs - material testing testing

Steel Pipe Steel Tube Steel Bar Rebar Materials Bending Testing Machine

20190815

Overview GW-40B Type Steel Bar Bending Testing Machines is special equipments which process cold bend tests and plane rebend tests. Its main technical parameters meet GB1499.2-2007 , YB/T5126-2003 an

10kg 100N Metal Material Universal Tensile Compression Bending and Shearing Testing Equipment

20190821

Application of equipment This machine is applied in analysis and research of statics property testing of tensile, compression,bending, cutting, holding and other items of metal and nonmetal material

Secure Seal Tester

20250106

materials, solid and durable.Equipped with Pressure Reducing Valve inside the machine, setting the max. testing pressure easily.Some of these safety features are the series safety valve, the aligning

XLR Sniffer / Sender Microphone Cables Remote Cable Tester

20241210

XLR Sniffer / Sender XLR Sniffer / Sender can test remote mic cable, easy to operate and read results, also easy to carry. Power by a 23 V battery. Aluminum material, strong and durable.

Photovoltaic Freezing Test Chamber

20241118

Photovoltaic freezing walk-in chamber is used to test the material structure or composite material, in the instant by the extremely high temperature and very low temperature of the continuous environ

UTOCO Handheld Laser Methane Detector Natural Gas Pipe Line Monitoring

20240926

material ABS Device interface USB-Type-C Input Voltage DC 3.7V Detecting gases Methane (CH4) Detection Principle laser absorption spectrum Detection laser power ≤15mW Detection of laser safety Clas

Portable Hardness Tester

20240925

Testing surface of a small hollow space ● Material identification in the warehouse of metallic materials ● Rapid testing in large range and multi-measuring areas for large-scale work piece Config

Combined Vibration Climatic Chamber

20240809

materials to temperature, humidity, vibration, and composite environmental changes during transportation and actual use, expose product defects, and is an essential and important testing method for t

Emcee Model 1140 Micro-Separometer

20240808

Water Separation Characteristic, Free Water And Particulate Testing (ASTM Standard Test Methods D3948, D7224, D7261 & D4860)(D3948 is included in Specifications D1655 and D7566) For quality control p

Sell Electronic Tensile and Compression Testing Machine

20240803

Testing Machine This machine is applied in analysis and research of statics property testing of tensile, compression, bending, cutting, holding and other items of metal and nonmetal material (includi

Film-stretching Instrument | Laboratory Film Stretching Machine

20240628

Film-stretching Instrument | Laboratory Film Stretching Machine APPLICATION New product development in the feld of high-end film. Test and analyze physical and chemical properties of new material fil

Program Temperature Chamber

20240624

Material Shell material Cold rolled sheet steel, spray plastics on surface Internal material Stainless steel Thermal insulation material Polyurethane foam Refrigeration system Refrigeration mode M

Sand and Dust Test Chamber

20240619

test time, and can also program the blowing dust time and stop time for cycle operation. Material Shell material Cold rolled sheet steel, rust-proof and spray plastics on surface Internal materials

ST-9605 Oxygen (Air) Bomb Ageing Oven

20240615

materials. (Aging test via oxygen and compressed air in specified pressure and temperature). Technical parameters： Maximum pressure: 2.5MPa Safety blow-up pressure: 2.7~3 MPa Pressure gauge: 0~4MPa

IEC60529 IP5X and IP6X Sand Dustproof Test Chamber

20240603

test L, GB4208-2008, IEC60529 (IP code), GB7001-1986 and etc. This equipment is mainly used in IP5X and IP6X testing about the leakproofness of the enclosure. Features: 1. Applied for IP5X and IP6X T

Gear Measuring Machine for Worm Wheel Rotary Table,Bevel Gear,

20240531

Gear Measuring Machine for Worm Wheel Rotary Table,Bevel Gear Features: The main components of the instrument are made of natural granite material,with a fixed structure, no deformation, and good the

F105/F305/F505/F505H Advanced Test Stand Frame

20240530

material properties, an optional Materials Testing Calculations Module is available. This module provides a range of standard calculations, including tensile strength, Young’s modulus, yield point,

Professional FI Manufacturer for Power Distribution Network Intellegent Wireless Office System

20240520

material； n. In waking up state(wireless setting model),During 7 minutes, without operate, there will be auto reset.(Tips: in waking up state, FI prohibited fault test) Function display Flag state

HTT-02 Hot Tack Tester

20240517

testing is importance for upgrading materials and packing efficiency. Advantages of HTT-02 Hot Tack Tester 1.Hot Tack Measurement: The instrument measures the hot tack strength of packaging materials

Digital Test Hammer Manufacturer

20240430

test hammer which combines data processor and test hammer into one unit. It is widely used for non destructive testing quality of concrete and building materials in finished structure or prefabricate

Integrated X-ray Digital Imaging System

20240422

testing of shrinkage porosity, slags in aluminum casting, magnesium casting, nonmetal materials, and other combining materials. Digital image and main function ●　The product owns a special image

KRD102 Clamping Force Tester

20240416

materials testing equipment, please visit our website. CME mechanical environment testing equipment covers wide range of testing, including shock test, vibration test, constant acceleration test, dro

ICONE2

20200511

testing. Heat release is the key measurement required to assess the fire development of materials and products. Traditionally it has been very difficult to measure and more recently full scall testin

PC Servo Control Hydraulic Universal Testing Machine

20230330

Computer Controlled Electro-hydraulic Servo Universal Testing Machine They are suitable to test various metallic & non-metallic materials for tension, compression, flexure, bending and shearing stren

Sterility Test Closed Canister

20230721

test device. Sterilization EtO Sterilization Gamma irradiated sterilization Feature ＊Adopt all imported original pharmaceutical grade material, without chemical releasing. ＊Ultrasonic welding p

Universal Testing Machine-UTM

20190518

testing machine is designed and produced conform to GB/228-2010, mainly used to execute the tension, compression, bending, shearing etc. test for metal material. Attached simple accessories and devic

WDW Electronic Pellets Compression Testing Machine

20120515

Test Method for Determination of Crushing Strength of Iron Ore Pellets. If equipped with proper accessories, it also can perform compression test for other materials. Main technical specification: 1

ST-6606 Cable Flexing Tester

20201002

material and make the surface oxidation and the spec controller board etc. Main Function: 1. Test sample: two-core single-phase, three-phase three-line, three-phase four-line 2. Test method: Empty, S

WASP-XM-R-SF6 Pump-priming Portable SF6 Gas Detector

20170411

material PC Dimensions 228* 84 * 50.5mm Installation Handheld / Stand-in Weight 0.55 kg Protection Class IP65 Certification CE Warranty 12 months Applications Petroleum, petrochemical, chemical, env

AS-2011 Micron Laser Particle Size Analyzer 0.1-500um

20100926

Material SB2005 Motto -Reliable Hardware -Accurate Software -Cost-Effective Unit Applications Abrasives, Adhesives, Agrochemical, Barite, Batteries, Bentonite, Boron Carbide, Brucite, Bubble, Calcite

Electronic Universal Testing Machine

20211029

testing of tensile, compression, bending, cutting, holding and other items of metal and nonmetal material (including composite material). It can achieve ReH, ReL, Rp0.2, Fm, Rt0.5 , Rt0.6, Rt0.65, Rt

Model CLG-160 Aluminium Wheel RTR System

20140520

Testing target Material: Mg alloy, AI alloy, Ti alloy Diameter:12 inches-26 inches Height: 4 inches-15 inches Casting technology: low pressure casting, gravity casting Technical parameter Max penetra

STYE-2000D Analogue Display Compression Testing Machine

20150827

testing; six-dimensional gamut; with high precision; easy to operate. Application Compression test of building materials including concrete, cement, airbrick, fire proofing tile, engineering ceramic

Nuclear Radiation Detector Geiger Counter

20230308

testing, radiation processing enterprises, health and epidemic prevention, radiation therapy, nuclear laboratories, nuclear power plants, import and export commodity inspection, building materials, p

Ozone Test Chamber,Ozone Colorfastness Tester AATCC 109 ISO 105 G03 ASTM D1149

20200216

material made of high density glass fiber; 4.Air supply system use long axis fan motor ,resistant to high and low temperature alloy multi-wing wind wheel, to achieve forced convection vertical diffu

V-Sorb 2800TP Surface Area and Porosimtery Analyzer

20240118

testing. It equipped with our multi pioneered technologies these make its performance much better, heighten accuracy and consistence of results, enhance measurement stability, all these lead to a lea

KRD101 Custom Printed Packaging Cardboard Compression Testing Machine

20240402

testing equipment for corrugated packaging performance and comprehensive indicators, and is an ideal testing equipment for papermaking, packaging, commodity inspection, scientific research and other

Brightness Meter

20120615

test the optical performance of sheet materials, for example, opacity test. APPLICATIONS: Paper, Board, Pulps, Chemical fiber, Textile, Plastic, Ceramic, Enamel, Fecula, Salt, White cerement, Porcela

VSM Vibrating Sample Magnetometer M-H Curve Hysteresis Graph Test System Magnetic Properties

20230522

material. The alternating magnetic field induces an electric field in the pickup coils of the VSM. The current is proportional to the magnetization of the sample - the greater the induced current, th

Hot Sale Surface Roughness Tester SRT-6200

20230607

Test Principle Inductance type Radius of Probe Pin 10 um Material of Probe Pin Diamond Measurement Force of Probe 16 mN（1.6 gf） Probe Angle 90° Vertical Radius of Guiding Head 48 mm Maximum driv

Phantomlab Catphan 710 Set

20230823

material on the front end of the phantom. The set includes two oval body annuli to test the systems with body levels of attenuation. The two annuli are 20cm long with oval diameters of 25-35cm and 30

CLEAN-EFF01 Cleaning Efficacy Tester

20231101

Tester is suitable for cleaning performance testing of products such as cleaning cloths, floor mops, mops, piling rags, etc., and can simulate the cleaning performance test of fabric materials on sur

Reliable and Good Servo System Carton Compression Testing Machine Boxes Tester

20210424

material14. Main engine color: army green15. Computer control, pressure curve display16. Special functions: tension and pressure holding test17. Protection device: including up and down stroke contro

Used Olympus Omniscan MX2 PA Flaw Detector

20230821

Olympus Omniscan MX2 Olympus Omniscan MX2 increases testing efficiencies, ensuring superior manual and advanced AUT application performance with faster setups, test cycles, and reporting, in addition

Falling Dart Impact Tester

20231016

test indicates material ability to resist external force. The FDT-01 Falling Dart Impact Tester is a specialized testing device designed for measuring the resistance performance of various materials

IEC60068-2-75 Spring Impact Hammer for IK01 IK02 IK03 IK04 IK05 IK06 and IK07 Impact Test

20210722

Test IK level IK07 IK01 to IK06 Error ±5% ±10% Equivalent mass 500g±5g 250g±5g Radius of hammer R25mm R10mm Weight 1250g 1250g Trigger force ＜10N ＜10N Material of hammer steel Polyamide Mate

Ultra High Pressure Seals

20230706

materials such as polytetrafluoroethylene (PTFE), carbon-graphite, and other high-performance polymers. The design and material selection of UHP seals must consider factors such as pressure, temperat

SciAps X-555 Handheld XRF Analyzer

20230815

test software, materials and engineering for improved performance in high ambient temperatures and outstanding heat dissipation. Customize for your job“The X-555 doesn’t make compromises. It does

DL400 Pro Smart Screen Tester

20230908

Tester Product model: DL400pro color: green material: metal Product size: 75*156*12MM Battery capacity: 3460mAh Product weight: 220G Input voltage: DC5V~2A Charging port: TYPE-C Working humidity: <90

China Enviclone Programmable Walk in Large Size Salt Fog Spray Corrosion Test Chamber

20240113

Overview The Walk in Salt Spray Chambers can be used as a corrosion test and can also be used to test the deterioration of non-metallic materials caused by the influence of salt spray and can also be